Stakeholders on Meat Production, Meat Consumption and Mitigation of Climate Change: Sweden as a Case

In this paper we analyse and discuss the views of Swedish stakeholders on how to mitigate climate change to the extent it is caused by meat production. The stakeholders include meat producer organisations, governmental agencies with direct influence on meat production, political parties as well as non-governmental organisations. Representatives of twelve organisations were interviewed. Several organisations argued against the mitigation option of reducing beef production despite the higher greenhouse gas intensity of beef compared to pork and chicken meat (according to life cycle analysis). Regarding feed production some organisations proposed use of the best available industrial fertilizers, others were against all use of such fertilizers. Several organizations suggested domestic production of more protein-rich fodder and use of manure for biogas production. Regarding meat consumption the focus was on throwing away less food as waste and on eating less meat but the best (most climate friendly) meat, which was considered to be Swedish meat in contrast to imported meat. There was agreement on many issues. Most disagreement was found regarding political steering. We find many of the stakeholders’ mitigation proposals regarding meat production and consumption acceptable. However, we are to some extent critical to their defence of Swedish beef production. We also point out certain problems with the suggestion to reduce consumption of imported meat but not of domestically produced meat.     

Greenhouse gas emissions from MSW incineration in China: Impacts of waste characteristics and energy recovery

Determination of the amount of greenhouse gas (GHG) emitted during municipal solid waste incineration (MSWI) is complex because both contributions and savings of GHGs exist in the process. To identify the critical factors influencing GHG emissions from MSWI in China, a GHG accounting model was established and applied to six Chinese cities located in different regions. The results showed that MSWI in most of the cities was the source of GHGs, with emissions of 25–207 kg CO₂-eq t^?1 rw. Within all process stages, the emission of fossil CO₂ from the combustion of MSW was the main contributor (111–254 kg CO₂-eq t^?1 rw), while the substitution of electricity reduced the GHG emissions by 150–247 kg CO₂-eq t^?1 rw. By affecting the fossil carbon content and the lower heating value of the waste, the contents of plastic and food waste in the MSW were the critical factors influencing GHG emissions of MSWI. Decreasing food waste content in MSW by half will significantly reduce the GHG emissions from MSWI, and such a reduction will convert MSWI in Urumqi and Tianjin from GHG sources to GHG sinks. Comparison of the GHG emissions in the six Chinese cities with those in European countries revealed that higher energy recovery efficiency in Europe induced much greater reductions in GHG emissions. Recovering the excess heat after generation of electricity would be a good measure to convert MSWI in all the six cities evaluated herein into sinks of GHGs.     

Development of pretreatment protocol for DNA extraction from biofilm attached to biologic activated carbon (BAC) granules

The biologic activated carbon (BAC) process is widely used in drinking water treatments. A comprehensive molecular analysis of the microbial community structure provides very helpful data to improve the reactor performance. However, the bottleneck of deoxyribonucleic acid (DNA) extraction from BAC attached biofilm has to be solved since the conventional procedure was unsuccessful due to firm biomass attachment and adsorption capacity of the BAC granules. In this study, five pretreatments were compared, and adding skim milk followed by ultrasonic vibration was proven to be the optimal choice. This protocol was further tested using the vertical BAC samples from the full-scale biofilter of Pinghu Water Plant. The results showed the DNAyielded a range of 40 μg·g⁻¹ BAC (dry weight) to over 100 μg·g⁻¹ BAC (dry weight), which were consistent with the biomass distribution. All results suggested that the final protocol could produce qualified genomic DNA as a template from the BAC filter for downstream molecular biology researches.     

Ecological Survey of Coastal I Water Adjacent to Nuclear Power I Plants in Taiwan

A total of six nuclear reactors installed in three power plants, two along the northern and one along the southern coasts of Taiwan, started their operations one after another since October 1977. Owing to the large quantities of cooling water intake into and discharge from the plants, some environmental factors such as water temperature, chlorine, environmental radioactivity and nearshore currents may be significantly changed. Variations of these abiotic environmental factors may influence the biological activities in the ecosystem, particularly doing some kinds of damage to marine biological resources. Therefore, the possible environmental impact upon the biological systems including the fishery resources along the northern and southern coasts of Taiwan should be studied before and during the plant operation.

We have started the long-term programmes of biological, chemical and hydro-graphical surveys of the nuclear power plant sites on both northern (since July 1974) and southern (since July 1979) coasts of Taiwan. the survey items include ocean currents, physical and chemical properties of sea water, primary productivity, specific compositions and interspecific relationships among phyto- and zooplankton, algae, invertebrates, corals, and fishes; and radionuclides in water and biological specimens, and fishery statistics. in general, except for a few events, the operations of the six units of nuclear power plants have not produced detectable effects on the marine ecosystem. Radio activity levels and radionuclides in water and the biological specimens remained the same as background levels throughout the survey period. However, the events of coral bleaching and fish body anomalies caused by thermal discharges were observed respectively along the outlets of third and second Nuclear Power Plants. the purposes of this paper are to report and evaluate these two events during the operations of nuclear power plants in Taiwan.     

