鄱阳湖湿地植物生态系统结构及湖水位对其影响研究

通过对鄱阳湖水文过程和湖盆地形特点的分析,利用3S技术对鄱阳湖湿地进行了分类,研究了各种类型湿地植物生态系统的生境、主要植物群落结构和分布规律。结果表明,鄱阳湖湿地植物生态系统结构复杂,生物多样性极其丰富。湿地植物是以根茎为主要繁殖器官的克隆繁殖植物,以集群分布为主要特点。在宏观尺度上受地形高程、湖水位和洲滩出露时间制约,不同植物群落沿水分梯度分布;在景观尺度上受到土壤含水量、地下水埋深和土壤结构影响,形成水平镶嵌结构;微观尺度上还与微地形和土壤养分密切相关,部分区域表现为复合体结构。湿地植被对水分梯度的敏感性,导致湿地植物生态系统的易变性和脆弱性。近年来,鄱阳湖水位过低且持续时间长,使生态系统遭受一定损害。     

基于GIS和USLE的小流域土壤侵蚀定量评价

通过气象数据分析、实地调查、野外采样及室内分析、DEM计算、遥感解译等,建立了南水北调中线水源地丹江口水库区典型小流域地理数据库,确定了计算USLE因子指标的方法。在ArcGIS支持下,模拟了小流域土壤侵蚀强度的空间分布。将模拟结果分为微度、低度、中度、强度、剧烈侵蚀5级,建立土壤侵蚀与土地利用/土地覆盖类型及坡度之间的关系。结果表明：研究区年均土壤侵蚀量2414 t/hm2,远超该地区容许土壤流失量5 t/（hm2·a）。96%的侵蚀区及95%的土壤侵蚀总量位于<25°区域。就土地利用/土地覆盖类型而言,陡坡耕作区是主要的土壤流失区。研究结果为水源区的土壤侵蚀治理提供参考意见,同时为USLE在无土壤类型图地区的应用提供一种方法借鉴     

滇池流域水资源综合平衡管理研究

随着滇池治理的进展,在今后一个时期内,恢复滇池饮用水环境功能,成为滇池治理的首要目标和任务。围绕滇池流域水资源供求平衡,采用水资源全要素配置框架下的三次平衡分析理论,从整体上分析了滇池流域水资源供求平衡关系及存在的主要问题,提出了以需求为导向,建立滇池流域水资源综合平衡管理目标和措施。分析表明：在滇池治理的基础上,通过建立滇池流域水资源综合平衡管理体系,落实管理措施,从总量平衡的理论上能够充分发挥引水工程的作用,恢复滇池饮用水环境功能,实现水量、水质供求的综合平衡。建议进一步开展量化分析和模拟实验研究,为在滇池流域实施综合平衡管理提供可靠依据和建议     

灌溉和降雨条件下生态沟渠氮、磷输出特征研究

为了研究长沙县金井河流域农业源头生态沟渠氮和磷的输出特征,对灌溉和降雨条件下及不同季节生态沟渠水体氮、磷的变化特征进行监测研究。研究结果表明：灌溉和降雨期间,生态沟渠中总氮的输出最大值为270 mg/L,其输出的主要形态为氨态氮和硝态氮,总磷的最大值达032 mg/L。灌溉后,生态沟渠氮、磷的输出均呈单调递减变化,在灌溉初期均最高。降雨后,总氮、总磷沿程变化趋势均呈递减变化;生态沟渠对水体总氮、总磷去除率分别达64%、70%;各断面氮、磷的输出随着时间的增加呈先增加后降低的趋势,其中总氮、氨态氮含量在雨后第3 d达到最高,总磷含量在雨后第2 d达到最高。在不同季节中水体氮、磷的变化以冬季总氮、氨态氮和磷浓度最高     

河床演变影响下桥区水域通航安全研究

为了科学地设定滩槽易变河段处的桥梁跨径布置方案,针对荆州长江大桥桥区水域河床演变影响通航安全的问题,采用实例调研及历史资料分析的方法,指出滩槽易变河段选址建设的桥梁,其最大风险是滩槽移位导致船舶从通航孔位置移动到非通航孔位置,提出新建桥梁通航孔布置应覆盖深泓和可能成为航道的深槽的摆动范围;根据提出的原则研究拟建的李埠桥...     

