Influence of drying and calcination temperatures for Ce-Cu-Al trimetallic composite catalyst on simultaneous removal H2S and PH3: Experimental and DFT studies

This work explored the influences of the drying and calcination temperatures on a Ce-Cu-Al trimetallic composite catalyst for the simultaneous removal of H₂S and PH₃. The effects of both temperatures on the structural features and activity were examined. The density functional theory method was used to calculate adsorption energies and further analyze their adsorption behavior on different slabs. Experiments revealed suitable drying and calcination temperatures to be 60 and 500°C, respectively. The capacity reached 323.8 and 288.1 mg/g. Adjusting drying temperature to 60°C is more inclined to form larger and structured grains of CuO. Rising calcinating temperature to 500°C could increase the grain size and redox capacity of CuO to promote performance. Higher temperatures would destroy the surface structure and lead to a crystal phase transformation, which was that the CuO and Al₂O₃ were gradually recombined into CuAl₂O₄ with a spinel structure. The exposed crystal planes of surficial CuO and CuAl₂O₄ were determined according to characterization results. Calculation results showed that, compared with CuO (111), H₂S and PH₃ have weaker adsorption strength on CuAl₂O₄ (100) which is not conducive to their adsorption and removal.     

燃烧生成棕色碳的三维荧光光谱分析

模拟燃烧11 种常见物质(秸杆、木材、煤和生活垃圾等),并收集烟气中可溶于甲醇的有机产物,利用紫外-可见吸收光谱(UV-Vis)和三维荧光光谱(EEMs)对收集的甲醇可溶性有机物(MSOM)进行表征.进一步,结合非负矩阵分解法(NMF)提取三维荧光光谱主要组分的特征激发/发射光谱,根据荧光信号轮廓差异对不同种类物质进行区分,旨在建立棕色碳溯源依据.结果显示,秸杆和木材燃烧源棕色碳在紫外-可见吸收光谱上呈现相似的谱形,均在265nm处存在肩峰;瓦楞纸板和塑料燃烧源棕色碳的吸收则随波长增加单一下降.由于基本组分相同,各生物质及纸板对应的棕色碳的EEM有着相似的轮廓,NMF解析结果表明,生物质和纸板的MSOM存在3种主要荧光组分,分别为两种类腐殖质C1、C2和类蛋白质C3;煤的EEM在长波处有较强的分布,可归因于芳香类基团,由其EEM分解出M1、M2和M3荧光团,三者位置均较生物质红移.根据荧光团位置以及光谱信号轮廓特征,可对生物质和煤进行区分;泡沫、塑料袋和塑料瓶属于有机高分子材料,其EEM与生物质有较大的差别,且三者之间也存在差异,泡沫和塑料袋的MSOM含有4种荧光成分,而从塑料瓶的MSOM中只可得到两种荧光团,特征明显.     

Comparative lifecycle greenhouse gas emissions and their reduction potential for typical petrochemical enterprises in China

Petrochemical enterprises have become a major source of global greenhouse gas (GHG) emissions. Yet, due to the unavailability of basic data, there is still a lack of case studies to quantify GHG emissions and provide petrochemical enterprises with guidelines for implementing energy conservation and emission reduction strategies. Therefore, this study conducted a life cycle assessment (LCA) analysis to estimate the GHG emissions of four typical petrochemical enterprises in China, using first-hand data, to determine possible emission reduction measures. The analytical data revealed that Dushanzi Petrochemical (DSP) has the highest GHG emission intensity (1.17 tons CO₂e/ton), followed by Urumqi Petrochemical (UP) (1.08 tons CO₂e/ton), Dalian Petrochemical (DLP) (average 0.58 tons CO₂e/ton) and Karamay Petrochemical (KP) (average 0.50 tons CO₂e/ton) over the whole life cycle. At the same time, GHG emissions during fossil fuel combustion were the largest contributor to the whole life cycle, accounting for about 77.31%–94.27% of the total emissions. In the fossil-fuel combustion phase, DSP had the highest unit GHG emissions (1.20 tons CO₂e), followed by UP (0.89 tons CO₂e). In the industrial production phase, DLP had the highest unit GHG emissions (average 0.13 tons CO₂e/ton), followed by UP (0.10 tons CO₂e/ton). During the torch burning phase, torch burning under accident conditions was the main source of GHG emissions. It is worth noting that the CO₂ recovery stage has "negative value," indicating that it will bring some environmental benefits. Further scenario analysis shows that effective policies and advanced technologies can further reduce GHG emissions.     

