Assessing biological and chemical signatures related to nutrient removal by floating islands in stormwater mesocosms

Aquatic floating plants on BioHaven mats were tested for their potential use as a Best Management Practice to be incorporated within existing stormwater detention ponds. Plants were analyzed for their capability to remove nutrient-pollution in parallel with the study of ecological dynamics. Experiments were carried out in cylindrical mesocosms of 5 m diameter and 1.2 m height, above-ground pools with a water volume of 14 m³. The design parameters tested were for 5% and 10% vegetated floating island coverage of the mesocosm, both with and without shoreline plants called littoral zone. This littoral shelf was 0.5 m thick, graded at a downward slope of 1:5 toward the center using loamy soil with low organic matter content, excavated from below turf grass. Endemic plant species were chosen for the experimental location in central Florida based on a wetland identification manual by the Florida Department of Environmental Protection to ensure the study was not compromised by unique climate requirements of the plants. Nutrient and aquatic chemical conditions such as pH, dissolved oxygen, temperature, turbidity, and chlorophyll a were monitored to understand their relationships to the general wetland ecosystem. Real-time polymerase chain reaction analysis identified the microbial activity near the rhizospheric zone. Logistical placement considerations were made using spatial sampling across the horizontal plane of the mesocosms, beneath and around the root zone, to determine if nutrients tend to aggregate around the floating island. This study concluded that the application of floating islands as a stormwater technology can remove nutrients through plant uptake and biological activity. The most cost-effective size in the outdoor mesocosms was 5% surface area coverage of the mat.     

Geostatistical Assessment of the Impact of World War I on the Spatial Occurrence of Soil Heavy Metals

Previous research showed a regional Cu enrichment of 6 mg kg⁻¹ in the top soil of the Ypres war zone (Belgium), caused by corrosion of WWI shell fragments. Further research was required since in addition to Cu, also As, Pb, and Zn were used during the manufacturing of ammunition. Therefore, an additional data collection was conducted in which the initial Cu data set was tripled to 731 data points and extended to eight heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) which permitted (1) to evaluate the environmental impact of the heavy metals at a regional scale and (2) to assess their regional spatial occurrence by performing an optimized geostatistical modeling. The results showed no pollution at a regional scale, but sometimes locally concentrations exceeded the soil sanitation threshold, especially for Cu, Pb, and Zn. The spatial patterns of Ni and Cr were related to variations in soil texture whereas the occurrences of Cu and Pb were clearly linked to WWI activities. This difference in spatial behavior was confirmed by an analysis of coregionalization.     

Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology

In this study on the basis of lab data and available resources in Bangladesh, feasibility study has been carried out for pyrolysis process converting solid tire wastes into pyrolysis oils, solid char and gases. The process considered for detailed analysis was fixed-bed fire-tube heating pyrolysis reactor system. The comparative techno-economic assessment was carried out in US$ for three different sizes plants: medium commercial scale (144 tons/day), small commercial scale (36 tons/day), pilot scale (3.6 tons/day). The assessment showed that medium commercial scale plant was economically feasible, with the lowest unit production cost than small commercial and pilot scale plants for the production of crude pyrolysis oil that could be used as boiler fuel oil and for the production of upgraded liquid-products.     

Numerical Simulation of Gas Injection in Vertical Water Saturated Porous Media

We present numerical simulations of drainage induced by air injection in a vertical water-saturated Hele-Shaw cell filled with glass microbeads. We use the macroscale Subsurface Transport Over Multiple Phases (STOMP) simulator developed by the Pacific Northwest National Laboratory’s Hydrology Group. To trigger fingering, we use random permeability fields consistent to capillary entry pressure fields. We compare the numerical results to our own experimental results shown in a previous study. We analyze the effects of the microheterogeneity degree as well as the macroscopic parameters on the gas saturation results. The main objective of the work is to investigate how microscopic effects could be accounted for by macroscopic variables during drainage.     

Risk Analysis of Invasive Species Introduction in the Port of Arzew,by Calculation of Biofouling Surface on Ships’ Hulls

Historically, the biofouling of ships’ hulls has always been considered amongst the oldest mechanisms causing the introduction of marine invasive species. However, in the last few decades, studies have been oriented mainly towards the introduction of non-indigenous species via ballast water, at the expense of biofouling. In this study, an alternative approach that deals with this latter parameter as the main factor of the introduction of marine organisms is proposed. The biofouling surface area of all vessels which have made call at Arzew port in Algeria is calculated over a period of one year (2014). This parameter indicates the importance of the pressure of propagule that corresponds to the successful introduction effort of a species, since it is this submerged surface of the ship that hosts organisms and spreads them all over the world. We associate to each calculated biofouling surface a bioregion of origin, as well as other parameters such as the number of vessels, their maritime routes and the environmental similarity of Arzew port’s seawater and the other different bioregions. We highlight according to the bioregion, the surfaces that constitute a critical risk of the species introduction and those that constitute a minor risk The study showed that over a period of 1 year, 1313 ships from 28 different bioregions that have made call at Arzew port have accumulated a total wet surface corresponding to about nine million square meters. It is worth to mention that this field of research requires special attention from academics as it may lead to more effective methods to prevent future exotic species introductions.     

