Organochlorine pesticide residues in drinking water in the rural areas of Haryana,India

Drinking water samples collected from rural areas of three districts of Haryana during pre-monsoon and post-monsoon periods were analysed for the presence of organochlorine pesticide residues. The main source of drinking water in rural areas, i.e. groundwater in Ambala and Gurgaon districts and surface water supply in Hisar district, was found to be contaminated with isomers of HCH and endosulfan and metabolites of DDT, whereas dieldrin remained below detection limits. During the study period, the mean values observed for total HCH, DDT and endosulfan were 87.6, 848.2, and 27.4 ng/L and 99.8, 275.3 and 164.2 ng/L, respectively, for Ambala and Gurgaon districts. In the case of Hisar district, the values were 78.5, 115.9, and 53.0 ng/L, respectively. During the study period, 37% of the samples exceeded the total pesticide level of 500 ng/L indicated in the EECD directive for drinking water. Seasonal variations of pesticide residues were also observed during the study period.     

Artificial Groundwater Recharge Zones Mapping Using Remote Sensing and GIS: A Case Study in Indian Punjab

Artificial groundwater recharge plays a vital role in sustainable management of groundwater resources. The present study was carried out to identify the artificial groundwater recharge zones in Bist Doab basin of Indian Punjab using remote sensing and geographical information system (GIS) for augmenting groundwater resources. The study area has been facing severe water scarcity due to intensive agriculture for the past few years. The thematic layers considered in the present study are: geomorphology (2004), geology (2004), land use/land cover (2008), drainage density, slope, soil texture (2000), aquifer transmissivity, and specific yield. Different themes and related features were assigned proper weights based on their relative contribution to groundwater recharge. Normalized weights were computed using the Saaty’s analytic hierarchy process. Thematic layers were integrated in ArcGIS for delineation of artificial groundwater recharge zones. The recharge map thus obtained was divided into four zones (poor, moderate, good, and very good) based on their influence to groundwater recharge. Results indicate that 15, 18, 37, and 30 % of the study area falls under “poor,” “moderate,” “good,” and “very good” groundwater recharge zones, respectively. The highest recharge potential area is located towards western and parts of middle region because of high infiltration rates caused due to the distribution of flood plains, alluvial plain, and agricultural land. The least effective recharge potential is in the eastern and middle parts of the study area due to low infiltration rate. The results of the study can be used to formulate an efficient groundwater management plan for sustainable utilization of limited groundwater resources.     

Use of 2–methoxyethyl ether and nitromethane as oxygenated additives for performance improvement and emission reduction of CI engine: experimental investigation and numerical simulation

Environmental Science and Pollution Research - Diesel engines are playing a vital responsibility in the field of automobile, agriculture, construction, and power generation. In the present world,...     

Sustainable technologies for on-site domestic wastewater treatment: a review with technical approach

Environment, Development and Sustainability - The rapid population growth has rendered the centralized sewerage systems a non-realistic option in sparsely populated areas, particularly in...     

Climate change effect on soil carbon stock in different land use types in eastern Rajasthan,India

Environment, Development and Sustainability - Global change in climate might have potential effect on both SOC stock and carbon sequestration capacity in soil. Predicting soil carbon stock in...     

Spectrophotometric determination of indiumin zinc effluent

A new extraction-spectrophotometric method for the determination of indium at ppb level in zinc effluent is described. It is based on quantitative extraction (51.2–99.2%) of the tetrabromoindate complex with toluene solution of N,N-diphenylbenzamidine and its nine analogous from sulphuric acid solutions, which allowed the extract to react with basic dye (i.e. brilliant green, malachite green, crystal violet) solution in sequence. Among the basic dyes tested, brilliant green gave the most sensitive colour reaction. The value of molar absorptivity of the amidine bromoindate extracts with brilliant green lie in the range of (0.53–1.03)×10⁵ l mole^-1 cm^-1 at absorption maximum, 630–640. With the most sensitive compound, N-(2-methyl-phenyl)-N-phenylbenzamidine(APPBA), the detection limit of the method is 13 ppb. The method is free from interferences of almost all ions associated with indium. The method has been applied for the determination of indium to zinc-effluent.     

