HPLC-FLD determination of 4-nonylphenol and 4-<Emphasis Type="Italic">tert</Emphasis>-octylphenol in surface water samples

A simple, sensitive and reliable HPLC-FLD method for the routine determination of 4-nonylphenol, 4-NP and 4-tert-octylphenol, 4-t-OP content in water samples was developed. The method consists in a liquid–liquid extraction of the target analytes with dichloromethane at pH  3.0–3.5 followed by the HPLC-FLD analysis of the organic extract using a Zorbax Eclipse XDB C8 column, isocratic elution with a mixed solvent acetonitrile/water 65:35, at a flow rate of 1.0 mL/min and applying a column temperature of 40°C. The method was validated and then applied with good results for the determination of 4-NP and 4-t-OP in Ialomi?a River water samples collected each month during 2006. The concentration levels of 4-NP and 4-t-OP vary between 0.08–0.17 μg/L with higher values of 0.24–0.37 μg/L in the summer months for 4-NP, and frequently <0.05 μg/L but also between 0.06–0.09 μg/L with higher values of 0.12–0.16 μg/L in July and August for 4-t-OP and were strongly influenced by sesonial and anthropic factors. The method was also applied on samples collected over 2 years 2007 and 2008 from urban wastewaters discharged into sewage or directly into the rivers by economic agents located in 30 Romanian towns. Good results were obtained when the method was used for analysis of effluents discharged into surface waters by 16 municipal wastewater treatment plants, during the year 2008.     

UVC disinfection robot

Environmental Science and Pollution Research - The aim of the present work is to contribute in the fight against the spread of Covid-19, a novel human coronavirus, in hospitals, public transport,...     

Photodegradation of organic pollutants on the spruce needle wax surface under laboratory conditions

The photochemistry of selected organic compounds, including common pollutants, on the paraffin (as a model matrix) and spruce wax surfaces was studied under laboratory conditions. Two model transformations were evaluated: (1) intramolecular rearrangements of valerophenone and 2-nitrobenzaldehyde, and (2) hydrogen abstraction between an excited benzophenone and the hydrocarbon paraffin/wax chains. The steric or polar influence of the solid matrix on conformational and translational motion, its optical properties, hydrogen abstraction probabilities, and consequences of the guest-molecule segregation are discussed in this work. Furthermore, the photochemical reactivity of some common anthropogenic pollutants, such as chlorinated biphenyls (4-chlorobiphenyl, 2,4-dichlorobiphenyl, and 4,4'-dichlorobiphenyl), 4-chlorophenol, and DDT, was evaluated. The surface of spruce wax is presented as probable reaction medium for photochemical transformations. Although the matrix presents certain restrictions for bimolecular reactions, common photodegradations should be generally feasible in nature. In addition, paraffin was found to be a suitable model matrix for the studies of possible photochemical transformations that can occur on natural plant surfaces.     

Environmental exposure to PCBs and cancer incidence in eastern Slovakia

In a population-based cross-sectional study, we compared serum levels of 15 polychlorinated biphenyl (PCB) congeners and three organochlorine pesticides in residents of two districts in eastern Slovakia, one with extensive environmental contamination from a former PCB production site (Michalovce) and the other matched on geography but with low (background) levels (Svidnik). The age-adjusted geometric means for sum of 15 measured PCB congeners were statistically significantly higher in subjects from the Michalovce district for both sexes: 3327.6 versus 1331.4 ng/g of lipid in males, 2751.8 versus 992.2 ng/g of lipid in females. Levels of DDE and DDT were also significantly higher, although the absolute differences were less pronounced. There was no substantial difference in HCB levels between the districts. We also conducted an ecologic study to compare cancer incidence occurring in these same two districts from 1985 through 1994. We calculated standardized incidence ratios (SIRs) and 95% confidence intervals for each district using indirect standardization and rates from eastern Slovakia. Among males from Michalovce (exposed), but not Svidnik (unexposed), there was an excess of cancer of the tongue (SIR=1.46; 1.06-1.96), stomach (SIR=1.15; 1.00-1.32), lung (SIR=1.14; 1.04-1.24), testis (SIR=1.40; 0.97-1.97), and kidney (SIR=1.23; 0.98-1.52), and lower than expected incidence of prostate cancer (SIR=0.83; 0.69-0.97); in contrast, there was an excess of peritoneal (SIR=3.05; 1.11-6.63) and laryngeal cancer (SIR=1.43; 0.99-1.98) in Svidnik not observed Michalovce. Among females from Michalovce, but not Svidnik, there was an excess of cancer of the lip (SIR=2.54; 1.53-3.96), stomach (SIR=1.22; 1.02-1.44), and lung (SIR=1.17; 0.94-1.45); in contrast, there was an excess of kidney (SIR=1.61; 1.03-2.40) and thyroid (SIR=1.97; 1.12-3.20) cancer in Svidnik not observed in Michalovce. Taken together, these results raise the possibility that high environmental exposure to organochlorines in the Michalovce district may be associated with higher rates of certain cancers, particularly stomach and lung cancer.     

Bioleaching of zinc and copper from anaerobically digested swine manure: effect of sulfur levels and solids contents.

