Investigation of the effects of static magnetic field on apoptosis in bone marrow stem cells of rat

This research was carried out to evaluate the influence of static magnetic field on the rate of apoptosis in bone marrow stem cells (BMSCs) of rats. Extracted cells were suspended in αMEM as a culture media for 48 h. After that, cells were exposed to 15 mT static magnetic field (SMF) for 5 h, incessantly with or without FeCl₂. The rate of apoptosis was then assessed via flow cytometery. The results showed that either treatment with FeCl₂ or exposure to SMF enhanced the rate of apoptotic cells. Moreover, cells that were treated simultaneously with FeCl₂ and SMF have higher rate of apoptosis. An increase in apoptosis by 26.5% was induced by SMF alone and an increase in apoptosis by 28.2% was induced by a combination of FeCl₂ and SMF, compared to their corresponding controls. The results recommended that the effects of SMF on apoptosis may be related to increment of the number of free radicals in the cells.     

A Box-Behnken design for determining the optimum experimental condition of the fungicide (Vapam) sorption onto soil modified with perlite

In the present study, response surface methodology (RSM) based on the Box-Behnken design (BBD) was employed to investigate the effects of the different operating conditions on the removal of the fungicide (Vapam) onto soil modified with perlite using sorption process. The process parameters such as pH of the fungicide solution (2, 5 and 8), temperature (15, 25 and 35°C), shaking time (2, 13 and 24 h) and the percentage of perlite in the modified soil (0, 2 and 4 %) were investigated using a four-factor-three-level Box-Behnken design at an initial fungicide concentration of C(0) = 1.6 mg/L as a fixed input parameter. A second-order quadratic model suggested the optimum conditions to be as follows: fungicide solution pH of 3.57, temperature of 15°C, shaking time of 3.5 h and 4% of perlite in the modified soil which resulted in the improvement of Vapam sorption. Under optimum conditions, the fungicide (Vapam) removal was predicted 12.88 μg/g by BBD. The confirmatory experiments were conducted and the results revealed that the fungicide removal was 13.14 μg/g which indicated that the predicted and the observed values of response (Vapam removal) were in close agreement. Therefore, the soil modified with perlite holds good potential for Vapam sorption. This is the first report on fungicide Vapam sorption onto soil modified with perlite using statistical experimental design employing response surface methodology.     

The influence of crime prevention through environmental design on victimisation and fear of crime

People's perception of crime and incivilities vary considerably depending on their attitudes towards environmental conditions. This paper investigated the hypothesised relationships between Crime Prevention Through Environmental Design (CPTED), victimisation and fear of crime. The checklist was administered by using on-site observation to measure the CPTED construct followed by a self-administered questionnaire to explore the residents' perceptions of victimisation and fear of crime in their area of residency. In all, 164 respondents from a selected group of residents were involved in this study. The structural equation modelling technique was employed and the results indicate that CPTED is negatively related to victimisation. The model also shows that there is a significant positive direct influence of victimisation on fear of crime. However, no direct significant relationship was found between CPTED and fear of crime, but a negative indirect relationship between CPTED and fear of crime was observed through victimisation.     

Fate of metolachlor under subirrigation in a sandy soil: A lysimeter study

Abstract

A three‐year field lysimeter study was conducted to investigate the role of subirrigation systems in reducing the risk of water pollution from metolachlor (2‐chloro‐N‐(2‐ethyl‐6‐methlphenyl)‐N‐(2‐methoxy‐l‐methylethyl)acetamide). Nine large PVC lysimeters, 1 m long x 0.45 m diameter, were packed with a sandy soil. Three water table management treatments, i.e. two subirrigation treatments with constant water table depths of 0.4 and 0.8 m, respectively, and a free drainage treatment in a completely randomized design with three replicates were used. Corn (Zea mays L.) was grown in each lysimeter, and at the beginning of summer of each year metolachlor was applied, at the locally recommended rate of 2.75 kg a.i./ha. Soil and water samples were collected at different time intervals after each natural or simulated rainfall event. Metolachlor was extracted from these samples and analyzed using Gas Chromatography.