Gamma irradiation of municipal sludge for safe disposal and agricultural use.

Gamma radiation was found to be an effective tool for hygienization of municipal wastewater sludge. The sludge received from the primary settling tank of a municipal wastewater treatment plant was gamma irradiated using a cobalt-60 source in a sludge hygienization research irradiator. The process parameters were adjusted to effectively eliminate coliform bacteria in the sludge and to prevent their regrowth. Irradiated sludge was found to be free of fecal coliform and could be directly disposed after drying in a landfill or used as manure. It could also be used as a medium for growth of Rhizobium sp for obtaining a bio-fertilizer.     

Indian aerosols: present status

This article presents the status of aerosols in India based on the research activities undertaken during last few decades in this region. Programs, like International Geophysical Year (IGY), Monsoon Experiment (MONEX), Indian Middle Atmospheric Program (IMAP) and recently conducted Indian Ocean Experiment (INDOEX), have thrown new lights on the role of aerosols in global change. INDOEX has proved that the effects of aerosols are no longer confined to the local levels but extend at regional as well as global scales due to occurrence of long range transportation of aerosols from source regions along with wind trajectories. The loading of aerosols in the atmosphere is on rising due to energy intensive activities for developmental processes and other anthropogenic activities. One of the significant observation of INDOEX is the presence of high concentrations of carbonaceous aerosols in the near persistent winter time haze layer over tropical Indian Ocean which have probably been emitted from the burning of fossil-fuels and biofuels in the source region. These have significant bearing on the radiative forcing in the region and, therefore, have potential to alter monsoon and hydrological cycles. In general, the SPM concentrations have been found to be on higher sides in ambient atmosphere in many Indian cities but the NOx concentrations have been found to be on lower side. Even in the haze layer over Indian Ocean and surrounding areas, the NOx concentrations have been reported to be low which is not conducive of O3 formation in the haze/smog layer. The acid rain problem does not seem to exist at the moment in India because of the presence of neutralizing soil dust in the atmosphere. But the high particulate concentrations in most of the cities' atmosphere in India are of concern as it can cause deteriorated health conditions.     

Fate and bioavailability of arsenic in organo-arsenical pesticide-applied soils. Part-I: incubation study

A laboratory incubation study was conducted to estimate geochemical speciation and in vitro bioavailability of arsenic as a function of soil properties. Two chemically-variant soil types were chosen, based on their potential differences with respect to arsenic reactivity: an acid sand with minimal arsenic retention capacity and a sandy loam with relatively high concentration of amorphous Fe/Al-oxides, considered a sink for arsenic. The soils were amended with dimethylarsenic acid (DMA) at three rates: 45, 225, and 450 mg/kg. A sequential extraction scheme was employed to identify the geochemical forms of arsenic in soils, which were correlated with the "in vitro" bioavailable fractions of arsenic to identify the most bioavailable species. Arsenic bioavailability and speciation studies were done at 0 time (immediately after spiking the soils with pesticide) and after four-months incubation. Results show that soil properties greatly impact geochemical speciation and bioavailability of DMA; soils with high concentrations of amorphous Fe/Al oxides retain more arsenic, thereby rendering them less bioavailable. Results also indicate that the use of organic arsenicals as pesticides in mineral soils may not be a safe practice from the viewpoint of human health risk.     

Biochemical responses of Camellia sinensis (L.) O. Kuntze to heavy metal stress

Three heavy metals-mercury (II), copper (II) and nickel (II), each at a concentration of 10 and 100 micrograms/ml, were tested for their effects on various biochemical constituents of tea leaves. Both NI (II) and Hg (II) decreased the phenolic contents, while Cu (II) increased it to some extent. The metal treatments enhanced the activity of phenyl alanine ammonia lyase (PAL), while the activity of poly phenol oxidase (PPO) showed a decline. Heavy metal stress also decreased the chlorophyll content of the leaves, along with a significant reduction in Hill activity. Proline content increased significantly in all treatments.