Overview of Environmental Hazards and Health Effects of Pollution in Developing Countries: A Case Study of Nigeria

Pollution has taken on a global dimension, and the effects are most obvious in developing countries. The effects take a toll on human health, animals, and vegetation, as well as on soil, air, and water quality. The objective of this article is to discuss the current relationships among pollution, environmental quality, and human health within the frame of anthropogenic activities in developing countries. In addition to personal observations, we review relevant literature on conditions throughout the developing world and case studies on conditions and activities in Nigeria. Key findings show the significant, adverse contributions to human health and environmental risk from current waste generation and handling practices, indoor and outdoor air pollution, wastewater and effluent generation and disposal, the hazardous nature and pollution potential of wastes, and the human behaviors that contribute to pollution in developing countries. There is an urgent need to create awareness among the various segments of society of the human health hazards posed by pollution as well as a need for the comprehensive development and enforcement of appropriate policies to prevent a descent into an abyss of deteriorating human and environmental health.     

The synergistic effect of air mass on outdoor performance for different PV module in India

The effect of air mass (AM) on the performance of multi-crystalline silicon (m-Si), amorphous silicon (a-Si), and hetero-junction with intrinsic thin layer (HIT)-technology-based photovoltaic (PV) modules are evaluated for representative day of four seasons during the year 2011 for composite climate of India. To find the best performing PV module technology with respect to AM at the site, annual energy yields and performance ratio against different AM bands (AM 1–4.5) are plotted. It is found that HIT modules perform better than m-Si and a-Si at each AM band. Annual energy yields for all three technologies decrease with increasing order of AM bands. The performance ratio for HIT and m-SI modules initially increases and then decreases with increasing order of AM bands. However, for a-Si modules, the performance ratio decreases with increasing order of the AM bands.     

Improving invasive species management by integrating priorities and contributions of scientists and decision makers

Managing invasive species is a major challenge for society. In the case of newly established invaders, rapid action is key for a successful management. Here, we develop, describe and recommend a three-step transdisciplinary process (the “butterfly model”) to rapidly initiate action for invasion management. In the framing of a case study, we present results from the first of these steps: assessing priorities and contributions of both scientists and decision makers. Both scientists and decision makers prioritise research on prevention. The available scientific knowledge contributions, however, are publications on impacts rather than prevention of the invasive species. The contribution of scientific knowledge does thus not reflect scientists’ perception of what is essentially needed. We argue that a more objective assessment and transparent communication of not only decision makers’ but also scientists’ priorities is an essential basis for a successful cooperation. Our three-step model can help achieve objectivity via transdisciplinary communication.     

Radiostrontium monitoring of bivalves from the Pacific coast of eastern Japan

In early April 2011, radiostrontium was accidentally released from the Fukushima Daiichi Nuclear Power Plant to the Pacific coast of eastern Japan. We developed a simple procedure to analyze radiostrontium levels in marine mussels (Septifer virgatus) and seawater using crown ether (Sr Resin; Eichrom). Then, we used our method to describe the spatial and temporal distribution of radiostrontium in mussels and seawater on the Pacific coast of eastern Japan from 2011 to 2013 and for 2015. Activity of ⁹⁰Sr in mussels and seawater decreased with distance from the Fukushima Daiichi Nuclear Power Plant and between 2011 and 2013 tended to be higher in areas south of the Fukushima Daiichi Nuclear Power Plant than to the north of it. Activity in mussels and seawater also tended to decrease from 2011 to 2013 and by 2015 had reached levels experienced prior to the Fukushima accident. Our results suggest that radiostrontium discharged from the Fukushima Daiichi Nuclear Power Plant was dispersed by coastal currents in a southerly direction along the Pacific coast of eastern Japan from 2011 to 2013, following which its activity decreased to background levels by 2015.     

Evaluation of the efficacy of a portable LIBS system for detection of CWA on surfaces

Laser-induced breakdown spectroscopy (LIBS) is a laser-based optical technique particularly suited for in situ surface analysis. A portable LIBS instrument was tested to detect surface chemical contamination by chemical warfare agents (CWAs). Test of detection of surface contamination was carried out in a toxlab facility with four CWAs, sarin (GB), lewisite (L1), mustard gas (HD), and VX, which were deposited on different substrates, wood, concrete, military green paint, gloves, and ceramic. The CWAs were detected by means of the detection of atomic markers (As, P, F, Cl, and S). The LIBS instrument can give a direct response in terms of detection thanks to an integrated interface for non-expert users or so called end-users. We have evaluated the capability of automatic detection of the selected CWAs. The sensitivity of our portable LIBS instrument was confirmed for the detection of a CWA at surface concentrations above 15 μg/cm². The simultaneous detection of two markers may lead to a decrease of the number of false positive.     

