Fractionation of heavy metals in liquefied chromated copper arsenate 9-treated wood sludge using a modified BCR-sequential extraction procedure

Chromated copper arsenate (CCA)-treated wood was liquefied with polyethylene glycol/glycerin and sulfuric acid. After liquefaction, most CCA metals (98% As, 92% Cr, and 83% Cu) were removed from liquefied CCA-treated wood by precipitation with calcium hydroxide. The original CCA-treated wood and liquefied CCA-treated wood sludge were fractionated by a modified Community Bureau of Reference (BCR) sequential extraction procedure. The purpose of the BCR-sequential extraction used in this study was to examine the availability of CCA metals in treated wood for reuse. Both As and Cr had a slightly higher concentration in the sludge sample than in original CCA-treated wood. The sequential extraction showed that As and Cr were principally existed in an oxidizable fraction (As, 67%; Cr, 88%) in original CCA-treated wood. Only 1% of both As and Cr were extracted by hot nitric acid with the last extraction step. The distribution of As and Cr changed markedly in liquefied CCA-treated wood sludge.The amount of As in the exchangeable/acid extractable fraction increased from 16% to 85% while the amount of Cr increased from 3% to 54%. Only about 3% of As was present in the oxidizable fraction. However, there was still about 34% of Cr in the same fraction. Based on these results from sequential extraction procedures, it can be concluded that the accessibilities of CCA metals increase markedly by the liquefaction–precipitation process.     

Arsenic speciation in arsenic-rich Brazilian soils from gold mining sites under anaerobic incubation

BACKGROUND: Arsenic speciation in environmental samples is essential for studying toxicity, mobility and bio-transformation of As in aquatic and terrestrial environments. Although the inorganic species As(III) and As(V) have been considered dominant in soils and sediments, organisms are able to metabolize inorganic forms of arsenic into organo-arsenic compounds. Arsenosugars and methylated As compounds can be found in terrestrial organisms, but they generally occur only as minor constituents. We investigated the dynamics of arsenic species under anaerobic conditions in soils surrounding gold mining areas from Minas Gerais State, Brazil to elucidate the arsenic biogeochemical cycle and water contamination mechanisms. METHODS: Surface soil samples were collected at those sites, namely Paracatu Formation, Banded Iron Formation and Riacho dos Machados Sequence, and incubated in CaCl2 2.5 mmol L(-1) suspensions under anaerobic conditions for 1, 28, 56 and 112 days. After that, suspensions were centrifuged and supernatants analyzed for soluble As species by IC-ICPMS and HPLC-ICPMS. RESULTS: Easily exchangeable As was mainly arsenite, except when reducible manganese was present. Arsenate was mainly responsible for the increase in soluble arsenic due to the reductive dissolution of either iron or manganese in samples from the Paracatu Formation and Riacho dos Machados Sequence. On the other hand, organic species of As dominated in samples from the Banded Iron Formation during anaerobic incubation. DISCUSSION: Results are contrary to the expectation that, in anaerobic environments, As release due to the reductive dissolution of Fe is followed by As(V) reduction to As(III). The occurrence of organo-arsenic species was also found to be significant to the dynamics of soluble arsenic, mainly in soils from the Banded Iron Formation (BIF), under our experimental conditions. CONCLUSIONS: In general, As(V) and organic As were the dominant species in solution, which is surprising under anaerobic conditions in terrestrial environments. The unexpected occurrence of organic species of As was attributed to enrollment of ternary organic complexes or living organisms such as algae or cyanobacteria. PERSPECTIVES: These findings are believed to be useful for remediation strategies in mine-affected regions, as the organic As species are in general considered to be less toxic than inorganic ones and even As(V) is considered less mobile and toxic than As(III).     

Applying a Large,Statewide Database to the Assessment,Stressor Diagnosis,and Restoration of Stream Fish Communities

In this report, predictions of the species that were expected to occur at stream sites were generated and probable stressors to fish species that were predicted to occur but were absent were diagnosed. Predictions were generated based on the hierarchical screening method of Smith and Powell (1971, Am. Mus. Novit. 2458, 1–30), using fish abundance in conjunction with 25 environmental variables at 895 sites. The sites were sampled throughout Maryland and represent the entire range of environmental quality from severely degraded to minimally degraded. Stressor variable values that exceeded tolerance thresholds for species that were expected to occur, but were absent, were considered to be probable stressors. This method was tested for efficacy in stream site assessments and stressor diagnosis using an independent data set. Sites that were classified as degraded according to the IBI and to non-biological criteria had fewer predicted species present compared to minimally influenced sites, indicating that the proportion of predicted species present accurately represents the biological integrity of a stream site. The nine stressors that were applied to the test data set accounted for species absences in 43.7% of degraded sites. Impervious land cover was the most common stressor identified. In addition to assessing stream biological integrity and identifying stressors to fish species, this approach also provides tolerance thresholds for predicted fish species that are useful endpoints necessary to plan effective restoration of fish species in Maryland.     

