Comparison of metabolic nitramine degradation by denitrifying species

The biodegradation of two popular nitramine energetics were investigated. The HMX (octa‐hydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine) was mineralized by anaerobic mixed denitrifiers in digested sewage sludge culture. An initial HMX concentration of 120 mg/L decreased to a non‐detectable level (> 99% removal efficiency) in 8 days of incubation under strict anaerobic conditions. It was, however, not effectively metabolized by single denitrifying species, P. aeruginosa, B. subtilis in a nitrogen limiting condition under their optimum growth conditions. The other nitramine energetic, ADN (ammonium dinitramide), was mineralized well in the anaerobic mixed culture. The initial ADN concentration of 250 mg/L was reduced to non‐detectable levels (> 99% removal efficiency) in 5 days of incubation under anaerobic conditions. These results show that the anaerobic mixed culture, compared to the pure monoculture, is superior in the degradation of nitramine energetics.     

Degradation of ammonium dinitramide (ADN) in digested sewage sludge under strict anaerobic conditions

The biodegradation of one popular nitramine energetics, ammonium dinitramide (ADN) by mixture of denitrifying bacterial species was investigated. ADN was observed to be effectively mineralized in the anaerobic mixed culture. The initial ADN concentration of 250 mg/L was reduced to non‐detectable levels (> 99% removal efficiency) in 5 days of incubation under anaerobic conditions. Final products generated from anaerobic degradation of nitramine energetics by anaerobic metabolism were NH₄ ⁺, CH₄, and CO₂ that were released to the environment with the denitrifiers’ growth. In addition, it was found that the activity of denitrifiers was inhibited by high concentration of ammonia generated through the degradation reactions of energetic nitrites.     

The use of ion exchange membranes for isotope analyses on soil water sulfate: laboratory experiments

To investigate the potential use of anion exchange membranes (plant root simulator [PRS] probes) for isotope investigations of the soil sulfur cycle, laboratory experiments were performed to examine the sulfate exchange characteristics and to determine the extent of sulfur and oxygen isotope fractionation during sulfate sorption and desorption on the probes in aqueous solutions and simulated soil solutions. The sulfate-exchange tests in aqueous solutions under varying experimental conditions indicated that the amount of sulfate exchanged onto PRS probes increased with increasing reaction time, initial sulfate concentration, and the number of probes used (= surface area), whereas the percentage of removal of available sulfate was constant irrespective of the initial sulfate concentration. The competition of nitrate and chloride in the solution lowered the amount of exchanged sulfate. The exchange experiments in a simulated soil under water-saturated and water-unsaturated conditions showed that a considerable proportion of the soil sulfate was exchanged by the PRS probes after about 10 d. There was no evidence for significant sulfur and oxygen isotope fractionation between soil sulfate and sulfate recovered from the PRS probes. Therefore, we recommend the use of PRS probes as an efficient and easy way to collect soil water sulfate for determination of its isotope composition.     

Determination of soil contamination sources in mining area using Zn/Cd ratios with mobile Cd

Environmental Geochemistry and Health - Paddy fields near metalliferous mining area are sometimes contaminated by tailings or mine water. In the contaminated paddy fields around the abandoned...     

Pilot-scale tests to optimize the treatment of net-alkaline mine drainage

A pilot-scale plant consisting of an oxidation basin (OB), a neutralization basin (NB), a reaction basin (RB), and a settling basin (SB) was designed and built to conduct pilot-scale experiments. With this system, the effects of aeration and pH on ferrous oxidation and on precipitation of the oxidized products were studied systemically. The results of pilot-scale tests showed that aeration at 300 L/min was optimum for oxidation of Fe(II) in the OB, and the efficiency of oxidation of Fe(II) increased linearly with increasing retention time. However, Fe(II) was still present in the subsequent basins-NB, RB, and SB. Results from pilot-scale tests in which neutralization was excluded were used to obtain rate constants for heterogeneous and homogeneous oxidation. Oxidation of Fe(II) reached almost 100% when the pH of the mine drainage was increased to more than 7.5, and there was a linear relationship between total rate constant, log (K(total)), and pH. Absorbance changes for samples from the NB under different pH conditions were measured to determine the precipitation properties of suspended solids in the SB. Because ferrous remained in the inflow to the SB, oxidation of Fe(II) was dominant initially, resulting in increased absorbance, and the rate of precipitation was slow. However, the absorbance of the suspension in the SB rapidly dropped when pH was higher than 7.5.     

