Turbulence suppression by suspended sediment within a geophysical flow

Experiments are performed in a mixing box to evaluate the effect of suspended sediment on turbulence generated by an oscillating grid. Quartz-density sand of varying sizes and concentrations is used, and particle image velocimetry is employed to quantify only the fluid phase. Results show that (1) while a relatively large secondary flow field is present in the box, turbulence is a maximum near the grid and it decreases systematically toward the water surface; (2) relatively high concentrations of fine sediment can markedly alter this secondary flow field and significantly decrease both the time-mean and turbulent kinetic energy within the flow, yet these same sediment concentrations have little effect on the integral time and length scales derived for each velocity component; and (3) the overall turbulence suppression observed can be related to the transfer of energy from the fluid to the sediment and the maintenance of a suspended sediment load rather than commonly employed turbulence modulation criteria. These experimental data demonstrate unequivocally that the presence of a suspended sediment load can significantly reduce overall turbulent kinetic energy, and these results should be applicable to a range of sediment-laden geophysical flows.     

Processes of distribution of pharmaceuticals in surface freshwaters: implications for risk assessment

The global consumption and production of pharmaceuticals is increasing concomitantly with concern regarding their environmental fate and effects. Active pharmaceutical ingredients are mainly released into the aquatic environment through wastewater effluent discharge. Once in the environment, pharmaceuticals can undergo processes of natural attenuation, i.e. dilution, sorption, transformation, depending on physico-chemical properties of the compound, such as water solubility, lipophilicity, vapour pressure, and environmental conditions, such as pH, temperature and ionic strength. A major natural attenuation process is the sorption on dissolved organic matter, colloids, suspended solids and sediments, which in turn control pharmaceuticals distribution, residence time and persistence in aquatic systems. Here we review studies of sorption capacity of natural sorbents to pharmaceuticals. These report on the importance of several environmental and sorbent-specific properties, such as the composition, quality, and amount of the sorbent, and the environmental pH, which determines the speciation of both the sorbent and compound. The importance of accounting for distribution processes on freshwater sorbents for any determination of environmental concentrations of pharmaceuticals is apparent, while the reliability of surrogate standards for measuring dissolved organic matter (DOM) distribution is evaluated in the context of the need for robust environmental risk assessment protocols.     

Analyzing Spatio-temporal Land Cover Dynamics in an Atlantic Forest Portion Using Unsupervised Change Detection Techniques

Environmental Modeling & Assessment - Over the past decades, the Southeast Atlantic Forest in Paraíba do Sul River Valley has suffered intense deforestation and human disturbances. Due to...     

WATER RESERVOIR SYSTEMS1

. Water Reservoir Systems were investigated for urban areas as an alternative or complement to storm water drainage systems for flood control which could provide benefits in water conservation and reduce drainage system costs. The study consisted of: (1) gathering of engineering data on the topographical, hydrological, and precipitation characteristics of the area and urban development and economic statistics     

The effect of opening windows on air change rates in two homes

More than 300 air change rate experiments were completed in two occupied residences: a two-story detached house in Redwood City, CA, and a three-story townhouse in Reston, VA. A continuous monitor was used to measure the decay of SF6 tracer gas over periods of 1-18 hr. Each experiment first included a measurement of the air change rate with all exterior doors and windows closed (State 0), then a measurement with the single change from State 0 conditions of opening one or more windows. The overall average State 0 air change rate was 0.37 air changes per hour (hr(-1)) (SD = 0.10 hr(-1); n = 112) for the California house and 0.41 hr(-1) (SD = 0.19 hr(-1); n = 203) for the Virginia house. Indoor/outdoor temperature differences appeared to be responsible for the variation at the Virginia house of 0.15-0.85 hr(-1) when windows were closed. Opening a single window increased the State 0 air change rate by an amount roughly proportional to the width of the opening, reaching increments as high as 0.80 hr(-1) in the California house and 1.3 hr(-1) in the Virginia house. Multiple window openings increased the air change rate by amounts ranging from 0.10 to 2.8 hr(-1) in the California house and from 0.49 to 1.7 hr(-1) in the Virginia house. Compared with temperature differences and wind effects, opening windows produced the greatest increase in the air change rates measured in both homes. Results of this study indicate the importance of occupant window-opening behavior on a home's air change rate and the consequent need to incorporate this factor when estimating human exposure to indoor air pollutants.     

