Assessment and prediction of the impacts of the Ok Tedi copper mine on fish catches in the Fly River system,Papua New Guinea

The Ok Tedi copper mine discharges overburden and ore residues into the Ok Tedi, a tributary of the Fly River. These discharges result in elevated suspended solids and dissolved and particulate associated copper. Analyses of covariance were performed to establish statistical model of the relationships between the mine discharges and fish catches between 1983 and 1988. These models were then extrapolated to predict the affects of future mine discharges on fish catches. The models predicted that if the observed effects were caused by particulate associated copper, the period of greatest impact will be between 1989 and 1993, following which catches should be close to 1988 levels for the remainder of mine life. Some additional catches not included in the data set used to derive the models were found to fit the model predictions well. As the predicted period of greatest impact is short and most species reproduce away from the river channel, the ability of the fish communities to undergo partial recovery after 1991 should be maintained.     

Emissions of organic compounds from produced water ponds II: Evaluation of flux chamber measurements with inverse-modeling techniques

In this study, the authors apply two different dispersion models to evaluate flux chamber measurements of emissions of 58 organic compounds, including C2–C11 hydrocarbons and methanol, ethanol, and isopropanol from oil- and gas-produced water ponds in the Uintah Basin. Field measurement campaigns using the flux chamber technique were performed at a limited number of produced water ponds in the basin throughout 2013–2016. Inverse-modeling results showed significantly higher emissions than were measured by the flux chamber. Discrepancies between the two methods vary across hydrocarbon compounds and are largest in alcohols due to their physical chemistries. This finding, in combination with findings in a related study using the WATER9 wastewater emission model, suggests that the flux chamber technique may underestimate organic compound emissions, especially alcohols, due to its limited coverage of the pond area and alteration of environmental conditions, especially wind speed. Comparisons of inverse-model estimations with flux chamber measurements varied significantly with the complexity of pond facilities and geometries. Both model results and flux chamber measurements suggest significant contributions from produced water ponds to total organic compound emission from oil and gas productions in the basin.

Implications: This research is a component of an extensive study that showed significant amount of hydrocarbon emissions from produced water ponds in the Uintah Basin, Utah. Such findings have important meanings to air quality management agencies in developing control strategies for air pollution in oil and gas fields, especially for the Uintah Basin in which ozone pollutions frequently occurred in winter seasons.     

Correction to: Documenting lemming population change in the Arctic: Can we detect trends?

Ambio - In the original published article, some of the symbols in figure 1A were modified incorrectly during the typesetting and publication process. The correct version of the figure is provided...     

Multiphase flow and transport caused by spontaneous gas phase growth in the presence of dense non-aqueous phase liquid

Disconnected bubbles or ganglia of trapped gas may occur below the top of the capillary fringe through a number of mechanisms. In the presence of dense non-aqueous phase liquid (DNAPL), the disconnected gas phase experiences mass transfer of dissolved gases, including volatile components from the DNAPL. The properties of the gas phase interface can also change. This work shows for the first time that when seed gas bubbles exist spontaneous gas phase growth can be expected to occur and can significantly affect water-gas-DNAPL distributions, fluid flow, and mass transfer. Source zone behaviour was observed in three different experiments performed in a 2-dimensional flow cell. In each case, a DNAPL pool was created in a zone of larger glass beads over smaller glass beads, which served as a capillary barrier. In one experiment effluent water samples were analyzed to determine the vertical concentration profile of the plume above the pool. The experiments effectively demonstrated a) a cycle of spontaneous gas phase expansion and vertical advective mobilization of gas bubbles and ganglia above the DNAPL source zone, b) DNAPL redistribution caused by gas phase growth and mobilization, and c) that these processes can significantly affect mass transport from a NAPL source zone.     

