PET from Used Beverage Bottles: A Material for Preparation of Biologically Degradable Copolyesters

Poly(ethylene terephthalate) from used colorless beverage bottles was solvolyzed by ethane-1,2-diol. Hydroxyl end-groups present in the mixture of polyols formed were used to initiate the polymerization of ??-caprolactone (CLO) at 190?°C. Polycondensation (190?°C) of the reaction mixture containing an equilibrium amount of lactone corresponding to the reaction temperature yield an aliphatic?Caromatic copolyester. A variety of copolyesters containing 20?C60?mol. % CLO structural units was prepared. The microstructure of their macromolecules was analyzed using ¹H?NMR spectroscopy. Copolyesters were characterized by thermal analysis and tensile tests and their biodegradation potential was checked by the composting test.     

Synthesis of Polylactide-b-Poly (Dimethyl Siloxane) Block Copolymers and Their Blends with Pure Polylactide

The synthesis of polylactide (PLA)-b-poly (dimethyl siloxane) (PDMS) linear block copolymers and their use in blends with pure-PLA are described. PLA-b-PDMS linear block copolymers were obtained by the transesterification reaction in chloroform solution between poly(dimethyl siloxane) bis (2-aminopropyl ether) (molecular weight 2,000?Da) with PLA in the presence of stannous octoate. Molecular weights (Mw) of the block copolymers were varied from 53,800 to 63,600?Da while that of pristine PLA was 73,600?Da. The copolymers obtained were purified by fractional precipitation and then characterized by ¹H NMR, FTIR, GPC, viscometry and DSC techniques. Blends of pure PLA with PLA-b-PDMS block copolymers displayed improved elastic properties (elongation up to 140%) compared to pure PLA (elongation ~9%). Thermal, mechanical and morphological characterization of the blends were also conducted.     

Effect of aeration rate and moisture content on the emissions of selected VOCs during municipal solid waste composting

The influence of the industrial control composting conditions (aeration 0.005–0.300?L_air?kg^?1 and moisture 40–70?%) of municipal solid waste on the composition of the selected compound emitted (limonene, β-pinene, 2-butanone, undecane, phenol, toluene, dimethyl sulfide, dimethyl disulfide) was studied. The highest emissions of volatile organic compounds (VOCs) were observed in the early stages of the processes. At the end of the process, low concentrations of the emitted compounds were found. Aeration rate had a strong effect on emissions. High aeration rate (0.300?L_air?kg^?1?min^?1) caused normally high emissions of all selected compounds whereas low aeration rates (0.05?L_air?kg^?1?min^?1) could cause anaerobiosis problems and generation of organic sulphur compounds. We observed that the effect of the moisture upon the emitted concentrations varied depending on the studied compound.     

Role of the vitamin E model compound Trolox in the prevention of Cr(VI)-induced cellular damage

Given the wide industrial use of chromium (Cr) and its environmental contamination, chromium represents a risk to humans exposed to the metal. Considering that Cr(VI) is a potent oxidizing agent that increases intracellular oxidation and DNA damage, it would be worth considering the pretreatment of cells with antioxidants as a means of preventing Cr(VI)-induced toxicity. The objective of this study was to pretreat yeast cells with the water-soluble vitamin E analogue Trolox in an effort to increase cell tolerance against reactive chromium and reactive oxygen species formed during Cr(VI) reduction. Results revealed a decrease in Cr(VI)-induced cytotoxicity and mitotic gene conversions in Trolox-pretreated cells. The protective effect of Trolox in Cr(VI) induced genotoxicity was confirmed also with the prokaryotic Salmonella typhimurium SOS/umu test. Pretreatment of cells with Trolox (1) increased total Cr bioaccumulation, (2) decreased Cr(VI)-induced intracellular oxidation, (3) decreased Cr(V) persistence and (4) increased OH^? formation in yeast extracts. These findings might be useful in directing future investigations concerning the use of Trolox as a human antioxidant supplement, and in clinical applications related to Cr-induced genotoxicity in occupational and environmental situations where chromium is a problem.     

Photosynthetic sulfur bacteria from Zimapan Reservoir (Mexico): Seasonal variations and toxic effects of zinc in a microcosm system

Photosynthetic sulfur bacteria oxidize the sulfide produced by dissimilatory sulfate-reducing bacteria, thus preventing the occurrence of pollution by these compounds in the oxygenic zone of aquatic systems. Zinc is one of the most abundant heavy metals. Its toxic effects have been documented in various organisms that can photosynthesize, but a lack of information prevails in this respect, about photosynthetic sulfur bacteria. The aim of the present study was to evaluate the toxic effects of zinc on green sulfur bacteria (Chlorobiaceae) and purple sulfur bacteria (Chromatiaceae) in a microcosm as well to explore the possible relationships between the bacterial population growths with the physicochemical properties of the metalimnion of Zimapan Reservoir (Mexico) during a 1-year period. Hydrosoluble organic carbon (HOC) and light availability in the metalimnion were the limiting factors for growth in these bacteria. Higher HOC levels occurred in Spring, at the end of the wet season and in Winter. Current zinc levels in the reservoir seem to elicit toxic effects. At lethal zinc concentrations, the best concentration-response relationship was shown. The biomarker for purple sulfur bacteria was the bacteriochlorophyll content, while total reducing sugar was the best biomarker for green sulfur bacteria. At sublethal concentrations, zinc alters adenosine triphosphate levels, total reducing sugar, total protein content, and bacteriochlorophyll content. The observed responses indicate that green sulfur bacteria are more sensitive than purple sulfur bacteria and are suitable target organisms for use in establishing the accepted threshold concentration of zinc (NOEC 0.056–0.097 mg L^?1 of Zn) in anoxic deep water.     

