Analytical tools employed to determine pharmaceutical compounds in wastewaters after application of advanced oxidation processes

Today, the presence of contaminants in the environment is a topic of interest for society in general and for the scientific community in particular. A very large amount of different chemical substances reaches the environment after passing through wastewater treatment plants without being eliminated. This is due to the inefficiency of conventional removal processes and the lack of government regulations. The list of compounds entering treatment plants is gradually becoming longer and more varied because most of these compounds come from pharmaceuticals, hormones or personal care products, which are increasingly used by modern society. As a result of this increase in compound variety, to address these emerging pollutants, the development of new and more efficient removal technologies is needed. Different advanced oxidation processes (AOPs), especially photochemical AOPs, have been proposed as supplements to traditional treatments for the elimination of pollutants, showing significant advantages over the use of conventional methods alone. This work aims to review the analytical methodologies employed for the analysis of pharmaceutical compounds from wastewater in studies in which advanced oxidation processes are applied. Due to the low concentrations of these substances in wastewater, mass spectrometry detectors are usually chosen to meet the low detection limits and identification power required. Specifically, time-of-flight detectors are required to analyse the by-products.     

Risk assessment of aquifer storage transfer and recovery with urban stormwater for producing water of a potable quality

The objective of the Parafield Aquifer Storage Transfer and Recovery research project in South Australia is to determine whether stormwater from an urban catchment that is treated in a constructed wetland and stored in an initially brackish aquifer before recovery can meet potable water standards. The water produced by the stormwater harvesting system, which included a constructed wetland, was found to be near potable quality. Parameters exceeding the drinking water guidelines before recharge included small numbers of fecal indicator bacteria and elevated iron concentrations and associated color. This is the first reported study of a managed aquifer recharge (MAR) scheme to be assessed following the Australian guidelines for MAR. A comprehensive staged approach to assess the risks to human health and the environment of this project has been undertaken, with 12 hazards being assessed. A quantitative microbial risk assessment undertaken on the water recovered from the aquifer indicated that the residual risks posed by the pathogenic hazards were acceptable if further supplementary treatment was included. Residual risks from organic chemicals were also assessed to be low based on an intensive monitoring program. Elevated iron concentrations in the recovered water exceeded the potable water guidelines. Iron concentrations increased after underground storage but would be acceptable after postrecovery aeration treatment. Arsenic concentrations in the recovered water continuously met the guideline concentrations acceptable for potable water supplies. However, the elevated concentration of arsenic in native groundwater and its presence in aquifer minerals suggest that the continuing acceptable residual risk from arsenic requires further evaluation.     

Impact of mercury emissions from historic gold and silver mining: Global modeling

We compare a global model of mercury to sediment core records to constrain mercury emissions from the 19th century North American gold and silver mining. We use information on gold and silver production, the ratio of mercury lost to precious metal produced, and the fraction of mercury lost to the atmosphere to calculate an a priory mining inventory for the 1870s, when the historical gold rush was at its highest. The resulting global mining emissions are 1630 Mg yr^?1, consistent with previously published studies. Using this a priori estimate, we find that our 1880 simulation over-predicts the mercury deposition enhancements archived in lake sediment records. Reducing the mining emissions to 820 Mg yr^?1 improves agreement with observations, and leads to a 30% enhancement in global deposition in 1880 compared to the pre-industrial period. For North America, where 83% of the mining emissions are located, deposition increases by 60%. While our lower emissions of atmospheric mercury leads to a smaller impact of the North American gold rush on global mercury deposition than previously estimated, it also implies that a larger fraction of the mercury used in extracting precious metals could have been directly lost to local soils and watersheds.     

Environmental,climate and social leadership of small enterprises: Fairphone’s step-by-step approach

ABSTRACT

Achieving sustainable consumption and production requires a break with current practices in many sectors, including the smartphone sector. Leaders are central actors in catalysing such change by developing, implementing and promoting innovative ideas, products and practices. Not only large but also small enterprises can aspire to assume leadership for sustainability. This contribution explores the environmental, climate and social leadership of the social enterprise Fairphone that seeks to start a movement towards a more sustainable smartphone sector. Endowed with barely any structural power, it relies on other leadership types, especially entrepreneurial leadership, which is based on dialogue, persuasion and coalition-building. Small enterprises can be leaders, but pursuing a goal such as transforming the smartphone sector takes a step-by-step approach targeting different follower groups from suppliers, competitors and consumers to end-of-life processors and policymakers. Those different follower groups are susceptible to different (combinations of) leadership types.     

Audience segmentation to improve targeting of conservation interventions for hunters

Audience segmentation could help improve the effectiveness of conservation interventions. Marketers use audience segmentation to define the target audience of a campaign. The technique involves subdividing a general population into groups that share similar profiles, such as sociodemographic or behavioral characteristics. Interventions are then designed to target the group or groups of interest. We explored the potential of audience segmentation for use in defining conservation target groups with a case study of hunters in Liberia. Using 2 data sets describing households (n = 476) and hunters (n = 205), we applied a clustering method in which infinite binomial mixture models group hunters and households according to livelihood and behavior variables and a simple method to define target groups based on hunting impact (hunting households and high-impact hunters). Clusters of hunters and households differed in their experiences with confiscation of catch at roadblocks and participation in livelihood-support programs, indicating that these interventions operate unevenly across subsets of the population. By contrast, the simple method masked these insights because profiles of hunting households and high-impact hunters were similar to those of the general population. Clustering results could be used to guide the development of livelihood and regulatory interventions. For example, a commonly promoted agricultural activity, cocoa farming, was practiced by only 2% (out of 87) of the largest hunter cluster of nonlocal gun hunters but was prevalent among local trappers, suggesting that assistance aimed at cocoa farmers is less appropriate for the former group. Our results support the use of audience segmentation across multiple variables to improve targeted intervention designs in conservation.     