Ce改性钒磷氧催化剂的制备及其脱硝性能研究

采用Ce调控负载型钒磷氧（VPO/TiO₂）催化剂的表面酸性并与之形成密切相关的微观结构,研究催化剂VPO-Ce/TiO₂的脱硝性能.结果表明,当P/V为1/3、Ce/V为1/4、活性组分负载量10%、催化剂焙烧温度为400℃时,催化剂的脱硝活性最好,反应温度250~350℃范围内的脱硝率高于96.0%.BET测试结果表明,催化剂0.1VP（0.33）O-Ce（0.25）/TiO₂的比表面积为10.74m²/g,较0.1VP（0.33）O/TiO₂提高了约58.6%.0.1VP（0.33）O/TiO₂表面化学吸附氧（O_α）和晶格氧（O_β）的比例O_α/O_β为72%,掺杂Ce后O_α/O_β升高至85%,Ce掺杂还能促进相邻V⁵⁺和V⁴⁺的形成,提高催化剂的氧化还原性能.Ce掺杂对催化剂的表面酸性影响较大,当Ce/V为1/4时催化剂表面Brønsted酸最强,这与活性测试相吻合.控制烟气中SO₂和水蒸气的体积浓度分别为200×10^-6和4vol.%,催化剂的脱硝活性在150~300℃温度范围内最高下降约15.8%,当温度高于300℃时催化剂的脱硝活性几乎不下降,且反应后的催化剂表面无硫酸根生成,催化剂呈现出较强的抗SO₂和水蒸汽的性能.     

Monitoring biofouling based on aerobic respiration in reverse osmosis system

A monitoring method of biofouling in reverse osmosis (RO) system was proposed based on the fluorescent signal of resorufin, which is reduced by nicotinamide adenine dinucleotide released from viable cells during aerobic respiration. The fluorescent signal of resorufin reduced by planktonic cells and microorganisms of biofilm showed linearity, indicating its feasibility to monitor biofouling in a RO system. For the application of the method to the lab-scale RO system, the injection concentration of resazurin and the injection flow rate were optimized. Biofilm on RO membranes continuously operated in a lab-scale RO system was estimated by resorufin fluorescence under optimized detection condition. As a result, resorufin fluorescence on RO membrane showed a significant increase in which the permeability of RO system decreased by 30.48%. Moreover, it represented the development of biofilm as much as conventional biofilm parameters such as adenosine triphosphate, extracellular polymeric substances, and biofilm thickness. The proposed method could be used as a sensitive and low-cost technology to monitor biofouling without autopsy of membranes.     

Understanding the electrode reaction process of dechlorination of 2,4-dichlorophenol over Ni/Fe nanoparticles: Effect of pH and 2,4-dichlorophenol concentration

Herein,with the exploitation of iron and nickel electrodes,the 2,4-dichlorophenol(2,4-DCP)dechlorinating processes at the anode and cathode,respectively,were separately studied via various electrochemical techniques(e.g.,Tafel polarization,linear polarization,electrochemical impedance spectroscopy).With this in mind,Ni/Fe nanoparticles were prepared by chemical solution deposition,and utilized to test the dechlorination activities of 2,4-DCP over a bimetallic system.For the iron anode,the results showed that higher 2,4-DCP concentration and solution acidity aggravated the corrosion within the electrode.The charge transfer resistance(R_(ct))values of the iron electrode were 703,473,444,and 437Ω·cm~2 for the initial 2,4-DCP concentrations of0,20,50,and 80 mg/L,respectively.When the bulk pH of the 2,4-DCP solution varied from 3.0,5.0to 7.0,the corresponding R_(ct) values were 315,376,and 444Ω·cm~2,respectively.For the nickel cathode,the reduction current densities on the electrode at-0.75 V(vs.saturated calomel electrode)were 80,106,and 111μA/cm~2,for initial 2,4-DCP concentrations of 40,80,and125 mg/L.The dechlorination experiments demonstrated that when the initial pH of the solution was 7.0,5.0,and 3.0,the dechlorination percentage of 2,4-DCP by Ni/Fe nanoparticles was 62%,69%,and 74%,respectively,which was in line with the electrochemical experiments.10 wt.%Ni loading into Ni/Fe bimetal was affordable and gave a good dechlorination efficiency of 2,4-DCP,and fortunately the Ni/Fe nanoparticles remained comparatively stable in the dechlorination processes at pH 3.0.     

上海市专项化学品制造行业VOCs排放特征及臭氧生成潜势研究

选取上海市某工业区内专项化学品制造行业中有代表性的10家企业,使用苏玛罐对各企业有组织排放废气进行采样,通过GC-MS（气相色谱-质谱联用仪）对106种VOCs进行分析,研究了专项化学品制造行业的VOCs排放特征,并使用MIR（最大增量反应活性）法计算了各企业排放VOCs对臭氧生成的贡献.结果表明:OVOCs（含氧挥发性有机物）和芳香烃是专项化学品制造行业的VOCs特征组分,OVOCs与芳香烃质量分数之和为65.0%~100.0%;8家企业排放的VOCs中质量分数最高的物种均为OVOCs,w（OVOCs）为55.8%~99.9%.异丙醇、四氢呋喃、丙酮、乙酸乙酯等OVOCs及苯、甲苯等芳香烃是专项化学品制造行业的特征物种.10家企业排放VOCs的OFP（臭氧生成潜势）为1.9~933.5 mg/m 3,OVOCs和芳香烃是专项化学品制造企业的主要活性组分,累计对OFP的贡献率在80.1%~100.0%之间.异丙醇、四氢呋喃、丙酮、乙酸乙酯、甲基异丁基酮、苯和甲苯等是专项化学品制造行业的关键活性物种.研究显示,专项化学品制造行业VOCs污染治理应重点控制OVOCs和芳香烃.      

