The Southeastern Aerosol Research and Characterization Study: Part 1—Overview

Abstract

This paper presents an overview of a major, long-term program for tropospheric gas and aerosol research in the southeastern United States. Building on three existing ozone (O₃)-focused research sites begun in mid-1992, the Southeastern Aerosol Research and Characterization Study (SEARCH) was initiated in mid-1998 as a 7-year observation and research program with a broader focus including aerosols and an expanded geographical coverage in the Southeast. The monitoring network comprises four urban-rural (or urban-suburban) site pairs at locations along the coast of the Gulf of Mexico and inland, including two moderately sized and two major urban areas (Pensacola, FL; Gulfport, MS; Atlanta, GA; and Birmingham, AL). The sites are equipped with an extensive suite of instruments for measuring particulate matter (PM), gases relevant to secondary O₃ and the production of secondary aerosol particles, and surface meteorology. The measurements taken to date have added substantially to the knowledge about the temporal behavior and geographic variability of tropospheric aerosols in the Southeast. Details are presented in four papers to follow.     

Sexual reproduction in the corallimorpharian sea anemone Corynactis californica in a central California kelp forest

The seasonal cycle of sexual reproduction in the corallimorpharian sea anemone Corynactis californica (Calgren, 1936) was studied for 18 consecutive months (July 1987 to December 1988) at a subtidal area in the Hopkins Marine Refuge (HMLR), Pacific Grove, Monterey Bay, California. Samples were collected, histological sections were prepared, and gametocytes were examined and measured. C. californica grows by multiple or longitudianl fission to form single-sexed clones of various color and size. In female clones, oocytes appeared in late August and early September; they increased in size steadily in fall, and peaked in early December in both years. In male clones, spermatogenesis was synchronous with the female oogenic cycle, and motile sperm were observed in most testes in early December. Spawned gonads were found in both sexes from late November to early December. Spawning was induced in the laboratory in early December, and external fertilization was followed by development of free-swimming larvae. Gametogenesis and spawning are correlated with seasonal increases in seawater temperature and phytoplankton abundance, and we discuss and compare timing of sexual reproduction in this corallimorpharian to those in several actiniarian and scleractinian species.     

Quality assured measurements of animal building emissions: gas concentrations

Comprehensive field studies were initiated in 2002 to measure emissions of ammonia (NH3), hydrogen sulfide (H2S), carbon dioxide (CO2), methane (CH4), nonmethane hydrocarbons (NMHC), particulate matter <10 microm in diameter, and total suspended particulate from swine and poultry production buildings in the United States. This paper focuses on the quasicontinuous gas concentration measurement at multiple locations among paired barns in seven states. Documented principles, used in air pollution monitoring at industrial sources, were applied in developing quality assurance (QA) project plans for these studies. Air was sampled from multiple locations with each gas analyzed with one high quality commercial gas analyzer that was located in an environmentally controlled on-farm instrument shelter. A nominal 4 L/min gas sampling system was designed and constructed with Teflon wetted surfaces, bypass pumping, and sample line flow and pressure sensors. Three-way solenoids were used to automatically switch between multiple gas sampling lines with > or =10 min sampling intervals. Inside and outside gas sampling probes were between 10 and 115 m away from the analyzers. Analyzers used chemiluminescence, fluorescence, photoacoustic infrared, and photoionization detectors for NH3, H2S, CO2, CH4, and NMHC, respectively. Data were collected using personal computer-based data acquisition hardware and software. This paper discusses the methodology of gas concentration measurements and the unique challenges that livestock barns pose for achieving desired accuracy and precision, data representativeness, comparability and completeness, and instrument calibration and maintenance.     

Marine ecosystem modeling beyond the box: using GIS to study carbon fluxes in a coastal ecosystem

