Validation of a Lagrangian dispersion model implementing different kernel methods for density reconstruction

In this paper the inert version of a Lagrangian particle model named photochemical Lagrangian particle model (PLPM) is described and validated. PLPM implements four density reconstruction algorithms based on the kernel density estimator. All these methods are fully grid-free but they differ each other in considering local or global features of the particles distribution, in treating the Cartesian directions separately or together and in being based on receptors or particles positions in space. Each kernel has been shown to have both advantages and disadvantages, but the overall good performances of the model when compared with the well known Copenhagen and Kincaid data sets are very encouraging in view of its extension to fully chemically active simulations, currently under development.     

DMSO EVOL™ as novel non-toxic solvent for polyethersulfone membrane preparation

Environmental Science and Pollution Research - The possibility of replacing traditional toxic solvents normally employed during the preparation of polymeric membranes with greener alternatives...     

Sugarcane vinasse: Environmental implications of its use

The inadequate and indiscriminate disposal of sugarcane vinasse in soils and water bodies has received much attention since decades ago, due to environmental problems associated to this practice. Vinasse is the final by-product of the biomass distillation, mainly for the production of ethanol, from sugar crops (beet and sugarcane), starch crops (corn, wheat, rice, and cassava), or cellulosic material (harvesting crop residues, sugarcane bagasse, and wood). Because of the large quantities of vinasse produced, alternative treatments and uses have been developed, such as recycling of vinasse in fermentation, fertirrigation, concentration by evaporation, and yeast and energy production. This review was aimed at examining the available data on the subject as a contribution to update the information on sugarcane vinasse, from its characteristics and chemical composition to alternatives uses in Brazil: fertirrigation, concentration by evaporation, energy production; the effects on soil physical, chemical and biological properties; its influence on seed germination, its use as biostimulant and environmental contaminant. The low pH, electric conductivity, and chemical elements present in sugarcane vinasse may cause changes in the chemical and physical–chemical properties of soils, rivers, and lakes with frequent discharges over a long period of time, and also have adverse effects on agricultural soils and biota in general. Thus, new studies and green methods need to be developed aiming at sugarcane vinasse recycling and disposal.     

Sulphur mineralization kinetics of cattle manure and green waste compost in soils.

Sulphur mineralization of cattle manure (CM) and green waste compost (GWC) added to six agricultural soils with different chemical properties was monitored over 10 weeks in a laboratory incubation experiment. Although the amount of sulphur was higher in CM than in GWC, the cumulative SO4(2-)-S values in GWC-treated soils were higher than in soil amended with CM. The percentages of mineralized S were always higher in GWC-treated soil (in the range 1.3-8.5%) than in CM-treated soil (in the range 0.9-3.8%). In three of the six soils, particularly for CM, an immobilization of sulphur was observed. Three kinetic models were evaluated for their suitability to describe the mineralization process. The first-order model best described S mineralization for both amended and control soils. The GWC substantially increased the amount of potentially mineralizable S (S0) relative to the controls. In GWC-treated soils, the rates of S mineralization (k) were higher than rates in the controls. The k of CM-amended soils was often lower than the k of control soils. Parameters derived from the model were tested as indices for assessing the relationships between S mineralization and soil characteristics. The S0 was positively correlated to the amount of cumulative SO4(2-)-S and also to the content of organic C, N and S in soil.     

Mercury volatilisation and phytoextraction from base-metal mine tailings

Experiments were carried out in plant growth chambers and in the field to investigate plant-mercury accumulation and volatilisation in the presence of thiosulphate (S2O3)-containing solutions. Brassica juncea (Indian mustard) plants grown in Hg-contaminated Tui mine tailings (New Zealand) were enclosed in gastight volatilisation chambers to investigate the effect of ammonium thiosulphate ([NH4]2 S2O3) on the plant-Hg volatilisation process. Application of (NH4)2 S2O3 to substrates increased up to 6 times the Hg concentration in shoots and roots of B. juncea relative to controls. Volatilisation rates were significantly higher in plants irrigated only with water (control) when compared to plants treated with (NH4)2 S2O3. Volatilisation from barren pots (without plants) indicated that Hg in tailings is subject to biological and photochemical reactions. Addition of sodium thiosulphate (Na2S2O3) at 5 g/kg of substrate to B. juncea plants grown at the Tui mine site confirmed the plant growth chambers studies showing the effectiveness of thio-solutions at enhancing shoot Hg concentrations. Mercury extraction from the field plots yielded a maximum value of 25 g/ha. Mass balance studies revealed that volatilisation is a dominant pathway for Hg removal from the Tui mine site. A preliminary assessment of the risks of volatilisation indicated that enhanced Hg emissions by plants would not harm the local population and the regional environment.     

A review of selection‐based tests of abiotic surrogates for species representation

Because conservation planners typically lack data on where species occur, environmental surrogates—including geophysical settings and climate types—have been used to prioritize sites within a planning area. We reviewed 622 evaluations of the effectiveness of abiotic surrogates in representing species in 19 study areas. Sites selected using abiotic surrogates represented more species than an equal number of randomly selected sites in 43% of tests (55% for plants) and on average improved on random selection of sites by about 8% (21% for plants). Environmental diversity (ED) (42% median improvement on random selection) and biotically informed clusters showed promising results and merit additional testing. We suggest 4 ways to improve performance of abiotic surrogates. First, analysts should consider a broad spectrum of candidate variables to define surrogates, including rarely used variables related to geographic separation, distance from coast, hydrology, and within‐site abiotic diversity. Second, abiotic surrogates should be defined at fine thematic resolution. Third, sites (the landscape units prioritized within a planning area) should be small enough to ensure that surrogates reflect species’ environments and to produce prioritizations that match the spatial resolution of conservation decisions. Fourth, if species inventories are available for some planning units, planners should define surrogates based on the abiotic variables that most influence species turnover in the planning area. Although species inventories increase the cost of using abiotic surrogates, a modest number of inventories could provide the data needed to select variables and evaluate surrogates. Additional tests of nonclimate abiotic surrogates are needed to evaluate the utility of conserving nature's stage as a strategy for conservation planning in the face of climate change.     