Healing the wounds in the landscape—reclaiming gravel roads in conservation areas

Reclaiming abandoned and unmaintained roads, built originally for forestry and mineral extraction, is an important part of ecological restoration, because the roads running through natural habitats cause fragmentation. The roads can be reclaimed in a passive way by blocking access to the road, but successful seedling recruitment may require additional management due to the physical constraints present at the road. We established a full factorial study to compare the effects of three road reclaiming measures, namely ripping, creation of safe sites by adding mulch and pine seed addition, on soil processes, recovery of understorey vegetation and seedling recruitment in three conservation areas in eastern Finland. We surveyed soil organic matter, frequency and cover of plant functional types, litter and mineral soil, and number of tree seedlings. The soil organic matter was, on average, 1.3-fold in the 50-cm-deep ripping treatment relative to unripped and 20-cm-deep ripping treatments. The germination and survival of deciduous seedlings and grass establishment were promoted by adding mulch. The addition of pine seeds counteracted the seed limitation and enhanced the regeneration of trees. The treatment combination consisting of ripping, adding mulch and pine seed addition enhanced the vegetation succession and tree-seedling recruitment most: the cover of grasses, herbs and ericaceous dwarf shrubs was 1.3–7.6-fold and the number of coniferous tree seedlings was 3.4–7.1-fold relative to the other treatment combinations. Differences between short-term (1–3 years) and longer-term (6 years) results indicate the need for a sufficient observation period in road reclamation studies.     

Estuarine circulation in the Taranto Seas

The Taranto basin is a shallow water marine system in the South of Italy characterized by the presence of a lagoon environment together with a semi-enclosed bay connected to the Ionian Sea. This marine system experienced over the last few decades strong biochemical pollution and environmental degradation, and it is considered a hotspot study site for economic, ecological and scientific reasons. The aim of this study was to examine, on an annual temporal scale and with high spatial resolution, the main hydrodynamical processes and transport scales of the system by means of a 3D finite element numerical model application, adopting the most realistic forcing available. The model allowed us to assess the role played by baroclinic terms in the basin circulation, describing its estuarine nature. In particular, the main features of water circulation, salinity and temperature distribution, water renewal time and bottom stress were investigated. Our results allowed us to equate this system dynamic to that of a weakly stratified estuary, identifying the main driving sources of this mechanism. The vertical stratification over the whole year was proved to be stable, leading to a dual circulation flowing out on the surface, mainly through Porta Napoli channel, and inflowing on the bottom mainly through Navigabile channel. This process was responsible also for the renewal time faster on the bottom of the Mar Piccolo basin than the surface. Due to the great importance of the Taranto basin for what concerns sediment pollution, also the effect of currents in terms of bottom stress was investigated, leading to the conclusion that only in the inlets area the values of bottom stress can be high enough to cause erosion.     

In situ immobilization of cadmium in soil by stabilized biochar-supported iron phosphate nanoparticles

The potential for nanoscale phosphate amendments to remediate heavy metal contamination has been widely investigated, but the strong tendency of nanoparticles to form aggregates limits the application of this technique in soil. This study synthesized a composite of biochar-supported iron phosphate nanoparticle (BC@Fe₃(PO₄)₂) stabilized by a sodium carboxymethyl cellulose to improve the stability and mobility of the amendment in soil. The sedimentation test and column test demonstrated that BC@Fe₃(PO₄)₂ exhibited better stability and mobility than iron phosphate nanoparticles. After 28 days of simulated in situ remediation, the immobilization efficiency of Cd was 60.2 %, and the physiological-based extraction test bioaccessibility was reduced by 53.9 %. The results of sequential extraction procedures indicated that the transformation from exchangeable (EX) Cd to organic matter (OM) and residue (RS) was responsible for the decrease in Cd leachability in soil. Accordingly, the pot test indicated that Cd uptake by cabbage mustard was suppressed by 86.8 %. Compared to tests using iron phosphate nanoparticles, the addition of BC@Fe₃(PO₄)₂ to soil could reduce the Fe uptake of cabbage mustard. Overall, this study revealed that BC@Fe₃(PO₄)₂ could provide effective in situ remediation of Cd in soil.     

The application of regenerable sorbents for mercury capture in gas phase

Mercury is a well-known toxic element, and flue gas streams emitted from coal-fired utilities are one of the largest anthropogenic sources of this element. This study briefly reviews the proposed technologies for reducing mercury emissions from coal combustion, focusing on an emerging process which involves the use of regenerable sorbents and especially those loaded with noble metals. Among the mercury species formed during coal combustion, elemental mercury is the most difficult to remove from the flue gases due to its low reactivity and insolubility in water. The widespread interest in using regenerable sorbents with metals is due to their ability to retain elemental mercury. With this technology, not only can efficiencies of 100 % be reached in the retention of elemental mercury but also a way to avoid the generation of new wastes loaded with mercury. This study considers the main aspects that must be taken into account when developing effective regenerable sorbents for mercury capture, with special attention to sorbents containing noble metals. The characteristics of this process are compared with those of other processes in a more advanced state of development.