Ammonia concentrations and modeling of inorganic particulate matter in the vicinity of an egg production facility in Southeastern USA

Ammonia (NH₃) is an important base gas and can react with acidic species to form atmospheric aerosols. Due to the rapid growth of poultry and swine production in the North Carolina Coastal Plain, atmospheric NH₃ concentrations across the region have subsequently increased. Ammonia concentrations and inorganic particulate matter (PM) at four ambient stations in the vicinity of an egg production facility were measured for 1 year using PM_2.5 speciation samplers with honeycomb denuders and ion chromatography (IC). Meanwhile, concentrations of NH₃ and inorganic PM in one of the egg production houses were also simultaneously measured using a gas analyzer for NH₃ and the filter pack plus IC method for inorganic PM. An equilibrium model-ISORROPIA II was applied to predict the behavior of inorganic aerosols in response to precursor gas concentrations and environmental parameters. Average ambient NH₃ concentrations varied from 10.0 to 27.0 μg/m³, and they were negatively correlated with the distances from the ambient location to the nearest egg production house exhausts. Ambient NH₃ concentrations were higher in warm seasons than in cold seasons. Measured NH₃ concentrations agreed well with ISORROPIA II model predictions at all sampling stations. For the ambient stations, there was a good agreement in particle phase NH₄ ⁺ between the model simulation and observations. For the in-house station, the model simulation was applied to correct the overestimation of particle phase NH₄ ⁺ due to gas phase NH₃ breaking through the denuders. Changes in SO₄ ^2?, NO₃ ^?, and Cl^? yield proportional changes in inorganic PM mass. Due to the abundance of NH₃ gas in the vicinity area of the monitored farm, changes in NH₃ concentrations had a small effect on inorganic PM mass. Aerosol equilibrium modeling may be used to assess the influence of precursor gas concentrations on inorganic PM formation when the measurements for some species are unavailable.     

Seasonal variation in physicochemical properties of coastal waters of Kalpakkam, east coast of India with special emphasis on nutrients

A study pertaining to the seasonal variation in physicochemical properties of the coastal waters was carried out at Kalpakkam coast for a period of 1 year (February 2006 to January 2007). It revealed that the coastal water was significantly influenced by freshwater input during North East (NE) monsoon and post-monsoon periods. Concentration of all the nutrients and dissolved oxygen (DO) was relatively high during the NE monsoon, whereas, salinity and chlorophyll-a (chl-a) were at their minimum level during this period. Phytoplankton production peak was observed in summer during which a typical marine condition prevailed. The present observed values of nitrate, phosphate, silicate, and turbidity are significantly high (five to ten times) compared to that of the pre-Tsunami period from this coast. Relatively low DO and chl-a concentration was noticed during the post-Tsunami period. A notable feature of this study is that though nutrient concentration in the coastal waters during post-Tsunami period has increased significantly, turbidity, the most single dominating factor, was found to adversely affect the phytoplankton production during post-Tsunami period as reflected by relatively low chl-a concentration. Thus, the post-Tsunami period may result in a change in coastal biodiversity pattern concomitant with change in coastal water quality.     

Methane oxidation and abundance of methane oxidizers in tropical agricultural soil (vertisol) in response to CuO and ZnO nanoparticles contamination

There is worldwide concern over the increase use of nanoparticles (NPs) and their ecotoxicological effect. It is not known if the annual production of tons of industrial nanoparticles (NPs) has the potential to impact terrestrial microbial communities, which are so necessary for ecosystem functioning. Here, we have examined the consequences of adding the NPs particularly the metal oxide (CuO, ZnO) on CH₄ oxidation activity in vertisol and the abundance of heterotrophs, methane oxidizers, and ammonium oxidizers. Soil samples collected from the agricultural field located at Madhya Pradesh, India, were incubated with either CuO and ZnO NPs or ionic heavy metals (CuCl₂, ZnCl₂) separately at 0, 10, and 20 μg g^?1 soil. CH₄ oxidation activity in the soil samples was estimated at 60 and 100 % moisture holding capacity (MHC) in order to link soil moisture regime with impact of NPs. NPs amended to soil were highly toxic for the microbial-mediated CH₄ oxidation, compared with the ionic form. The trend of inhibition was Zn 20?>?Zn 10?>?Cu 20?>?Cu 10. NPs delayed the lag phase of CH₄ oxidation to a maximum of 4-fold and also decreased the apparent rate constant k up to 50 % over control. ANOVA and Pearson correlation analysis (α?=?0.01) revealed significant impact of NPs on the CH₄ oxidation activity and microbial abundance (p?<?0.0001, and high F statistics). Principal component analysis (PCA) revealed that PC1 (metal concentration) rendered 76.06 % of the total variance, while 18.17 % of variance accounted by second component (MHC). Biplot indicated negative impact of NPs on CH₄ oxidation and microbial abundance. Our result also confirmed that higher soil moisture regime alleviates toxicity of NPs and opens new avenues of research to manage ecotoxicity and environmental hazard of NPs.     