Using air quality modeling to study source–receptor relationships between nitrogen oxides emissions and ozone exposures over the United States

Human exposure to ambient ozone (O₃) has been linked to a variety of adverse health effects. The ozone level at a location is contributed by local production, regional transport, and background ozone. This study combines detailed emission inventory, air quality modeling, and census data to investigate the source–receptor relationships between nitrogen oxides (NO_x) emissions and population exposure to ambient O₃ in 48 states over the continental United States. By removing NO_x emissions from each state one at a time, we calculate the change in O₃ exposures by examining the difference between the base and the sensitivity simulations. Based on the 49 simulations, we construct state-level and census region-level source–receptor matrices describing the relationships among these states/regions. We find that, for 43 receptor states, cumulative NO_x emissions from upwind states contribute more to O₃ exposures than the state's own emissions. In-state emissions are responsible for less than 15% of O₃ exposures in 90% of U.S. states. A state's NO_x emissions can influence 2 to 40 downwind states by at least a 0.1 ppbv change in population-averaged O₃ exposure. The results suggest that the U.S. generally needs a regional strategy to effectively reduce O₃ exposures. But the current regional emission control program in the U.S. is a cap-and-trade program that assumes the marginal damage of every ton of NO_x is equal. In this study, the average O₃ exposures caused by one ton of NO_x emissions ranges from ? 2.0 to 2.3 ppm-people-hours depending on the state. The actual damage caused by one ton of NO_x emissions varies considerably over space.     

A validated 2-D diffusion–advection model for prediction of drift from ground boom sprayers

Correct field drift prediction is a key element in environmental risk assessment of spraying applications. A reduced order drift prediction model based on the diffusion–advection equation is presented. It allows fast assessment of the drift potential of specific ground boom applications under specific environmental wind conditions that obey the logarithmic wind profile. The model was calibrated based on simulations with a validated Computational Fluid Dynamics (CFD) model. Validation of both models against 38 carefully conducted field experiments is successfully performed for distances up to 20 m from the field edge, for spraying on flat pasture land. The reduced order model succeeded in correct drift predictions for different nozzle types, wind velocities, boom heights and spray pressures. It used 4 parameters representing the physical aspects of the drift cloud; the height of the cloud at the field edge, the mass flux crossing the field edge, the settling velocity of the droplets and the turbulence. For the parameter set and range considered, it is demonstrated for the first time that the effect of the droplet diameter distribution of the different nozzle types on the amount of deposition spray drift can be evaluated by a single parameter, i.e., the volume fraction of droplets with a diameter smaller than 191 μm. The reduced order model can be solved more than 4 orders of magnitude faster than the comprehensive CFD model.     

微波萃取肉类样品中的多氯联苯方法研究

用丙酮和正己烷（1＋1）的混合溶剂做萃取剂,采用微波萃取的方法提取动物肉类中的9个多氯联苯（PCBs）单体,通过弗罗里硅土和氧化铝净化后,在带ECD检测器的气相色谱上测定。取样量为2g时,多氯联苯（PCBs）在GC—ECD上响应的线性范围为11～100ng／g,研究的样品加标测定范围为11—500ng／g,检出限从5．3—13．3ng／g,平均加标回收率在98．7％-118％。     

Characterization of aluminium-based water treatment residual for potential phosphorus removal in engineered wetlands

Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed Al-WTR as potential phosphate-removing substrate in engineered wetlands. Results indicate specific surface area ranged from 28.0 m² g⁻¹ to 41.4 m² g⁻¹. X-ray Diffraction, Fourier transform infrared and energy-dispersive X-ray spectroscopes all indicate Al-WTR is mainly composed of amorphous aluminium which influences its phosphorus (P) adsorption capacity. The pH and electrical conductivity ranged from 5.9 to 6.0 and 0.104 dS m⁻¹ to 0.140 dS m⁻¹ respectively, showing that it should support plant growth. Batch tests showed adsorption maxima of 31.9 mg P g⁻¹ and significant P removal was achieved in column tests. Overall, results showed that Al-WTR can be used for P removal in engineered wetlands and it carries the benefits of reuse of a by-product that promotes sustainability.     

液-固流化床回收印刷线路板中金属的研究

根据废弃印刷线路板中材料密度不同,采用水介质流化床对印刷线路板粉末中的金属进行回收,对0.25～0.177、0.177～0.104、0.104～0.074和-0.074 mm 4个粒级范围内的物料进行分选试验。试验结果表明,在上述4个粒级范围内,随介质流速的增大,金属回收率降低;金属回收率η与实际操作速度（ua）和颗粒终端沉降速度（ut）的比值φ（ua/ut）存在一定线性关系,分析模拟了η与φ之间的相关性方程,外推试验的结果证明了相关性方程的可靠性;在合适的操作条件下,各粒级范围内金属的回收率分别为95.02%、90.07%、87.5%和92.68%。