The potential perils of Sal forests land grabbing in Bangladesh: an analysis of economic,social and ecological perspectives

Environment, Development and Sustainability - The increased demand for foods and commercialization of the commodity markets has resulted in enormous interest in arable land resources, leading to a...     

Adsorption of methylene blue from aqueous solution by jackfruit (Artocarpus heteropyllus) leaf powder: A fixed-bed column study

Continuous fixed-bed studies were undertaken to evaluate the efficiency of jackfruit leaf powder (JLP) as an adsorbent for the removal of methylene blue (MB) from aqueous solution under the effect of various process parameters like bed depth (5–10 cm), flow rate (30–50 mL/min) and initial MB concentrations (100–300 mg/L). The pH at point of zero charge (pH_PZC) of the adsorbent was determined by the titration method and a value of 3.9 was obtained. A FTIR of the adsorbent was done before and after the adsorption to find the potential adsorption sites for interaction with methylene blue molecules. The results showed that the total adsorbed quantities and equilibrium uptake decreased with increasing flow rate and increased with increasing initial MB concentration. The longest breakthrough time and maximum MB adsorption were obtained at pH 10. The results showed that the column performed well at low flow rate. Also, breakthrough time and exhaustion time increased with increasing bed depth. The bed-depth service time (BDST) model and the Thomas model were applied to the adsorption of MB at different bed depths, flow rates, influent concentrations and pH to predict the breakthrough curves and to determine the characteristic parameters of the column that are useful for process design. The two model predictions were in very good agreement with the experimental results at all the process parameters studied indicating that they were very suitable for JLP column design.     

Investigating the relationship between lead speciation and bioaccessibility of mining impacted soils and dusts

Environmental Science and Pollution Research - Lead (Pb) bioaccessibility measurements have been the subject of much research in recent years, given the desire to develop a cost-effective and...     

Spatio-temporal assessment and trend analysis of surface water salinity in the coastal region of Bangladesh

The study was designed to collect water samples over two seasons—wet-monsoon season (n = 96) (March–April) and dry-monsoon season (n = 44) (September–October)—to understand the seasonal variation in anion and cation hydrochemistry of the coastal rivers and estuaries contributing in the spatial trend in salinity. Hydrochemical examination of wet-monsoon season primarily revealed Ca–Mg–HCO₃ type (66%) and followed by Na–Cl type (17.70%) water. In the dry-monsoon season, the scenario reversed with primary water being Na–Cl type (52.27%) followed by Ca–Mg–HCO₃ type (31.81%). Analysis of Cl/Br molar ratio vs. Cl (mg/L) depicted sampling area affected by seawater intrusion (SWI). Spatial analysis by ordinary kriging method confirmed approximately 77% sample in the dry-monsoon, and 34% of the wet-monsoon season had shown SWI. The most saline-intruded areas in the wet-monsoon seasons were extreme south-west coastal zone of Bangladesh, lower Meghna River floodplain and Meghna estuarine floodplain and south-eastern part of Chittagong coastal plains containing the districts of Chittagong and Cox’s Bazar adjacent to Bay of Bengal. In addition, mid-south zone is also affected slightly in the dry-monsoon season. From the analyses of data, this study could further help to comprehend seasonal trends in the hydrochemistry and water quality of the coastal and estuarine rivers. In addition, it can help policy makers to obligate some important implications for the future initiatives taken for the management of land, water, fishery, agriculture and environment of coastal rivers and estuaries of Bangladesh.

     

Health risk assessment due to heavy metal exposure from commonly consumed fish and vegetables

Contamination of heavy metals in fish and vegetables is regarded as a major crisis globally, with a large share in many developing countries. In Bogra District of Bangladesh, concentrations of six heavy metals, i.e., chromium (Cr), nickel (Ni), copper (Cu), arsenic (As), cadmium (Cd) and lead (Pb), were evaluated in the most consumed vegetables and fish species. The sampling was conducted during February–March 2012 and August–September 2013. The levels of metals varied between different fish and vegetable species. Elevated concentrations of As, Cd and Pb were observed in vegetable species (Solanum tuberosum, Allium cepa and Daucus carota), and fish species (Anabas testudineus and Heteropneustes fossilis) were higher than the FAO/WHO permissible limits, indicating these three metals might pose risk from the consumption of these vegetable and fish species. The higher concentration of heavy metals in these vegetable species might be due to the higher uptake from soil and sediment ingestion behavior in fish species. Multivariate principal component analysis (PCA) showed significant anthropogenic contributions of Cr, Ni, Cu and Pb in samples as the PCA axis scores were correlated with scores of anthropogenic activities. Target hazard quotients showed that the intakes of Cu, As and Pb through vegetables and fish were higher than the recommended health standards, indicated non-carcinogenic risk. Therefore, intakes of these elements via fish and vegetables for Bangladeshi people are a matter of concern.