On the shoals of giants: natural catastrophes and the overall destruction of the Caribbean’s archaeological record

In this paper I review a host of natural and cultural processes that have affected the preservation and integrity of archaeological sites on islands in the West Indies, many of which are located in low-lying coastal areas. Given the position of the Caribbean lithospheric plate—juxtaposed between four others—it is no surprise that by its very nature the region is volcanically active and frequently associated with earthquake and tsunami events. This makes coastal zones, and related archaeological sites in the region, highly susceptible to a wide range of destructive natural events. The high frequency of tropical systems (hurricanes and storms) in the Caribbean and rising sea level, coupled with human activities such as sand mining, development, and looting, makes the region’s archaeological record one of the most vulnerable and threatened in the world. Ongoing research is dedicated to understanding how past populations may have been affected by these events in the past.     

Factors associated with multiple-pass procedures during chorionic villus sampling: A video analysis

Multiple placental passes during chorionic villus sampling (CVS) increase the risk of fetal loss; however, specific factors that predispose to repeat aspiration have not been delineated. To identify anatomic and technical variables associated with multiple-pass procedures, a detailed review of 205 videotaped CVS procedures (single pass = 163; multiple pass = 42) was performed, blinded to pregnancy outcome. The route of sampling did not influence the need for multiple aspiration attempts (transabdominal—30/ 135; transcervical—12/70), nor was placental location alone discriminatory. However, the combination of a posterior placenta and uterine retroversion was observed more frequently in the multiple-pass cohort (8/42 vs. 9/163; p<0.05). In transabdominal cases, suboptimal needle placement (e.g., perpendicular to the placental long axis) was more common in the initial aspiration of a multiple-pass procedure (21/30 vs. 38/105;p<0.01), while limited penetration of the catheter tip (e.g., just inside the placental edge) characterized a majority of multiple-pass cases in the transcervical subset (7/12 vs. 3/58; p<0.0001). A case-control cohort was constructed to evaluate the impact of these technical variables on sampling efficacy, independent of the influence of uterine position and placental site. In that analysis, suboptimal location and/or orientation of the sampling device remained characteristic of multiple-pass cases. We conclude that further reduction in the frequency of multiple-pass procedures might be achieved by consistent placement of the device tip in the central placental mass. Unlike amniocentesis, where any point of amnion entry will suffice, this technical nuance should be emphasized with CVS to maximize the single-pass success rate.     

Prenatal ultrasound diagnosis of Apert's syndrome

A mother affected with Apert's syndrome was diagnosed by ultrasound scan at 16–17 weeks to have a fetus similarly affected. The typical features of acrocephaly and symmetrical syndactyly were seen. This is probably the first time that this condition has been diagnosed at such a gestation by ultrasound scan. The patient decided to continue the pregnancy, and intrauterine death occurred at 34 weeks. The diagnosis was confirmed by pathological examination.     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

Invasive species impacts on ecosystem structure and function: A comparison of Oneida Lake, New York, USA, before and after zebra mussel invasion

Exotic species invasion is widely considered to affect ecosystem structure and function. Yet, few contemporary approaches can assess the effects of exotic species invasion at such an inclusive level. Our research presents one of the first attempts to examine the effects of an exotic species at the ecosystem level in a quantifiable manner. We used ecological network analysis (ENA) and a social network analysis (SNA) method called cohesion analysis to examine the effect of zebra mussel (Dreissena polymorpha) invasion on the Oneida Lake, New York, USA, food web. We used ENA to quantify ecosystem function through an analysis of food web carbon transfer that explicitly incorporated flow over all food web paths (direct and indirect). The cohesion analysis assessed ecosystem structure through an organization of food web members into subgroups of strongly interacting predators and prey. Our analysis detected effects of zebra mussel invasion throughout the entire Oneida Lake food web, including changes in trophic flow efficiency (i.e., carbon flow among trophic levels) and alterations of food web organization (i.e., paths of carbon flow) and ecosystem activity (i.e., total carbon flow). ENA indicated that zebra mussels altered food web function by shunting carbon from pelagic to benthic pathways, increasing dissipative flow loss, and decreasing ecosystem activity. SNA revealed the strength of zebra mussel perturbation as evidenced by a reorganization of food web subgroup structure, with a decrease in importance of pelagic pathways, a concomitant rise of benthic pathways, and a reorganization of interactions between top predator fish. Together, these analyses allowed for a holistic understanding of the effects of zebra mussel invasion on the Oneida Lake food web.     

