Phosphorus release from a biosolids-amended sandy spodosol

Most regulations governing biosolids land application do not consider that phosphorus (P) solubility can vary widely among biosolids. Current regulations typically group all biosolids together in one category or group biosolids together with manures. Research has shown that not all biosolids have the same potential to affect the environment when land applied, but the database is limited. The purpose of this study was to characterize P release from several biosolids produced and/or marketed in Florida. A small soil column dynamic laboratory incubation was conducted to assess P release potential. Eleven biosolids and a mineral fertilizer (triple super phosphate) were individually mixed with a typical low-P sorbing Florida soil (Immokalee fine sand) at 56 and 224 kg P ha(-1). Columns were periodically leached over 5.5 mo to attain 60 mL (1/2 pore volume) of drainage in each leaching. Soluble reactive P was determined and summed over the eight leachings to represent total P source release. Cumulative P release (as a percentage of P applied) was greatest from biological P removal (BPR) and BPR-like biosolids and least from heat-dried materials. Phosphorus release from biosolids depends on biosolids treatment type (digestion) and P chemistry, suggesting that biosolids regulations must account for differences in P lability to accurately gauge environmental risk.     

Promoting community involvement at brownfields sites in socio-economically disadvantaged neighbourhoods

Brownfields programmes provide environmental justice to distressed communities by applying private sector remediation and real estate expertise to abandoned and contaminated properties. This study examines how brownfields developers and community support organisations operating in socio-economically disadvantaged neighbourhoods work to increase awareness of projects in the community, build trust between stakeholders and create mechanisms for community members to participate in brownfields decision making. Analysis of case study data from brownfields sites in four US cities shows that developers and non-governmental organisations can play important roles in fashioning redevelopment outcomes which benefit both developers and communities. When standard required outreach efforts are combined with non-traditional community involvement mechanisms, the result is often long-term support for redevelopment projects.     

Nitromusk compounds in San Francisco Bay sediments

Synthetic nitromusk fragrances are used in a wide variety of consumer products and can enter aquatic environments through wastewater effluent. Although nitromusks are known to be hydrophobic, little attention has been paid to their behavior in sediments. A sediment extraction method using sonication was developed and used to analyze samples from San Francisco Bay. Both musk xylene (MX) and musk ketone (MK) were found at low levels, with mean concentrations of 0.034 and 0.038ngg(-1), respectively. The highest concentrations were found in the southernmost region of the Bay. Samples were also analyzed from a nearby tidal channel fed by a wastewater treatment plant outfall. At this location both musk xylene and musk ketone were found at higher concentrations of 0.13-0.24ngg(-1) MX and 1.08-2.74ngg(-1) MK. A metabolite of musk xylene was also found at levels up to 4.08ngg(-1), suggesting that these metabolites may play an important role in the fate of nitromusk compounds. Concentrations of all three compounds were highest at the earliest of four sampling dates, and a geographic survey of sediments along the tidal channel showed that concentrations decreased rapidly with distance from the outfall and were close to background before the channel reached the Bay.     

Mass flux from a non-aqueous phase liquid pool considering spontaneous expansion of a discontinuous gas phase

The partitioning of non-aqueous phase liquid (NAPL) compounds to a discontinuous gas phase results in the repeated spontaneous expansion, snap-off, and vertical mobilization of the gas phase. This mechanism has the potential to significantly affect the mass transfer processes that control the dissolution of NAPL pools by increasing the vertical transport of NAPL mass and increasing the total mass transfer rate from the surface of the pool. The extent to which this mechanism affects mass transfer from a NAPL pool depends on the rate of expansion and the mass of NAPL compound in the gas phase. This study used well-controlled bench-scale experiments under no-flow conditions to quantify for the first time the expansion of a discontinuous gas phase in the presence of NAPL. Air bubbles placed in glass vials containing NAPL increased significantly in volume, from a radius of 1.0 mm to 2.0 mm over 215 days in the presence of tetrachloroethene (PCE), and from a radius of 1.2 mm to 2.3 mm over 22 days in the presence of trans-1,2-dichloroethene (tDCE). A one-dimensional mass transfer model, fit to the experimental data, showed that this expansion could result in a mass flux from the NAPL pool that was similar in magnitude to the mass flux expected for the dissolution of a NAPL pool in a two-fluid (NAPL and water) system. Conditions favouring the significant effect of a discontinuous gas phase on mass transfer were identified as groundwater velocities less than ~0.01 m/day, and a gas phase that covers greater than ~10% of the pool surface area and is located within ~0.01 m of the pool surface. Under these conditions the mass transfer via a discontinuous gas phase is expected to affect, for example, efforts to locate NAPL source zones using aqueous concentration data, and predict the lifetime and risk associated with NAPL source zones in a way that is not currently included in the common conceptual models used to assess NAPL-contaminated sites.     