Using abiotic variables to predict importance of sites for species representation

In systematic conservation planning, species distribution data for all sites in a planning area are used to prioritize each site in terms of the site's importance toward meeting the goal of species representation. But comprehensive species data are not available in most planning areas and would be expensive to acquire. As a shortcut, ecologists use surrogates, such as occurrences of birds or another well‐surveyed taxon, or land types defined from remotely sensed data, in the hope that sites that represent the surrogates also represent biodiversity. Unfortunately, surrogates have not performed reliably. We propose a new type of surrogate, predicted importance, that can be developed from species data for a q% subset of sites. With species data from this subset of sites, importance can be modeled as a function of abiotic variables available at no charge for all terrestrial areas on Earth. Predicted importance can then be used as a surrogate to prioritize all sites. We tested this surrogate with 8 sets of species data. For each data set, we used a q% subset of sites to model importance as a function of abiotic variables, used the resulting function to predict importance for all sites, and evaluated the number of species in the sites with highest predicted importance. Sites with the highest predicted importance represented species efficiently for all data sets when q = 25% and for 7 of 8 data sets when q = 20%. Predicted importance requires less survey effort than direct selection for species representation and meets representation goals well compared with other surrogates currently in use. This less expensive surrogate may be useful in those areas of the world that need it most, namely tropical regions with the highest biodiversity, greatest biodiversity loss, most severe lack of inventory data, and poorly developed protected area networks.     

Factors inducing the intense burrowing activity of the red-swamp crayfish,<Emphasis Type="Italic"> Procambarus clarkii</Emphasis>, an invasive species

The burrowing activity of the invasive red-swamp crayfish, Procambarus clarkii, was studied along a 25-m-long transect in an irrigation ditch system in Italy. Our objective was to understand the factors inducing this species intense digging, which can result in bank collapse and consequently in severe damage to both agricultural fields and natural ecosystems. Burrow morphology and position, together with their occupancy by crayfish and digging, were recorded once every 6 h for 10 consecutive days. The majority of burrows were simple, although a few had a chimney and were constructed at a farther distance from the water surface than simple burrows. Burrow occupancy and digging, together with their plugged/unplugged status, were constant throughout a 24-h cycle and were not related to any abiotic parameter of the habitat. Crayfish occupied and dug a burrow for a relatively short time (6 h on average). Once abandoned, old burrows were rarely reoccupied and often collapsed, while crayfish excavated new ones. As a result, the overall number of burrows increased. This massive use of banks by P. clarkii seems to be related to soil composition and humidity, which favour crayfish digging but also cause the easy collapse of burrows.     

The effects of heavy metal contamination on the soil arthropod community of a shooting range

Soils in clay pigeon shooting ranges can be seriously contaminated by heavy metals. The pellets contained in ammunition are composed of Pb, Sb, Ni, Zn, Mn and Cu. The total concentrations of these metals in soils, and the effects of their increasing levels on the arthropod community were investigated at seven sampling sites in a clay pigeon shooting range and compared with two controls. Research revealed that the spatial distribution of Pb and Sb contamination in the shot-fall area was strongly correlated with the flight path of the pellets. Ordination obtained through Redundance Analysis showed that Collembola, Protura and Diplura were positively correlated with major detected contaminants (Pb, Sb), while Symphyla showed a negative correlation with these pollutants. Determination of the soluble lead fraction in soil, and of its bioaccumulation in the saprophagous Armadillidium sordidum (Isopoda) and the predator Ocypus olens (Coleoptera), showed that a significant portion of metallic Pb from spent pellets is bioavailable in the soil and can be bioaccumulated by edaphic organisms, entering the soil trophic network, but without biomagnification.     

Occurrence of PCDD/Fs in urban air before and after the ban of leaded gasoline

The source of PCDDs and PCDFs in automotive exhaust is not yet fully explained. The chlorinated hydrocarbons used in the formulation of lead-alkyl additives were suspected as a possible major source. Based on this, the decreasing use of leaded gasoline followed by its final ban (occurred on 1/1/2002, in Italy) should have resulted in a decreasing presence of PCDD/Fs in urban air and possibly some differences in their profile. To investigate these aspects, we monitored PCDD/Fs for one year starting in September 2001, at a medium-traffic road site in Rome, with weekly frequency. Results were then compared with those obtained in a previous study performed before the ban (from February 2000 to January 2001) at the same site. As compared with the previous study, the yearly-averaged overall PCDD/F concentration, as toxic equivalent of 2,3,7,8-TCDD, decreased from 60 to 50 fg m(-3) I-TEQ; it remained unchanged, however, if one sample with a particularly high PCDD/F content was excluded from each data set. The monthly trend confirmed the one found in the former study. On an annual basis, the two mean congener profiles were almost identical. The concentration levels and the constancy of profiles, as calculated for the two periods, do not support the hypothesis of a major role of leaded gasoline, substantially different from unleaded one, in contributing to PCDD/F air pollution.