Levels of plasma B-esterases and glutathione-S-transferase activities in three South American toad species

We determined the normal levels of butyrylcholinesterase (BChE), carboxylesterase (CbE), and glutathione S-transferases (GST) activities in three South American toad species in order to establish reference values for field pesticide monitoring purposes. Interspecies variations in B-esterase and GST activities were examined according to body mass. In addition, comparative inhibition of BChE and CbE activities using malaoxon, and chemical reactivation of malaoxon-inhibited BChE activity using pyridine-2-aldoxime methochloride (2-PAM) were investigated. Bufo fernandezae had average activity values for BChE: 17.31 mmol min^?1 ml^?1; CbE: 621.49 nmol min^?1 ml^?1 and GST: 1.94 mmol min^?1 ml^?1 while B. arenarum enzymatic average activities were BChE: 9.51 mmol min^?1 ml^?1; CbE: 270.07 nmol min^?1 ml^?1, and GST: 1.59 mmol min^?1 ml^?1; finally Bufo schneideri had enzymatic mean values of BChE: 2.08 mmol min^?1 ml^?1; CbE: 301.95 nmol min^?1 ml^?1, and GST: 1.60 mmol min^?1 ml^?1. Moreover, we found an allometric relationship between plasma BChE and CbE activities and body size for the three toad species. We suggest that B. fernandezae would be the species with a higher tolerance capacity to organophosphorous insecticides compared to the other toad species, while B. schneideri may be the most vulnerable toad species to field pesticide exposure, although some other factors (e.g., brain AChE sensitivity or pesticide metabolism by phosphotriesterases) should be also taken into account. The malaoxon-inhibited BChE activity of the three toad species was reactivated in the presence of 2-PAM, and it is recommended as a specific and sensitive methodology in the assessment of field exposure to OP insecticides together to compare BChE activity levels between OP-exposed and nonexposed individuals.     

Automated indirect fluoride determination by ICP-OES using discontinuous-flow analysis

An automated method for the indirect determination of fluoride by inductively coupled plasma atomic emission spectrometry using discontinuous-flow analysis has been developed. A modified flow injection analysis system was used for sample preparation. The method is based on the determination of excess cerium(III) ion after precipitation of CeF₃. Separation of the precipitate is performed online on a syringe membrane filter that is cleaned each analysis cycle by 1 M nitric acid, ensuring a long life-time for the filter. As a result of the short reaction time, a detection limit of 9.5 mg L^?1 was obtained. The precision (RSD) of the proposed method is 1.02% at fluoride concentration of 28 mg L^?1. The applicability of the technique for groundwater monitoring of fluoride-contaminated area is demonstrated.     

Cadmium accumulation by green algae Cladophora glomerata (L.) Kutz. (Chlorophyta) in presence of Nile tilapia Oreochromis niloticus (L.)

Accumulation of metals by aquatic organisms is mostly affected by other biological components in environments. In this study, cadmium (Cd) accumulation in green algae, Cladophora glomerata (L.) Kutz., exposed to 0.1 and 1.0 mg L^?1 of Cd for 15 and 30 days was examined in laboratory conditions in the presence of Nile tilapia Oreochromis niloticus (L.). The green algae C. glomerata accumulated Cd concentrations as 690 ± 70 and 3430 ± 470 mg kg^?1 on day 15, and 1130 ± 180 and 6830 ± 1540 mg kg^?1 on day 30. There were significant increases (p < 0.05) in metal accumulation by green algae as the exposure time and metal concentration increased. The results also indicated that the presence of Nile tilapia in the medium led to a significant Cd accumulation in the green algae compared to control (p < 0.05).     

Presence of metals in drinking water distribution networks due to pipe material leaching: a review

Drinking water quality should remain constant from the drinking water treatment plant to the consumer's tap. However, water quality characteristics might be affected by interactions with pipe materials. This review describes the iron, copper, lead, zinc, aluminum, chromium, and cadmium in drinking water leached from the pipe material present in drinking water, as well as the factors and mechanisms that affect leaching processes. Data analysis suggests that monitoring the water quality in distribution systems is important for their proper management; however, the low measured concentrations highlight the need for sensitive sensors. In addition, further research is necessary to anticipate possible future effects before the installation of new materials/infrastructure or changes in water source/treatment.     

Rainwater composition as a function of the cloud type

The influence of the type of clouds that produce precipitation in the rainwater composition was analyzed. Logroño, a remote station in the North of Spain was chosen for the analyses. Results prove that the rainwater composition from Cumulonimbus is different to the composition of the rainwater from the other clouds. In addition, the source of NO₃ ^? and SO₄ ^2? is studied in the different types of clouds. It is shown that the source is the soil except Stratocumulus formed from Cumulus in which the source is the gas‐particle conversion.