Fate of Lu(III) sorbed on 2-line ferrihydrite at pH 5.7 and aged for 12 years at room temperature. II: insights from STEM-EDXS and DFT calculations

Environmental Science and Pollution Research - Transformation products of two-line ferrihydrite associated with Lu(III) were studied after 12 years of aging using aberration-corrected...     

Deconstructing compassionate conservation

Compassionate conservation focuses on 4 tenets: first, do no harm; individuals matter; inclusivity of individual animals; and peaceful coexistence between humans and animals. Recently, compassionate conservation has been promoted as an alternative to conventional conservation philosophy. We believe examples presented by compassionate conservationists are deliberately or arbitrarily chosen to focus on mammals; inherently not compassionate; and offer ineffective conservation solutions. Compassionate conservation arbitrarily focuses on charismatic species, notably large predators and megaherbivores. The philosophy is not compassionate when it leaves invasive predators in the environment to cause harm to vastly more individuals of native species or uses the fear of harm by apex predators to terrorize mesopredators. Hindering the control of exotic species (megafauna, predators) in situ will not improve the conservation condition of the majority of biodiversity. The positions taken by so-called compassionate conservationists on particular species and on conservation actions could be extended to hinder other forms of conservation, including translocations, conservation fencing, and fertility control. Animal welfare is incredibly important to conservation, but ironically compassionate conservation does not offer the best welfare outcomes to animals and is often ineffective in achieving conservation goals. Consequently, compassionate conservation may threaten public and governmental support for conservation because of the limited understanding of conservation problems by the general public.     

Universities and Climate Change Mitigation: Advancing Grassroots Climate Policy in the US

Abstract

While US climate change mitigation policy has stalled at the national level, local and regional actors are increasingly taking progressive steps to reduce their greenhouse gas emissions. Universities are poised to play a key role in this grassroots effort by targeting their own emissions and by working with other local actors to develop climate change mitigation programmes. Researchers at the Pennsylvania State University have collaborated with university administrators and personnel to inventory campus emissions and develop mitigation strategies. In addition, they have facilitated a stakeholder-driven climate change mitigation project in one Pennsylvania county and started an ongoing service-learning project aimed at reducing emissions in another county. These campus and community outreach initiatives demonstrate that university-based mitigation action may simultaneously achieve tangible local benefits and develop solutions to broader challenges facing local climate change mitigation efforts. Outcomes include improved tools and protocols for measuring and reducing local emissions, lessons learned about service-learning approaches to climate change mitigation, and methods for creating climate change governance networks involving universities, local governments and community stakeholders.     

Two-phase jet releases,droplet dispersion and rainout I. Overview and model validation

Many accidents involve two-phase releases of hazardous chemicals into the atmosphere. This paper describes the results of the fourth phase of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The objective of Phase IV of the JIP was to generate experimental rainout data for non-flashing experiments, and to develop recommendations for the best methodology to predict rainout [total rainout mass and its spatial distribution (‘distributed’ rainout)].Phase IV of the JIP first included rainout experiments by the UK Health and Safety Laboratory (HSL) for sub-cooled releases of water and xylene with a range of orifice sizes and stagnation pressures. See the companion paper II for further details. Secondly model validation was carried out by DNV Software for these experiments using different correlations for the initial droplet size (Sauter Mean Diameter, SMD), i.e. the CCPS SMD correlation and the Phase III JIP SMD correlation. The validation includes flow rates, droplet size, distributed rainout and cloud temperature drop. Subsequently validation was considered for a wider range of experiments from the literature (sub-cooled and superheated releases) for both SMD and total rainout. Adopted rainout methods comprised both methods including explicit modelling of the droplets (using an extended version of Phast dispersion model UDM), as well as more simple methods based on rainout correlations without droplet modelling. Recommendations are made for the most accurate droplet size and rainout modelling. A modified CCPS UDM droplet size correlation has been shown to agree best against experimental rainout data.     

Improving collection efficiency through remote monitoring of charity assets

Collection costs associated with servicing a major UK charity’s donation banks and collecting unsold goods from their retail shops can account for up to 20% of the overall income gained. Bank and shop collections are commingled and are typically made on fixed days of the week irrespective of the amounts of materials waiting to be collected. Using collection records from a major UK charity, this paper considers what vehicle routing and scheduling benefits could accrue if bank and shop servicing requirements were monitored, the former using remote sensing technology to allow more proactive collection scheduling. A vehicle routing and scheduling algorithm employing tabu search methods was developed, and suggested time and distance savings of up to 30% over the current fixed schedules when a minimum bank and shop fill level of between 50% and 60% was used as a collection trigger. For the case study investigated, this led to a potential revenue gain of 5% for the charity and estimated CO₂ savings of around 0.5 tonnes per week across the fleet of six heterogeneous vehicles.