多级串联表面流库塘-湿地净化农田径流效果评价

农田径流已成为湖泊流域非点源污染治理的主要制约因素.为研究多级串联表面流库塘-湿地中各级表面流湿地对洱海流域农田径流水体的净化效果,以大理市喜洲镇美坝村新建的多级串联表面流库塘-湿地为研究对象,跟踪监测其各级表面流湿地进、出水中ρ（TN）、ρ（NO₃--N）和ρ（TP）,分析水质净化效果及营养盐质量浓度沿程变化规律.结果表明:①多级串联表面流库塘-湿地出水ρ（TN）、ρ（NO₃--N）和ρ（TP）平均值分别为1.77、1.18和0.05 mg/L,低于GB 3838—2002《地表水环境质量标准》中Ⅴ类标准限值,TN、NO₃--N和TP去除率分别为57.75%、65.54%和67.43%.②农田径流在经过沉淀池、一级和二级表面流湿地后,对TN、NO₃--N和TP的去除率已分别达45.35%、52.21%和50.59%,且二级表面流湿地中出水ρ（TN）、ρ（NO₃--N）和ρ（TP）分别为2.36、1.69和0.06 mg/L,已达到较好的出水水质.③氮、磷营养盐质量浓度沿程削减模型拟合结果表明,指数削减模型较适宜表征TN、NO₃--N在多级串联表面流库塘-湿地中的沿程削减过程,而TP的最佳削减模型为线性削减模型.研究显示,多级串联表面流库塘-湿地对农田径流具有较好的净化效果,其对营养盐净化作用主要体现在前两级表面流湿地.      

Facile synthesis of graphitic carbon-nitride supported antimony-doped tin oxide nanocomposite and its application for the adsorption of volatile organic compounds

Antimony-doped tin oxide(ATO) nanoparticles with an average size of ～ 6 nm were prepared by co-precipitation and subsequent heat treatment. Graphitic carbon nitride(g-CN)/ATO hybrid nanocomposite was designed by the combination of thermally synthesized g-CN and ATO nanoparticles by ultrasonication. The materials were characterized using N2 adsorption/desorption(BET), X-ray diffraction(XRD), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and Fourier transform infrared spectroscopy(FTIR). A mixture of five volatile organic compounds(VOCs, chloroform, benzene, toluene, xylene and styrene) was used to compare the adsorption capacity of the samples. The adsorption capacity of ATO nanoparticles was improved by the addition of g-CN. Experimental data showed that, among the five VOCs,chloroform was the least adsorbed, regardless of the samples. The g-CN/ATO showed nearly three times greater adsorption capacity for the VOC mixture than pure ATO. The unchanged efficiency of VOC adsorption during cyclic use demonstrated the completely reversible adsorption and desorption behavior of the nanocomposite at room conditions. This economically and environmentally friendly material can be a practical solution for outdoor and indoor VOC removal.     

Vertical response of microbial community and degrading genes to petroleum hydrocarbon contamination in saline alkaline soil

A column microcosm was conducted by amending crude oil into Dagang Oilfield soil to simulate the bioremediation process. The dynamic change of microbial communities and metabolic genes in vertical depth soil from 0 to 80 cm were characterized to evaluate the petroleum degradation potential of indigenous microorganism. The influence of environmental variables on the microbial responds to petroleum contamination were analyzed. Degradation extent of 42.45% of n-alkanes(C8–C40) and 34.61% of 16ΣPAH were reached after 22 weeks. Relative abundance of alkB, nah, and phe gene showed about 10-fold increment in different depth of soil layers. Result of HTS profiles demonstrated that Pseudomonas, Marinobacter and Lactococcus were the major petroleum-degrading bacteria in0–30 and 30–60 cm depth of soils. Fusarium and Aspergillus were the dominant oil-degrading fungi in the 0–60 cm depth of soils. In 60–80 cm deep soil, anaerobic bacteria such as Bacteroidetes, Lactococcus, and Alcanivorax played important roles in petroleum degradation.Redundancy analysis(RDA) and correlation analysis demonstrated that petroleum hydrocarbons(PHs) as well as soil salinity, clay content, and anaerobic conditions were the dominant effect factors on microbial community compositions in 0–30, 30–60, and 60–80 cm depth of soils, respectively.