An improved extraction method to determine the initial emittable concentration and the partition coefficient of VOCs in dry building materials

Based on the extraction method presented by Smith et al. (2008), this paper proposes an improved method, the multi-emission/flush regression method, to simultaneously determine the initial emittable concentration and the partition coefficient. Compared to the extraction method, the proposed method has the following advantages: (1) it is unnecessary for the target volatile organic compounds (VOCs) to emit completely from the material, thus greatly reducing experimental time; (2) it provides a simpler way to obtain the partition coefficients of VOCs for tested materials and can avoid the measurement uncertainties at low VOC concentrations which often occur during the last few cycles of the extraction method; (3) it does not require grinding the building material into powders thus making this method more convenient to use. Comparisons were made between the initial emittable VOC concentrations determined by the original extraction method and the proposed method. Results show good agreements between these two methods. To further validate the proposed method, the type of static chamber developed by Wang et al. (2006) was used to conduct the experiment for a type of medium density board, and formaldehyde was selected as the target compound. Based on the initial emittable concentration and partition coefficient obtained using the proposed method, and the diffusion coefficient obtained by the mercury intruding porosimetry, the chamber formaldehyde concentration was predicted and compared with the experimental measurements. Results show that the predicted chamber VOC concentration using the measured parameters agree well with the experimental data.     

Volatilization rates of intermediate and low volatility chemicals from water

This paper reports laboratory methods for measuring the gas and liquid phase mass transfer coefficients and volatilization rate constants of intermediate and low volatility compounds and proposes a method for calculating the volatilization rate constants of these types of compounds in the environment.     

The effect of thallium on the growth of Lemna minor and plant tissue concentrations in relation to both exposure and toxicity

The effect of thallium on frond production and the rates of increase in surface area and fresh weight in Lemna minor were examined in terms of concentrations of the element in the growth medium and in the plant. The toxicity indices, EC(50) and threshold concentration, indicate that curtailment of frond expansion occurs at a lower thallium exposure than inhibition of frond multiplication. Production of smaller fronds, rather than chlorosis, was the most notable initial response to thallium stress and, below the threshold of toxicity, enhanced multiplication rates were recorded. Subsequent recovery in thallium-free medium was significant in the region of EC(50) exposures and below, but very little recovery occurred at higher exposures. Lemna minor has a remarkable capacity to accumulate thallium, and accumulation factors of 88 x 10(3) at low exposures, and 6 x 10(3) at high exposures, were recorded, which would suggest some form of active uptake.     

Carbon emissions and management scenarios for consumer-owned utilities

An important subset of the utility sector has been scarcely explored for its ability to reduce carbon dioxide emissions: consumer-owned electric utilities significantly contribute to U.S. greenhouse gas emissions, but are often excluded from energy efficiency and renewable energy policies. They sell a quarter of the nation's electricity, yet the carbon impact of these sales is not well understood, due to their small size, unique ownership models, and high percentage of purchased power for distribution. This paper situates consumer-owned utilities in the context of emerging U.S. climate policy, quantifying for the first time the state-by-state carbon impact of electricity sales by consumer-owned utilities. We estimate that total retail sales by consumer-owned utilities account for roughly 568 million metric tons of CO₂ annually, making this sector the 7th largest CO₂ emitter globally, and examine state-level carbon intensities of the sector in light of the current policy environment and the share of COU distribution in the states. Based on efficiency and fuel mix pathways under conceivable regulations, carbon scenarios for 2030 are developed.     

Determining effective interfacial tension and predicting finger spacing for DNAPL penetration into water-saturated porous media

The difficulty in determining the effective interfacial tension limits the prediction of the wavelength of fingering of immiscible fluids in porous media. A method to estimate the effective interfacial tension using fractal concepts was presented by Chang et al. [Water Resour. Res. 30 (1994) 125]. We modified the method in that the macroscopic interface length was used instead of the system width. Methods to determine the macroscopic and the microscopic interface length are given. Lab experiments of dense nonaqueous phase liquid (DNAPL) penetrating into water-saturated glass beads were carried out in a two-dimensional (2-D) transparent chamber. The displacement processes were recorded using a 35-mm camera or a video camera, which was directly connected to and controlled by a computer. Unlike the method of Chang et al. (1994), the modified method used here gives a constant value of the effective interfacial tension over time. The predicted wavelengths of fingering are relatively close to those observed except for the fine beads.