Transport of simazine in unsaturated sandy soil and predictions of its leaching under hypothetical field conditions

The potential contamination of groundwater by herbicides is often controlled by processes in the vadose zone, through which herbicides travel before entering groundwater. In the vadose zone, both physical and chemical processes affect the fate and transport of herbicides, therefore it is important to represent these processes by mathematical models to predict contaminant movement. To simulate the movement of simazine, a herbicide commonly used in Chilean vineyards, batch and miscible displacement column experiments were performed on a disturbed sandy soil to quantify the primary parameters and processes of simazine transport. Chloride (Cl(-)) was used as a non-reactive tracer, and simazine as the reactive tracer. The Hydrus-1D model was used to estimate the parameters by inversion from the breakthrough curves of the columns and to evaluate the potential groundwater contamination in a sandy soil from the Casablanca Valley, Chile. The two-site, chemical non-equilibrium model was observed to best represent the experimental results of the miscible displacement experiments in laboratory soil columns. Predictions of transport under hypothetical field conditions using the same soil from the column experiments were made for 40 years by applying herbicide during the first 20 years, and then halting the application and considering different rates of groundwater recharge. For recharge rates smaller than 84 mm year(-1), the predicted concentration of simazine at a depth of 1 m is below the U.S. EPA's maximum contaminant levels (4 microg L(-1)). After eight years of application at a groundwater recharge rate of 180 mm year(-1) (approximately 50% of the annual rainfall), simazine was found to reach the groundwater (located at 1 m depth) at a higher concentration (more than 40 microg L(-1)) than the existing guidelines in the USA and Europe.     

Co-injection of air and steam for the prevention of the downward migration of DNAPLs during steam enhanced extraction: an experimental evaluation of optimum injection ratio predictions

When steam is injected into soil containing a dense volatile non-aqueous phase liquid contaminant, the DNAPL vaporized within the heated soil region condenses and accumulates ahead of the steam condensation front. If enough DNAPL accumulates, gravitational forces can overcome trapping forces allowing the liquid contaminant to flow downward. By injecting air with steam, a portion of the DNAPL vapor remains suspended in equilibrium with the air, decreasing liquid contaminant accumulation ahead of the steam condensation front, and thus reducing the possibility of downward migration. In a previous work, a theoretical model was developed to predict the optimum injection ratio of air to steam that would eliminate accumulation of DNAPL ahead of the temperature front and thus minimize the potential for downward migration. In this work, the theoretical model is summarized, and an experiment is presented in order to evaluate the optimum injection ratio prediction. In the experiment, a two-dimensional water saturated sand pack is contaminated with a known mass of TCE (DNAPL). The system is then remediated by co-injecting air and steam at the predicted optimum injection ratio, calculated based on the average contaminant soil concentration in the sand pack. Results for the co-injection of air and steam are compared to results for the injection of pure steam or pure air. Injection at the predicted optimum injection ratio for a volumetric average NAPL saturation, reduced accumulation of the contaminant ahead of the condensation front by over 90%, as compared to steam injection alone. This indicates that the optimum injection ratio prediction is a valuable tool for limiting the spreading of DNAPL during steam-enhanced extraction. Injection at the optimum injection ratio resulted in earlier recovery of contaminant than for steam injection alone. Co-injection of steam and air is also shown to result in much higher recovery rates than air injection alone.     

Modeling and data assessment of longitudinal salinity in a low-gradient estuarine river

Continuous data of vertical-profile salinity were analyzed for four stations located successively upriver in a macrotidal estuary, the lower St. Johns River (Northeast Florida, USA). The data analysis confirmed well-mixed salinity conditions in the river with at most 1.3 ppt of vertical variability at Dames Point (river km 20), where the main variations of salinity are along the longitudinal axis of the river. Given the well-mixed salinity conditions and dominant horizontal structure of salinity variations in the river, we present and apply a barotropic, two-dimensional modeling approach for hydrodynamic-salinity transport simulation in the lower St. Johns River. When properly forced by offshore surge, high-resolution wind fields and freshwater river inflows, the model replicated the salinity measurements remarkably well, including the separation into tidal and sub-tidal components. The data and model results show that, at times, offshore winds and surge can be more influential on longitudinal salinity variations than local winds over the river. We demonstrate the importance of using proper boundary conditions to force the model relative to the minimal sensitivity of the model to parameter adjustment of horizontal mixing and uncertainty-based perturbation of wind and inflow forcings.     

Watershed factors affecting stream acidification in the White Mountains of New Hampshire,USA

The streams tributary to acidic Cone Pond, pH 4.5–4.8, and circumneutral Black Pond, pH 5.3–6.4, in the White Mountains of New Hampshire, USA, were monitored for a year. The watersheds of these two ponds were characterized in terms of geology and stream hydrology. Chemical gradients and patterns in rock weathering and groundwater discharge explain many of the differences in mineral content and acidity of the streams. The rocks of Black watershed produced an average of ten times the equivalent of basic cations as rocks from Cone watershed. This is on the same order as the difference in acidity of the two streams. Down-stream changes in stream chemistry follow differing patterns, but reflect the same principle of residence time and water path length controlling chemical evolution of streamwater. Watershed and aquatic managers may use these parameters in an inexpensive and simple assessment of the susceptibility of individual streams and ponds to acidification. A method is recommended to determine quickly the potential influence of bedrock type to aquatic chemistry.     

Metals recycling in the United States

Twenty-two metals for which secondary recovery is important, in terms of quantity and/or value, were compared and ranked for rate and efficiency of recycling, and availability of recycled metal. In general, their recycling rates trended upward over the period 1970–1993. Iron, aluminum, copper, gold, platinum, and lead accounted for most of the value of all secondary metal produced, while iron and steel dominated in terms of quantity produced and exported. The factors most influential on recycling rates are profitability, public support, organization of infrastructure, sortability, legislative support, and scrap purity. The share of supply accounted for by secondary metals is expected to surpass that of primary metals sometime in the next decade.