Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications

Increased environmental awareness and interest in long-term sustainability of material resources has motivated considerable advancements in composite materials made from natural fibers and resins, or biocomposites. In spite of these developments the lower stiffness and strength of biocomposites has limited their applications to non-load-bearing components. This paper presents an overview of a study aimed at showing that the shortcomings of biocomposites can be overcome through hybrid material designs and efficient structural configurations to make them suitable for load bearing structural components. Hybrid blends of natural and synthetic fibers can significantly improve the characteristics of biocomposites with minimal cost and environmental impact, and hierarchical cellular designs can maximize material efficiency in structural components. Periodic and hierarchical cellular plate designs made from natural fibers and unsaturated polyester resin were evaluated experimentally and analytically. Stiffness, strength, and dimensional stability of all-biocomposite and hybrid natural–synthetic material systems were evaluated through material tests while structural performance of cellular plate designs was assessed through flexural tests on laboratory-scale samples. The experimental results were correlated with analytical models for short-fiber composites and cellular structures. The results showed that biocomposites have adequate short-term performance and that they can efficiently compete with housing panels made from conventional structural materials.     

Improving the feasibility of aquaculture feed by using microalgae

Environmental Science and Pollution Research - The aquaculture industry is an efficient edible protein producer and grows faster than any other food sector. Therefore, it requires enormous amounts...     

Nanoparticles Addition in Coir‐Basalt‐Innegra Fibers Reinforced Bio-synthetic Epoxy Composites

Journal of Polymers and the Environment - In the present investigation, the influence of coir micro-particles and titanium carbide (TiC) nanofillers on mechanical characteristics and thermal...     

Experimental investigation on the effect of liquid phase and vapor phase separation over performance of falling film evaporator

Energy, cost, and environmental concerns play a vital role in understanding governing parameters of distributor design in falling film evaporators. Distributor design is a hidden parameter in many experimental papers. The uniform distribution of liquid refrigerant over the tube bundle mostly depends on two-phase liquid refrigerant and vapor refrigerant. This work conducted experiments with two distribution systems with and without separation of liquid-vapor refrigerant after expansion valve for the same evaporator capacity with R134a as a refrigerant. Results reveal that; separating vapor refrigerant has a positive impact on the approach of the evaporator with an open system distributor arrangement. The highest delta T and lowest practice are found at a heat flux of 13.97 kW/m² with an available system distributor compared to a closed system with a heat flux of 14.25 kW/m². The open system arrangement in the distributor is the novel parameter for distributor design, ensuring uniform distribution with minimum pressure drop and dry suction. An open system distributor has an average 16.1% capacity increase over a closed system. The experimental analysis helps to understand different parameters for the design of distributors in falling film evaporators for uniform distribution.     

Linking parks and people: Nepal's experience in resolving conflicts in parks and protected areas

SUMMARY

The search for innovative methods for improving relations between parks and people has led to various conservation and development projects around the world. Nepal's almost three decades of experience in park management in a variety of institutional settings offers valuable lessons in the challenges and opportunities for enlisting local support for conservation. Citing several macro and micro-level case studies from around the country, this paper provides a comparative perspective on the significance of tourism-focused conservation and community development activities in resolving conflicts between parks and local people.     

Organochlorines in urban soils from Central India: probabilistic health hazard and risk implications to human population

This study presents distribution of organochlorines (OCs) including HCH, DDT and PCBs in urban soils, and their environmental and human health risk. Forty-eight soil samples were extracted using ultrasonication, cleaned with modified silica gel chromatography and analyzed by GC-ECD. The observed concentrations of ∑HCH, ∑DDT and ∑PCBs in soils ranged between?<?0.01–2.54, 1.30–27.41 and?<?0.01–62.8 µg kg^?1, respectively, which were lower than the recommended soil quality guidelines. Human health risk was estimated following recommended guidelines. Lifetime average daily dose (LADD), non-cancer risk or hazard quotient (HQ) and incremental lifetime cancer risk (ILCR) for humans due to individual and total OCs were estimated and presented. Estimated LADD were lower than acceptable daily intake and reference dose. Human health risk estimates were lower than safe limit of non-cancer risk (HQ?<?1.0) and the acceptable distribution range of ILCR (10^?6–10^?4). Therefore, this study concluded that present levels of OCs (HCH, DDT and PCBs) in studied soils were low, and subsequently posed low health risk to human population in the study area.     

Modelling N mineralization from green manure and farmyard manure from a laboratory incubation study

Predicting N mineralization from organic manures like farmyard manure (FYM) is more difficult than from fresh organic materials like crop residues, as the manures vary greatly in composition. A laboratory incubation experiment was carried out for 98 days at 30 °C under aerobic conditions to study the effects on N dynamics of Gliricidia (Gliricidia sepium, Jacquin) and FYM application to soil at 5 and 10 g kg⁻¹. Application of Gliricidia induced N mineralization from the start of incubation period, with the amount of N mineralized increasing with rate of application. In contrast, application of FYM resulted in immobilization of mineral N in soil, irrespective of the rate of application. The initial net immobilization from FYM was limited by availability of N in the soil for the higher rate of application.We used the APSIM SoilN module to simulate these contrasting patterns of mineralization of N from Gliricidia and from FYM. The prediction of N mineralized from Gliricidia was better than FYM. The default model parameters specify that the fresh organic matter pools (FPOOL1, FPOOL2 and FPOOL3) have the same C:N ratio and this assumption was ineffective in predicting N mineralized from FYM. The predictive ability of the model improved when this default assumption was modified based on the size of the individual pools (FPOOL1, FPOOL2 and FPOOL3), and the pool's C:N ratios. The modelling efficiency, a measure of goodness of fit between the simulated and observed data, improved markedly for the modified model. The discrepancy between the modelled and observed data was a tendency for the model to underestimate the rate of re-mineralization at the lower rate of application of FYM in the later part of incubation. Unfortunately the appropriate modification to the size and C:N ratios of the FPOOLs could not be determined on the basis of chemical analysis alone. Thus, a true predictive application of the model to a new FYM material is not yet possible.     

Non-thermal plasmas for disease control and abiotic stress management in plants

Environmental Chemistry Letters - Climate change is predicted to cause severe loss in agricultural production by increasing disease epidemics and intensifying&nbsp;abiotic stresses. Therefore,...     

Evaluating Local Benefits from Conservation in Nepal’s Annapurna Conservation Area

Protected areas are integral to the global effort to conserve biodiversity, and, over the past two decades, protected area managers have begun to recognize that conservation objectives are next to impossible to achieve without considering the needs and concerns of local communities. Incentive-based programs (IBPs) have become a favored approach to protected area management, geared at fostering local stewardship by delivering benefits tied to conservation to local people. Effective IBPs require benefits to accrue to and be recognized by those experiencing the greatest consequences as a result of the protected area, and those likely to continue extractive activities if their livelihood needs are compromised. This research examines dispersal of IBP benefits, as perceived by local residents in Nepal's Annapurna Conservation Area. Results reported here are based on questionnaire interviews with 188 households conducted between September and December 2004. Results indicate that local residents primarily identify benefits from social development activities, provisions for resource extraction, and economic opportunities. Overall, benefits have been dispersed equally to households in villages on and off the main tourist route, and regardless of a household's participation in tourism. However, benefits are not effectively targeted to poorer residents, those highly dependent on natural resources, and those experiencing the most crop damage and livestock loss from protected wildlife. This article provides several suggestions for improving the delivery of conservation incentives.