Persistence of thiacloprid residues on brinjal (Solanum melongena L.)

Thiacloprid, a neonicotinoid insecticide with novel mode of action, is found to be effective against several lepidopteran as well as hemipteran pests. The present studies were carried out to observe the persistence pattern of thiacloprid on brinjal and to suggest suitable waiting period for the safety of consumers. Persistence of thiacloprid in brinjal was studied following three applications of thiacloprid (Alanto 240 SC) at 180 and 360 g a.i. ha^?1 at 7 days interval. Residues of thiacloprid in brinjal were estimated by high-performance liquid chromatography and were confirmed by liquid chromatography–mass spectrometry. The average initial deposits of thiacloprid were observed to be 0.48 and 1.05 mg?kg^?1 on the brinjal fruit following third application of thiacloprid at recommended and double the recommended dosages, respectively. Half-life periods for thiacloprid were found to be 0.47 and 0.50 days at single and double the application rates, respectively. Residues of thiacloprid declined below its limit of quantification of 0.05 mg?kg^?1 after 3 and 5 days, respectively, at recommended and double the recommended application rates. Therefore, the use of thiacloprid does not seem to pose any risk hazard and a waiting period of 1 day is suggested for safe consumption of brinjal fruits.     

Environmental studies on river water quality with reference to suitability for agricultural purposes: Mahanadi river estuarine system, India – a case study

Hydrochemistry of surface water (pH, specific conductance, total dissolved solids, sulfate, chloride, nitrate, bicarbonate, hardness, calcium, magnesium, sodium, potassium) in the Mahanadi river estuarine system, India was used to assess the quality of water for agricultural purposes. The samples were studied for 31 different stations during six different seasons in the years 2001-2003. Chemical data were used for mathematical calculations (SAR, Na%, RSC, potential salinity, permeability index, Kelly's index, magnesium hazard, osmotic pressure and salt index) for better understanding the suitability river water quality for agricultural purposes. The river water is free from nitrate-nitrogen hazard and has much less osmotic pressure and RSC values. Further there is no complete precipitation of calcium and magnesium in the study area. The results revealed that waters of some polluted stations like Sambalpur down (D/s of Sambalpur town) and Kathjodi (Cuttack) down (D/s of Cuttack town) are unsuitable up to some extent, where as it is quite unsuitable in case of estuarine samples during the pre-monsoon and post-monsoon seasons. The results were verified by USSL and Wilcox diagrams, which show all the fresh water zone samples (low-medium salinity with low sodium) of the study area are in the 'Excellent to good' category and are suitable to irrigate all soils for semi-tolerant and tolerant as well as sensitive crops.     

Long-term effect of rice-based farming systems on soil health

Integrated rice–fish culture, an age-old farming system, is a technology which could produce rice and fish sustainably at a time by optimizing scarce resource use through complementary use of land and water. An understanding of microbial processes is important for the management of farming systems as soil microbes are the living part of soil organic matter and play critical roles in soil C and N cycling and ecosystem functioning of farming system. Rice-based integrated farming system model for small and marginal farmers was established in 2001 at Central Rice Research Institute, Cuttack, Odisha. The different enterprises of farming system were rice–fish, fish–fingerlings, fruits, vegetables, rice–fish refuge, and agroforestry. This study was conducted with the objective to assess the soil physicochemical properties, microbial population, carbon and nitrogen fractions, soil enzymatic activity, and productivity of different enterprises. The effect of enterprises induced significant changes in the chemical composition and organic matter which in turn influenced the activities of enzymes (urease, acid, and alkaline phosphatase) involved in the C, N, and P cycles. The different enterprises of long-term rice-based farming system caused significant variations in nutrient content of soil, which was higher in rice–fish refuge followed by rice–fish enterprise. Highest microbial populations and enzymatic properties were recorded in rice–fish refuge system because of waterlogging and reduced condition prolonged in this system leading to less decomposition of organic matter. The maximum alkaline phosphatase, urease, and FDA were observed in rice–fish enterprise. However, highest acid phosphatase and dehydrogenase activity were obtained in vegetable enterprise and fish–fingerlings enterprise, respectively.     