Studies of carbon fluxes in marine ecosystems are often done by using box model approaches with basin size boxes, or highly resolved 3D models, and an emphasis on the pelagic component of the ecosystem. Those approaches work well in the ocean proper, but can give rise to considerable problems when applied to coastal systems, because of the scale of certain ecological niches and the fact that benthic organisms are the dominant functional group of the ecosystem. In addition, 3D models require an extensive modeling effort. In this project, an intermediate approach based on a high resolution (20x20 m) GIS data-grid has been developed for the coastal ecosystem in the Laxemar area (Baltic Sea, Sweden) based on a number of different site investigations. The model has been developed in the context of a safety assessment project for a proposed nuclear waste repository, in which the fate of hypothetically released radionuclides from the planned repository is estimated. The assessment project requires not only a good understanding of the ecosystem dynamics at the site, but also quantification of stocks and flows of matter in the system. The data-grid was then used to set up a carbon budget describing the spatial distribution of biomass, primary production, net ecosystem production and thus where carbon sinks and sources are located in the area. From these results, it was clear that there was a large variation in ecosystem characteristics within the basins and, on a larger scale, that the inner areas are net producing and the outer areas net respiring, even in shallow phytobenthic communities. Benthic processes had a similar or larger influence on carbon fluxes as advective processes in inner areas, whereas the opposite appears to be true in the outer basins. As many radionuclides are expected to follow the pathways of organic matter in the environment, these findings enhance our abilities to realistically describe and predict their fate in the ecosystem.     

Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications

Increased environmental awareness and interest in long-term sustainability of material resources has motivated considerable advancements in composite materials made from natural fibers and resins, or biocomposites. In spite of these developments the lower stiffness and strength of biocomposites has limited their applications to non-load-bearing components. This paper presents an overview of a study aimed at showing that the shortcomings of biocomposites can be overcome through hybrid material designs and efficient structural configurations to make them suitable for load bearing structural components. Hybrid blends of natural and synthetic fibers can significantly improve the characteristics of biocomposites with minimal cost and environmental impact, and hierarchical cellular designs can maximize material efficiency in structural components. Periodic and hierarchical cellular plate designs made from natural fibers and unsaturated polyester resin were evaluated experimentally and analytically. Stiffness, strength, and dimensional stability of all-biocomposite and hybrid natural–synthetic material systems were evaluated through material tests while structural performance of cellular plate designs was assessed through flexural tests on laboratory-scale samples. The experimental results were correlated with analytical models for short-fiber composites and cellular structures. The results showed that biocomposites have adequate short-term performance and that they can efficiently compete with housing panels made from conventional structural materials.     

Geochemical fractions of copper in soil chronosequences of selected European floodplains

The influence of soil formation on copper sorption is documented based on chronosequences of soils from three river floodplains in Europe (Danube, Ebro and Elbe). Sequential extraction was used to fractionate copper in original and spiked soils in order to study the long-term and short-term behaviour of copper retention. Copper partitioning among defined geochemical fractions was mainly determined by soil pH and the contents of carbonates, organic matter and Fe-/Mn-oxides and hydroxides. Copper extracted with NH(2)OH.HCl correlated well with the contents of crystalline Fe-oxides and hydroxides, demonstrating increasing retention capacity with progressing soil development. Copper retained in original soils was found in more strongly bound fractions, whereas sorption of freshly added copper was primarily influenced by the presence of carbonates. Beyond the effect of progressing soil formation, variations in organic carbon contents due to different land use history affected the copper retention capacity of the investigated soils.     

Variability of catechin and 4-hydroxyacetophenone distribution in Norway spruce needles in relation to their position, age, and growing conditions

The amount of catechin and 4-hydroxyacetophenone in the methanolic extract of the Norway spruce needles at the locality Bíly Kríz (Moravian-Silesian Beskydy Mts.) was found in the range 2.8-12.1 mg g(-1) (dry weight) and 0.2-17.7 mg g(-1) (dry weight), respectively. Total amount of catechin (sum of the last three needle year-classes) is statistically higher (p<0.01) in the sparse areas compared to the dense ones and similar trends were recorded for catechin content in current and one-year-old needles. These results may support an idea about primary control of phenolic production by the incident solar radiation, which depends on the social position of the tree and canopy closure degree.     

Use of hydrophilic and hydrophobic microfiltration membranes to remove microorganisms and organic pollutants from primary effluents.

Primary-effluent wastewater from the Allegheny County Sanitary Authority (Pennsylvania) was used as a surrogate for combined-sewer-overflow waters contained in the sewershed. Pathogens contained in combined-primary-effluent wastewaters or combined-sewer overflows (CSOs) may pose a human-health threat to those coming in contact with such receiving waters. Polymeric ultra- and nano-membranes can be used to capture these microorganisms from CSOs. This research investigates the ability of polymeric hydrophobic and hydrophilic membranes, ranging in pore size from 0.2 to 0.8 microm, to remove pathogen-indicator organisms (Escherichia coli, enterococcus, and fecal coliforms). Membranes, with pore size 0.45 microm and smaller, were able to reduce the bacteria levels to nondetectable levels, with the sole exception of one membrane with pore size 0.3 microm.