Results obtained in this three year study, (1993–1995), lead to the conclusion that metolachlor is quite mobile since it leached to a depth of 0.85 m below the soil surface quite early in the growing season. Metolachlor concentrations decreased with depth as well as with time. The shallower water table in the 0.4 m subirrigation treatment showed less residues in the soil solution than that of other treatments. However, a mass balance study, supported by an independent laboratory investigation, shows that water table management, statistically, has no significant effect on the reduction of metolachlor residues in sandy soils.     

Uptake and distribution of phenanthrene and pyrene in roots and shoots of maize (Zea mays L.)

Polycyclic aromatic hydrocarbons as byproducts of carbon-based fuel combustion are an important group of pollutants with wide distribution in the environment. Polycyclic aromatic hydrocarbons are known as toxic compounds for almost all organisms. Different plant species can uptake polycyclic aromatic hydrocarbons by roots and translocate them to various aerial parts. The aim of this study is to investigate the uptake, translocation, and accumulation of pyrene and phenanthrene in maize under controlled conditions. Seeds were cultivated in perlite containing 25, 50, 75, and 100 ppm of phenanthrene and pyrene, and their concentrations in the roots and shoots of the plants were measured using high-performance liquid chromatography technique after 7, 14, and 21 days. The results revealed that phenanthrene naturally existed in maize and its concentration showed a time-dependent decrease in shoots and roots. In contrast, the concentration of pyrene was increased in the roots and reduced in the shoots. Although pyrene had higher uptake than phenanthrene in roots of maize, the translocation factor value for pyrene was lower than for phenanthrene. According to these findings, phenanthrene could be metabolized in maize in the shoot and root tissues, but pyrene had more tendency to be accumulated in roots.

     

Application of ultrasound irradiation in landfill leachate treatment

Environmental Science and Pollution Research - Landfilling is known to be the most widely used method in municipal solid waste management in many countries. Landfill leachate containing different...     

Trace elements in the shoreline and seabed sediments of the southern Caspian Sea: investigation of contamination level,distribution, ecological and human health risks,and elemental partition coefficient

Environmental Science and Pollution Research - This study assesses the occurrence of trace elements (TEs) in sediments of the southern Caspian Sea. A total of 16 shoreline sediment samples and 15...     

Sample Preparation Followed by High Performance Liquid Chromatographic (HPLC) Analysis for Monitoring Muconic Acid as a Biomarker of Occupational Exposure to Benzene

Factors affecting solid phase extraction (SPE) of trans,trans-muconic acid (ttMA), as a benzene biomarker, including sample pH, sample concentration, sample volume, sample flow rate, washing solvent, elution solvent, and type of sorbent were evaluated. Extracted samples were determined by HPLC-UV(highperformance liquid chromatography-ultraviolet). The analytical column was C18, UV wave length was 259 nm, and the mobile phase was H2O/methanol/acetic acid run at flow rate of 1 ml/min. A strong anion exchange silica cartridge was found successful in simplifying SPE. There was a significant difference between recoveries of ttMA when different factors were used (p < .001). An optimum recovery was obtained when sample pH was adjusted at 7. There was no significant difference when different sample concentrations were used (p > .05). The optimized method was then validated with 3 different pools of samples showing good reproducibility over 6 consecutive days and 6 within-day experiments.     

Radiation heat transfer in transient dust cloud flame propagation

This study investigates the impact of radiation heat transfer and heat conduction on dust cloud combustion. Radiation plays a very important role in the stability of dust cloud flame, and increasing the amount of radiation drastically raises the possibility of instability and explosion in a dust cloud mixture. Flame speed, which is a function of mixture characteristics, can exhibit a fluctuating behavior. By using the discrete heat source method, it would be possible to study the transient propagation of dust flames. Thus, the propagation speed of flame can be obtained, and as time goes by, the transient speed of dust flame will reach its steady state value. By considering the radiation effect, better agreement is observed between the obtained results and experimental data.