Toxicity of various anions associated with methoxyethyl methyl imidazolium-based ionic liquids on Clostridium sp

We investigated the effects on the growth of the anaerobic bacterium, Clostridium sp., of the ionic liquid, 1-methoxyethyl-3-methyl imidazolium [MOEMIM]⁺, derived from imidazolium cation and paired with one of a variety of counter-ions, viz., tetrafluoroborate [BF₄]^-, hexafluorophosphate [PF₆]^-_, trifluoroacetate [CF₃COO]^-, bis(trifluoromethane)sulfonamide [Tf₂N]^-, methane sulfonate [OMS], and 1-butyl-3-methyl imidazolium tetrafluoroborate [BMIM][BF₄]. These anions, in association with [MOEMIM]⁺ lowered the growth rate of the bacterium, showing the following trend: [Tf₂N]^- ≧ [PF₆]^- > [BF₄]^- > [CF₃COO]^- > [OMS]⁻. Anions incorporating fluorine were more toxic than those without it, and their toxicity rose with an increase in the number of fluorine atoms. Also, [MOEMIM]⁺[BF₄]^- was less toxic than [BMIM]⁺[BF₄]^-, probably due to the presence of a methoxyethyl functional group integrated in the cation side chain.     

Development of a variable configuration cascade impactor for aerosol size distribution measurement

In atmospheric aerosol studies, it is often required to use two different impactors, namely, the normal pressure and the low-pressure impactor, to measure the mass-size distribution over a wide size range. From the perspective of rendering the system compact for such measurements, it may be more advantageous to combine the two features in a single instrument. In an effort towards exploring this option, a variable configuration cascade impactor (VCCI) comprising of 7 normal pressure and 4 low-pressure stages has been designed and developed. In configuration-1, it operates as a low-pressure impactor, with a sampling flow rate of 10 L min^?1 and classifies the particles from 0.1 to 21 μm in eleven size classes. In configuration-2, it operates as a normal pressure impactor, with a sampling flow rate of 45 L min^?1, and classifies the particles from 0.53 to 10 μm in seven size classes. As part of performance evaluation of the system, the deposit patterns and the integral performance have been studied. For integral performance, a comparative mass-size distribution measurement between VCCI and standard Andersen impactor was carried out. Its performance was also evaluated against the GRIMM Scanning Mobility Particle Sizer (SMPS) in the common size range of both these instruments and against GRIMM Optical Particle Counter (OPC). In addition to this, VCCI was evaluated for its performance in the PM_x configuration obtained by removing a few of the impactor stages sequentially and measuring corresponding size distribution for every stage removed. Changes in the distribution parameters due to spillover of the deposits of previous stage to remaining stages were within 10%. This variation is well within the generally accepted value for all environmental measurement related applications.     

Utilization of Arachis hypogaea hull, an agricultural waste for the production of activated carbons to remove phenol from aqueous solutions

Arachis hypogaea hulls, an agricultural waste, were used to prepare activated carbon by chemical activation with zinc chloride under four different activation atmospheres. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. The maximum Brunquer-Emmett-Teller (BET) surface area and micropore volume of the activated carbon was found to be 418 m(2)/g and 0.28 cm(3)/g, respectively. The activated carbon developed shows substantial capability to adsorb phenol from aqueous solutions. The kinetic data were fitted to the models of intraparticle diffusion, pseudo-second-order, and Lagergren, and followed more closely the pseudo-second-order chemisorption model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. Solution pH has significant effect on adsorption and the maximum uptake of phenol was reported at pH 3.5.     

Stakeholder-based SWOT analysis for successful municipal solid waste management in Lucknow, India

The present investigation is a case study of Lucknow, the main metropolis in Northern India, which succumbs to a major problem of municipal solid waste and its management. A qualitative investigation using strengths, weaknesses, opportunities and threats analysis (SWOT) has been successfully implemented through this community participation study. This qualitative investigation emphasizes the limited capabilities of the municipal corporation's resources to provide proper facilitation of the municipal solid waste management (MSWM) services without community participation in Lucknow city. The SWOT analysis was performed to formulate strategic action plans for MSWM in order to mobilize and utilize the community resources on the one hand and municipal corporation's resources on the other. It has allowed the introduction of a participatory approach for better collaboration between the community and municipal corporation in Lucknow (India). With this stakeholder-based SWOT analysis, efforts were made to explore the ways and means of converting the possible "threats" into "opportunities" and changing the "weaknesses" into "strengths" regarding a community-based MSWM programme. By this investigation, concrete strategic action plans were developed for both the community and municipal corporation to improve MSWM in Lucknow.