Pilot-scale tests to optimize the treatment of net-alkaline mine drainage

A pilot-scale plant consisting of an oxidation basin (OB), a neutralization basin (NB), a reaction basin (RB), and a settling basin (SB) was designed and built to conduct pilot-scale experiments. With this system, the effects of aeration and pH on ferrous oxidation and on precipitation of the oxidized products were studied systemically. The results of pilot-scale tests showed that aeration at 300 L/min was optimum for oxidation of Fe(II) in the OB, and the efficiency of oxidation of Fe(II) increased linearly with increasing retention time. However, Fe(II) was still present in the subsequent basins—NB, RB, and SB. Results from pilot-scale tests in which neutralization was excluded were used to obtain rate constants for heterogeneous and homogeneous oxidation. Oxidation of Fe(II) reached almost 100% when the pH of the mine drainage was increased to more than 7.5, and there was a linear relationship between total rate constant, log (K _total), and pH. Absorbance changes for samples from the NB under different pH conditions were measured to determine the precipitation properties of suspended solids in the SB. Because ferrous remained in the inflow to the SB, oxidation of Fe(II) was dominant initially, resulting in increased absorbance, and the rate of precipitation was slow. However, the absorbance of the suspension in the SB rapidly dropped when pH was higher than 7.5.     

The Relationships Between Biomechanical and Postural Stresses,Musculoskeletal Injury Rates,and Perceived Body Discomfort Experienced by Industrial Workers: A Field Study

A combination of archival, subjective, and observational field data collection methods were used to investigate the relationship between biomechanical and postural stresses, and the resulting physical strain experienced by industrial workers of a packaging plant. Assessment of physical strain was based on the number and incidence rate of Occupational Safety and Health Administration (OSHA)-reportable injuries that were recorded over a period of 27 months, and based on the self-reported ratings of perceived body discomfort. Both the biomechanical and postural stresses correlated with the musculoskeletal injury rate. The results illustrate the usefulness of postural and biomechanical analyses for assessing the risk of injury in industry.     

Nonparametric Monte Carlo Simulation for Flood Frequency Curve Derivation: An Application to a Korean Watershed1

Abstract: A mix of causative mechanisms may be responsible for flood at a site. Floods may be caused because of extreme rainfall or rain on other rainfall events. The statistical attributes of these events differ according to the watershed characteristics and the causes. Traditional methods of flood frequency analysis are only adequate for specific situations. Also, to address the uncertainty of flood frequency estimates for hydraulic structures, a series of probabilistic analyses of rainfall‐runoff and flow routing models, and their associated inputs, are used. This is a complex problem in that the probability distributions of multiple independent and derived random variables need to be estimated to evaluate the probability of floods. Therefore, the objectives of this study were to develop a flood frequency curve derivation method driven by multiple random variables and to develop a tool that can consider the uncertainties of design floods. This study focuses on developing a flood frequency curve based on nonparametric statistical methods for the estimation of probabilities of rare floods that are more appropriate in Korea. To derive the frequency curve, rainfall generation using the nonparametric kernel density estimation approach is proposed. Many flood events are simulated by nonparametric Monte Carlo simulations coupled with the center Latin hypercube sampling method to estimate the associated uncertainty. This study applies the methods described to a Korean watershed. The results provide higher physical appropriateness and reasonable estimates of design flood.     

Formation and emission status of PCDDs/PCDFs in municipal solid waste incinerators in Korea

This study was carried out to examine the formation and the emission status of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDDs/PCDFs) in the flue gases of commercial-scale municipal solid waste (MSW) incinerators, and thus to provide the engineering data for the reduction of PCDDs/PCDFs emitted from MSW incinerators. The formation concentrations of the PCDDs/PCDFs generated at the outlet of waste heat boilers (WHB) were in the range of 1.18-29.61 ng-TEQ/N m3 (average 5.75 ng-TEQ/N m3), while the emission concentrations at the stacks were in the range of 0.026-4.548 ng-TEQ/N m3 (average 0.924 ng-TEQ/N m3). Two major 2,3,7,8-substituted congeners were 2,3,4,7,8-PeCDF and 2,3,4,6,7,8-HxCDF, and their concentrations were up to 50% and 64% of total TEQ values at the outlet of WHB and the stack, respectively. From the results of multi-regression analysis, the formation concentration of PCDDs/PCDFs could be predicted as follows with the correlation factor of r2 = 0.962: PCDDs/PCDFs (ng-TEQ/N m3) = 3.036 (Cl) + 0.094 (T1) - 0.472 (Combustibles) + 0.059 (CO) - 0.039 (THC) - 3.366 (H) + 22.157, where T1 (degrees C) is the temperature at the outlet of the WHB. Cl, Combustibles and H are given as percentages and the others are in parts per million.     

Antecedents and consequences of satisfaction with work–family balance: A moderating role of perceived insider status

This study developed a moderated mediation model to investigate how family‐supportive paid leave and supervision affect employees' satisfaction with work–family balance and in turn their affective organizational commitment and supervisor‐directed organizational citizenship behavior depending on their perceived insider status in the organization. Our analysis of data collected from 118 employee–supervisor dyads in Korean organizations revealed that satisfaction with work–family balance mediated the linkages from family‐supportive supervision to affective organizational commitment and supervisor‐directed organizational citizenship behavior, and the linkage from family‐supportive paid leave to affective organizational commitment. Results further showed that the entire mediational process for family‐supportive supervision was more pronounced for those who perceived themselves to be an insider of their organizations, while the same pattern was not found for the meditational process related to family‐supportive paid leave. Our findings provide theoretical implications for work–family balance research and offer practical suggestions to make employees satisfied with work–family balance.