Safety with access scaffolds: development of a prototype decision aid based on accident analysis

PROBLEM: Accidents involving temporary access systems, particularly temporary scaffolds, account for a large proportion of injuries in the construction industry worldwide. METHOD: This paper outlines the development of a prototype decision aid (SCAFPASS, an abbreviation for Scaffold Planning Aid for System Safety) to promote access scaffold safety. It was guided by an examination of the root-causes and management deficiencies apparent in: (a) paper-based files of 186 access-related incidents held by the Health and Safety Executive (HSE) in the UK; and (b) computer-based files of 2,910 incidents appearing in the HSE database between 1997 to 2000. RESULTS: The more frequent root-causes included the fitting of defective components, unauthorized modification of the structure, omission of barriers, and errors resulting in simple, readily detectable structural faults. Common managerial deficiencies included failure to control risk, unsafe methods and procedures, and inadequate training and supervision. IMPACT ON INDUSTRY: SCAFPASS aims to avoid these root-causes by improving safety management from the outset and throughout all phases of a project.     

MISSOURI RIVER FLOOD OF 1993: ROLE OF WOODY CORRIDOR WIDTH IN LEVEE PROTECTION1

ABSTRACT. We investigated the relationships between levee damage and woody corridor along a 353‐mile segment of the Missouri River in Missouri during the flood of 1993. Results indicated that woody corridors between riverbanks and primary levees played a significant role in the reduction or prevention of flood related damage to levees. Forty‐one percent of levee failures in this segment occurred in areas with no woody corridor, while 74 percent and 83 percent of failures occurred where woody corridor widths were less than 300 feet and less than 500 feet, respectively. Median failure lengths with a woody corridor present were 50.3 percent shorter than median failure lengths with no woody corridor present. Levees without failures had significantly wider median woody corridor widths than levees that failed. Eligibility for the Corps of Engineers levee maintenance program was not a significant factor in the reduction of levee damage. Discontinuities in woody corridors played a role in 27.5 percent of the levee failures in the study segment. Smaller segments of the river valley were studied to determine if geomorphic differences influenced variations in the protective value of woody corridors.     

The progress of English and Welsh local authorities in addressing climate change

This paper describes the progress that local authorities in England and Wales are making in adapting to the threat of climate change and taking action to reduce greenhouse gas emissions. The responses from surveys of local authorities in England and Wales carried out in 2000 (IDeA, Reducing Greenhouse Gas Emissions: survey of activities and initiatives by local authorities. (Questionnaire and results) Improvement and Development Agency, 2000) and 2002 (Allman et al., Climate Change: a survey of local authorities, Local Government Association, 2002) were compared. Progress in implementing the International Council for Local Environmental Initiatives (ICLEI) five-step methodology (ICLEI, Local Government Implementation of Climate Protection—report to the United Nations, International Council for Local Environmental Initiatives, 1997) was used to identify the 'successful' local authorities. The barriers faced by these authorities were then compared with those faced by the remaining local authorities.

Most local authorities are not making substantial progress. However, a small number have successfully prepared greenhouse gas emissions inventories, developed strategies and implemented adaptation and greenhouse gas reduction measures. These successful authorities have made progress despite the fact that addressing climate change is not a legal requirement.

Their success is due to three key factors. Firstly, they have recognised the secondary benefits of tackling climate change, e.g. potential employment, improved quality of life and reduction in fuel poverty. Secondly, they have the strong political, professional and technical support necessary to champion climate change activities. Finally, they have worked in partnership with utilities, private, public and voluntary groups to raise the finance needed to implement measures both to adapt to climate change and to reduce greenhouse gas emissions.