Anaerobically digested swine manure (ADSM) generally contains high concentrations of zinc (Zn) and copper (Cu). These metals levels exceed the land application regulations of municipal biosolids of many European countries and are on the borderline of exceptional quality in the U.S. Environmental Protection Agency (U.S. EPA) 40 CFR part 503 standards. From this perspective, a series of batch tests were conducted to evaluate the feasibility of bioleaching of Zn and Cu from ADSM so that the produced biosolids could safely be applied to land. The effect of different substrate levels (sulfur) and total solids content (as high as 9%) on metal solubilization was investigated. The results showed that metal solubilization efficiency for both Zn and Cu declined significantly with an increase in total solids from 3 to 6% and then to 9% at the same substrate level. Metal solubilization increased proportionately with increases in substrate concentration up to 6% of total solids content. However, at 9% total solids content, metal solubilization was insignificant at all substrate levels tested. At a 6% total solids level and 10 000 mg/L of substrate, 94% of Zn and 72% of Cu were solubilized. Bioleaching was also found to be effective in destruction of pathogens with approximately 2.5 log-scale reduction. The residual biosolid was found to meet the Class A biosolids standands of U.S. EPA 40 CFR part 503.     

Cloning and expression of α-amylase in E. coli: genesis of a superior biocatalyst for substrate-specific MFC

One of the most practical approaches for establishing a successful microbial fuel cell (MFC) is to fasten the oxidation rate of the substrate by the microorganisms to get quick paced electron transfer between microbes and electrode. A genetically modified Escherichiacoli, overexpressing α-amylase, is constructed and applied as biocatalyst in MFC using starch as substrate. The results are compared with nonrecombinant, native E.coli. The results show better performance for the MFC containing the recombinant strain demonstrated by higher power density (PD), lower resistance, and significant electrochemical activity. Maximum PD has been recorded as 279.04 mW m^?2 compared to 120.33 Mw m^?2 for the MFC operated with nonrecombinant E.coli. The impedance results also suggest the effectiveness of the recombinant strain by lowering the internal resistance by more than half order as compared to the nonrecombinant one. These results affirm that the engineered strain can be used as a superior biocatalyst in contrast to the native strain and by using the technique of genetic alteration; gene of interest can be inserted based on the substrate to be treated. So, this work gives a useful insight for accomplishing successful MFC operation with the use of bacterial stains engineered at the molecular level.     

Gastroenteric Viruses Detection in a Drinking Water Distribution-to-Consumption System in a Low-Income Community in Rio de Janeiro

Food and Environmental Virology - The availability of drinking water is one of the main determinants of quality of life, disease prevention and the promotion of health. Viruses are important agents...     

Suitability of selected bioindicators of atmospheric pollution in the industrialised region of Ostrava,Upper Silesia,Czech Republic

This study is a continuation of our preceding research identifying suitable environmental samples for the tracing of atmospheric pollution in industrial areas. Three additional types of environmental samples were used to characterise contamination sources in the industrial area of Ostrava city, Czech Republic. The region is known for its extensive metallurgical and mining activities. Fingerprinting of stable Pb isotopes was applied to distinguish individual sources of anthropogenic Pb. A wide range of ²⁰⁶Pb/²⁰⁷Pb ratios was observed in the investigated samples: ²⁰⁶Pb/²⁰⁷Pb = 1.168–1.198 in mosses; ²⁰⁶Pb/²⁰⁷Pb = 1.167–1.215 in soils and ²⁰⁶Pb/²⁰⁷Pb = 1.158–1.184 in tree cores. Black and brown coal combustion, as well as metallurgical activities, is the two main sources of pollution in the area. Fossil fuel burning in industry and households seems to be a stronger source of Pb emissions than from the metallurgical industry. Concentration analyses of tree rings showed that a significant increase in As concentrations occurred between 1999 and 2016 (from 0.38 mg kg^?1 to 13.8 mg kg^?1). This shift corresponds to the use of brown coal from Bílina, Czech Republic, with an increased As concentration. The burning of low-quality fuels in households remains a problem in the area, as small ground sources have a greater influence on the air quality than do industrial sources.     

No relationship found between mercury and lead concentrations in muscle and scales of chub Squalius cephalus L.

We examined the relationship between muscle and scale mercury (Hg) and lead (Pb) concentrations in chub Squalius cephalus L. from six riverine sites in the Czech Republic in order to determine whether scale analysis alone could provide a nonlethal and convenient method for prediction of heavy metal concentration in muscle tissue. Our results confirm tissue-specific heavy metal accumulation in chub, with Hg tending to accumulate primarily in muscle tissue and Pb in scales. We found no significant relationship, however, for concentrations of either Pb or Hg between muscle tissue and scales of chub. Our results indicate that scales cannot be used for predicting heavy metal contamination in muscle of chub and we recommend, therefore, that muscle biopsy methods continue as the preferred method of analysis.     

Volatile fatty acid evolution in biomass mixture composts prepared in open and closed bioreactors

In this study we observed the production of volatile fatty acids (VFAs) during the composting process of compost heaps in two different bioreactors (open and closed) at three different depths (0, 40 and 80 cm). The compost was prepared as a mixture of bio-waste, horse manure, grass and sawdust to ensure sufficient pH conditions in compost heaps. VFA contents in the composting materials were analysed weekly over 14–119 d. The degradation process was monitored, along with temperature, pH, total organic carbon, oxidizable carbon and mono- and oligosaccharides. VFA contents were evaluated with regard to the depth of the sample site in the compost heap and to conditions in the bioreactors. The maximum VFA occurrence was observed during the first 35 d; acetic and propionic acids in particular were determined to occur in each sample. Considerable variations in their formation and elimination were observed in the two bioreactors as well as at the various depths in the compost heaps. Significant correlations were found between individual VFAs, as well as between VFA concentrations and organic carbon contents.