Household wood heater usage and indoor leakage of BTEX in Launceston,Australia: A null result

A study has been conducted in Launceston, Australia, to determine within households with wood heaters the effect of leakage from the heater and flue on the indoor air concentrations of the pollutants: benzene, toluene, ethylbenzene and xylene (BTEX). The study involved three classes: 28 households without wood heaters, 19 households with wood heaters compliant with the relevant Australian Standard and 30 households with non-compliant wood heaters. Outdoor and indoor BTEX concentrations were measured in each household for 7 days during summer when there was little or no wood heater usage, and for 7 days during winter when there was widespread wood heater usage. Each participant kept a household activity diary throughout their sampling periods. For wintertime, there were no significant differences of the indoor BTEX concentrations between the three classes of households. Also there were no significant relationships between BTEX indoor concentrations within houses and several measures of the amount of wood heater use within these houses. For the households sampled in this study, the use of a wood heater within a house did not lead to BTEX release within that house and had no direct detectable influence on the concentrations of BTEX within the house. We propose that the pressure differences associated with the both the leakiness or permeability of the building envelope and the draught of the wood heater have key roles in determining whether there will be backflow of smoke from the wood heater into the house. For a leaky house with a well maintained wood heater there should be no backflow of smoke from the wood heater into the house. However backflow of smoke may occur in well sealed houses.The study also found that wood heater emissions raise the outdoor concentrations of BTEX in winter in Launceston and through the mixing of outdoor air through the building envelopes into the houses, these emissions contribute to increases in the indoor concentrations of BTEX in winter in all houses in Launceston.     

Responses of herbaceous plants to urban air pollution: Effects on growth, phenology and leaf surface characteristics

Vehicle exhaust emissions are a dominant feature of urban environments and are widely believed to have detrimental effects on plants. The effects of diesel exhaust emissions on 12 herbaceous species were studied with respect to growth, flower development, leaf senescence and leaf surface wax characteristics. A diesel generator was used to produce concentrations of nitrogen oxides (NO_x) representative of urban conditions, in solardome chambers. Annual mean NO_x concentrations ranged from 77 nl l^−l to 98 nl l⁻¹, with NO:NO₂ ratios of 1.4-2.2, providing a good experimental simulation of polluted roadside environments. Pollutant exposure resulted in species-specific changes in growth and phenology, with a consistent trend for accelerated senescence and delayed flowering. Leaf surface characteristics were also affected; contact angle measurements indicated changes in surface wax structure following pollutant exposure. The study demonstrated clearly the potential for realistic levels of vehicle exhaust pollution to have direct adverse effects on urban vegetation.     

Occurrence and sources of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls in surficial sediments of Lakes Superior and Huron

Concentrations and congener profile patterns of 2378-substituted PCDD/Fs and DLPCBs in offshore, nearshore and tributary sediments of Lakes Superior and Huron are reported, and spatial trends and source contributions assessed. PCDD/F concentrations ranged from 5 to 18 000 pg/g dw (Lake Superior) and 3 to 6100 pg/g dw (Lake Huron); DLPCBs ranged from 9 to 11 000 pg/g dw (Lake Superior) and 9 to 27 000 pg/g dw (Lake Huron). Our analysis indicated atmospheric deposition is a primary source to depositional areas of both lakes; however, greater PCDD/F and DLPCB concentrations were observed at several nearshore and tributary sites, and were attributed to corresponding land use in the watershed. Statistical analysis and pattern comparison suggested that industrial inputs mainly associated with wood treatment plants, pulp and paper mills, mining operations, and chlorine-based chemical manufacturing also contributed to contamination by PCDD/Fs and DLPCBs in certain nearshore and offshore areas of Lakes Superior and Huron.     