Response of gill ATPase and liver esterase of pseudorasobora parva to a two month exposure to glyphosate and metsulfuron methyl

Responses of gill ATPase and liver esterase of topmouth gudgeon, Pseudorasobora parva under sublethal exposure to glyphosate (WSC 41% as isopropyl amine salt) at 1.0, 5.0 and 25?mg/L and metsulfuron methyl (technical 98.2%) at 0.0095, 0.085 and 0.85?mg/L of water were measured at 8th, 16th, 24th and 65th days of exposure. Two way analysis of variance (ANOVA) followed by least significant difference (LSD) test and parameter estimates indicated a significant inhibitory effect on gill ATPase activity (max. 57%) by metsulfuron methyl and liver esterase activity by glyphosate (max. 43%) as compared to the control, but the differences in the residual activities among the concentration levels of the herbicides were not significant. The activities changed significantly with the sampling times except gill ATPase activity under metsulfuron methyl exposure. In most of the cases, the maximum inhibitory effect on the enzymes was recorded on the 8th day and over-recovering appeared with time.     

Application of an enzyme-linked immunosorbent assay for the detection of clenbuterol residues in swine urine and feeds

The present study outlines applications of an enzyme-linked immunosorbent assay (ELISA) for the analysis of clenbuterol residues. Antisera were raised from rabbits immunized with diazotized clenbuterol-bovine serum albumin (BSA) conjugate. The assay was specific to clenbuterol with a half-maximum inhibition concentration (IC₅₀) of 1.8 ng/mL and 2.5 ng/mL in blank swine urine and phosphate buffer solution, respectively. The assay had high cross-reactivity (86%) with mabuterol, but low with other adrenergic agonists and antagonists. The average recovery of clenbuterol, as measured with the ELISA, ranged from 90% to 112% in swine urine samples and from 86% to 95% in feeds, respectively. This new assay was compared with commercial ELISA test kits. An excellent correlation (r ² = 0.98) between the two methods and satisfactory recoveries suggest that the new assay can be suitable for the determination of clenbuterol residues in real samples. The assay was used to analyze clenbuterol residues in 103 swine urine samples and 68 feed samples collected from northern China. Approximately 50% of the urine samples and 25% of the feed samples analyzed were found positive (concentration of clenbuterol ≥ 1 ppb). The results indicate that clenbuterol was misused in some of the areas surveyed.     

聚合氯化铝与三氯化铁混凝剂在常规水处理中的运用

通过聚合氯化铅与三氯化铁在常规水处理的生产性实验，从经济成本、水质指标和实际使用存在的问题对其进行分析比较，并比较了两种混凝剂在常规水处理中的优缺点。     

Ammonium-dependent regulation of aerobic methane-consuming bacteria in landfill cover soil by leachate irrigation

The impacts of landfill leachate irrigation on methane oxidation activities and methane-consuming bacteria populations were studied by incubation of landfill cover soils with leachate and (NH₄)₂SO₄ solution at different ammonium concentrations. The community structures and abundances of methane-oxidizing bacteria (MOB) and ammonia-oxidizing bacteria (AOB) were examined by PCRDGGE and real-time PCR. Compared with the pure (NH₄)₂SO₄ solution, leachate addition was found to have a positive effect on methane oxidation activity. In terms of the irrigation amount, ammonium in leachate was responsible for the actual inhibition of leachate. The extent of inhibitory effect mainly depended on its ammonium concentration. The suppression of the predominant methaneconsuming bacteria, type I MOB, was responsible for the decreased methane oxidation activity by ammonium inhibition. Methaneconsuming bacteria responded diversely in abundance to ammonium. The abundance of type I MOB decreased by fivefold; type II MOB showed stimulation response of fivefold magnification upon the first addition but lessened to be lower than the original level after the second addition; the amount of AOB was stimulated to increase for 20-30 times gradually. Accumulated nitrate from nitrification strengthened the ammonium inhibition on type I and type II MOB, as a result, repetitive irrigation was unfavorable for methane oxidation.     

Responses of protists with different feeding habits to the changes of activated sludge conditions: A study based on biomass data

Changes of protists, which were categorized into different functional groups primarily according to their feeding habits, in two full-scale municipal wastewater treatment systems experiencing sludge bulking were investigated over a period of 14 months. Protist biomass represented 3.7% to 5.2% of total biomass on average under normal sludge conditions, and the percentage increased significantly (p < 0.05) under sludge bulking conditions. The biomass of Chilodonella spp., capable of eating filamentous bacteria, tended to decrease in both systems when sludge bulking occurred, showing that the abnormal growth of filamentous bacteria did not lead to a biomass bloom of this group of protists. On the other hand, the bactivorous protists represented more than 96% of total protist biomass, and the biomass of this group, particularly the attached ciliates, increased significantly (p < 0.05) when sludge bulking occurred. The significant increase of the attached ciliates may have possibly facilitated the growth of filamentous bacteria through selectively preying on non-filamentous bacteria and further exacerbated sludge bulking. The redundancy analysis and correlation analysis results showed that the biomass changes of the attached ciliates were primarily related to the sludge volume index and to some extent related to five-day biochemical oxygen demand loading and hydraulic retention time.     

废弃电路板湿法破碎能耗试验研究

采用Design-Expert 7.1软件对废弃电路板湿法冲击式破碎机能耗试验进行了方案设计和结果分析;拟合出了能耗与试验影响因素之间的定量关系模型,给出了能耗的残差分布以及不同操作变量之间的等高线和三维响应关系;利用Design-Expert 7.1对电路板破碎能耗试验的条件进行了优化,获得了最佳的操作指标。