Teenage driver crash incidence and factors influencing crash injury by rurality

BackgroundPrevious research has identified teenage drivers as having an increased risk for motor-vehicle crash injury compared with older drivers, and rural roads as having increased crash severity compared with urban roads. Few studies have examined incidence and characteristics of teen driver-involved crashes on rural and urban roads.MethodsAll crashes involving a driver aged 10 through 18 were identified from the Iowa Department of Transportation crash data from 2002 through 2008. Rates of overall crashes and fatal or severe injury crashes were calculated for urban, suburban, rural, and remote rural areas. The distribution of driver and crash characteristics were compared between rural and urban crashes. Logistic regression was used to identify driver and crash characteristics associated with increased odds of fatal or severe injury among urban and rural crashes.ResultsFor younger teen drivers (age 10 through 15), overall crash rates were higher for more rural areas, although for older teen drivers (age 16 through 18) the overall crash rates were lower for rural areas. Rural teen crashes were nearly five times more likely to lead to a fatal or severe injury crash than urban teen crashes. Rural crashes were more likely to involve single vehicles, be late at night, involve a failure to yield the right-of-way and crossing the center divider.ConclusionsIntervention programs to increase safe teen driving in rural areas need to address specific risk factors associated with rural roadways.Impact on IndustryTeen crashes cause lost work time for teen workers as well as their parents. Industries such as safety, health care, and insurance have a vested interest in enhanced vehicle safety, and these efforts should address risks and injury differentials in urban and rural roadways.     

Validation of FLACS against experimental data sets from the model evaluation database for LNG vapor dispersion

The siting of facilities handling liquefied natural gas (LNG), whether for liquefaction, storage or regasification purposes, requires the hazards from potential releases to be evaluated. One of the consequences of an LNG release is the creation of a flammable vapor cloud, that may be pushed beyond the facility boundaries by the wind and thus present a hazard to the public. Therefore, numerical models are required to determine the footprint that may be covered by a flammable vapor cloud as a result of an LNG release. Several new models have been used in recent years for this type of simulations. This prompted the development of the “Model evaluation protocol for LNG vapor dispersion models” (MEP): a procedure aimed at evaluating quantitatively the ability of a model to accurately predict the dispersion of an LNG vapor cloud.This paper summarizes the MEP requirements and presents the results obtained from the application of the MEP to a computational fluid dynamics (CFD) model – FLACS. The entire set of 33 experiments included in the model validation database were simulated using FLACS. The simulation results are reported and compared with the experimental data. A set of statistical performance measures are calculated based on the FLACS simulation results and compared with the acceptability criteria established in the MEP. The results of the evaluation demonstrate that FLACS can be considered a suitable model to accurately simulate the dispersion of vapor from an LNG release.     

Can juvenile corals be surveyed effectively using digital photography?: implications for rapid assessment techniques

Seasonal variations in the concentrations of groundwater with respect to arsenic, lead, cadmium and aluminium has been studied in Dhemaji district of Assam, India. The water samples were collected from 20 different sites in both dry and wet seasons. The metals were analysed by using atomic absorption spectrometer, Perkin Elmer AAnalyst 200 model. The concentrations of aluminium, lead and cadmium in groundwater were found to be significantly elevated. High concentrations of all the metals were recorded in the dry season than in the wet season. Univariate statistics along with skewness, kurtosis and confidence limit have been calculated for both the seasons to test the distribution normality for each metal. Statistical analyses of the data reveal non-uniform distribution of the metals in the area. The metal contamination of groundwater in the district follows the trend Al > Pb > Cd > As in both the seasons.     

Role of soil sorption and microbial degradation on dissipation of mesotrione in plant-available soil water

Mesotrione is a carotenoid biosynthesis-inhibiting herbicide labeled for pre-emergence and postemergence weed control in corn production. Understanding the factors that influence the dissipation of mesotrione in soil and in the plant-available water (PAW) is important for the environmental fate assessment and optimal weed management practices. The present research investigated the role of soil properties and microbial activities on the interrelated sorption and degradation processes of mesotrione in four soils by direct measurements of PAW. We found that mesotrione bound to the soils time dependently, with approximately 14 d to reach equilibrium. The 24-h batch-slurry equilibrium experiments provided the sorption partition coefficient ranging from 0.26 to 3.53 L kg(-1), depending on soil organic carbon and pH. The dissipation of mesotrione in the soil-bound phase was primarily attributed to desorption to the PAW. Degradation in the PAW was rapid and primarily dependent on microbial actions, with half-degradation time (DT(50)) <3 d in all four soils tested. The rapid degradation in the PAW became rate limited by sorption as more available molecules were depleted in the soil pore water, resulting in a more slowed overall process for the total soil-water system (DT(50) <26 d). The dissipation of mesotrione in the PAW was due to microbial metabolism and time-dependent sorption to the soils. A coupled kinetics model calibrated with the data from the laboratory centrifugation technique provided an effective approach to investigate the interrelated processes of sorption and degradation in realistic soil moisture conditions.