Trace contamination with dioxin-like chemicals: evaluation of bioassay-based TEQ determination for hazard assessment and regulatory responses

Many recent dioxin contamination events have been traced back to poisoned animal feed or feed ingredients. Therefore, enforcement authorities placed limits on the levels of dioxins in food and feed or implemented strict monitoring and control programs. The levels in force are generally expressed as TEQ values, which inherently accepts the underlying hypothesis that the effects of dioxin-like chemicals are additive. TEQ determination involves either chemo-analysis, with high-resolution gas chromatography in combination with high-resolution mass spectroscopy, or bio-analysis. Bio-analytical methods, more particularly the reporter gene expression method CALUX, are advantageous due to their high throughput rate and low cost. Moreover, the CALUX methodology detects the overall dioxin-like toxicity, rather than the limited number of compounds investigated by chemo-analysis. Bioanalytical methods such as CALUX also differ from chemo-analysis in that the contribution of antagonistic as well as synergistic effects, which violate the additivity principle, can be detected. The application of bio-analytical methods can facilitate a broader assessment of public health risks by intensifying the current monitoring programs in terms of both sample numbers and types. Bio-analysis provides information on the total dioxin-like activity of the samples under study (hazard assessment); however, chemo-analysis is still needed to identify the predominant contaminants (congener identification) for risk management.     

Motivations underpinning honeybee management practices: A Q methodology study with UK beekeepers

Beekeepers are central to pollinator health. For policymakers and beekeeping organisations to develop widely accepted strategies to sustain honeybee populations alongside wild pollinators, a structured understanding of beekeeper motivations is essential. UK beekeepers are increasing in number, with diverse management styles despite calls for coordinated practice to manage honeybee health. Our Q methodology study in Cornwall, UK, indicated five beekeeping perspectives; conventional hobbyists, natural beekeepers, black bee farmers, new-conventional hobbyists and pragmatic bee farmers. Motivations can be shared across perspectives but trade-offs (notably between economic, social responsibility and ideological motivations) result in differing practices, some of which counter ‘official’ UK advice and may have implications for pollinator health and competition. Honeybee conservation emerged as a key motivator behind non-conventional practices, but wild pollinator conservation was not prioritised by most beekeepers in practice. Q methodology has the potential to facilitate non-hierarchical collaboration and conceptualisation of sustainable beekeeping, moving towards co-production of knowledge to influence policy.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-022-01736-w.     

Measurements show that marginal wells are a disproportionate source of methane relative to production

ABSTRACT

Oil and natural gas wells are a prominent source of the greenhouse gas methane (CH₄), but most measurements are from newer, high producing wells. There are nearly 700,000 marginal “stripper” wells in the US, which produce less than 15 barrels of oil equivalent (BOE) d^?1. We made direct measurements of CH₄ and volatile organic carbon (VOC) emissions from marginal oil and gas wells in the Appalachian Basin of southeastern Ohio, all producing < 1 BOE d^?1. Methane and VOC emissions followed a skewed distribution, with many wells having zero or low emissions and a few wells responsible for the majority of emissions. The average CH₄ emission rate from marginal wells was 128 g h^?1 (median: 18 g h^?1; range: 0– 907 g h^?1). Follow-up measurements at five wells indicated high emissions were not episodic. Some wells were emitting all or more of the reported gas produced at each well, or venting gas from wells with no reported gas production. Measurements were made from wellheads only, not tanks, so our estimates may be conservative. Stochastic processes such as maintenance may be the main driver of emissions. Marginal wells are a disproportionate source of CH₄ and VOCs relative to oil and gas production. We estimate that oil and gas wells in this lowest production category emit approximately 11% of total annual CH₄ from oil and gas production in the EPA greenhouse gas inventory, although they produce about 0.2% of oil and 0.4% of gas in the US per year.

Implications: Low producing marginal wells are the most abundant type of oil and gas well in the United States, and a surprising number of them are venting all or more of their reported produced gas to the atmosphere. This makes marginal wells a disproportionate greenhouse gas emissions source compared to their energy return, and a good target for environmental mitigation.