Vorschl?ge zur Charakterisierung und quantifizierung pfadübergreifender Schadstoffexpositionen

Zusammenfassung  Um zu einer sachgerechten und nachvollziehbar quantifizierbaren Beurteilung der m?glichen Gesundheitsbelastungen des Menschen durch Schadstoffe zu gelangen, ist es von grundlegender Bedeutung dessen ?u?ere Schadstoffexposition absch?tzen zu k?nnen. Um die Durchführung derartiger Absch?tzungen zu erm?glichen, werden nutzergruppen- und expositionsszenariospezifisch orale, inhalative und dermale Aufnahmeraten für die Kontaktmedien Boden, Pflanzen aus Haus- und Schreberg?rten, Trinkwasser, Staub, Hausstaub und Innenraumluft vorgeschlagen. Diese Aufnahmeraten dienen, gemeinsam mit gemessenen oder berechneten Schadstoffkonzentrationen in den entsprechenden Kontaktmedien, zur Absch?tzung der von Menschen aufgenommenen Schadstoffdosen und erm?glichen durch einen Vergleich mit tolerierbaren Schadstoffdosen eine stoff-, nutzungs- und standortbezogene Beurteilung von Schadstoffexpositionen, auch für komplexe Nutzungen.      

Design parameters for coastal dikes

This paper presents results of the assessment of the design parameters leading to the definition of the crest level of a coastal dike along the German North Sea. Procedures to estimate the design water level have been proposed, distinguishing between comparative and single value procedures. The transformation of the wave characteristics from deep water towards the shallow foreshore was achieved through the application of a spectral wave model. To improve the wave parameter estimations, the existing model was nested to a grid with a higher resolution closer to the coast. The estimation of the wave run-up followed the Dutch procedure with some adjustments to the local wave characteristics and dike geometry. The computed maximum crest level of 8.4 m is below the crest height of the existing dike, which is 8.8 m. However a proposal for a more economical design should be carefully evaluated, paying attention to the uncertainties encountered in this research. The general recommendation is to enhance the reliability of the hindcasted wave parameters through calibration and validation of the wave model and to include in the design process an investigation of the effect of the medium term morphological developments.     

Local genetic structure and relatedness in a solitary mammal, Neotoma fuscipes

We used DNA microsatellites to investigate temporal and spatial patterns of local genetic differentiation and relatedness in a solitary mammal, the dusky-footed woodrat (Neotoma fuscipes). Patterns of genetic variation were measured relative to spatial clusters, or neighborhoods, of woodrats. We detected significant genetic differentiation among woodrat neighborhoods in two populations spanning multiple habitat types and densities. Estimates of θ _ST among neighborhoods ranged 0.034–0.075 and were comparable to levels reported in social mammals. Genetic differentiation at such a local scale is noteworthy because it occurred in the absence of any physical barriers to gene flow, suggesting that the patterns observed are linked to the nonrandom patterns of mating and dispersal that characterize woodrat social structure. Genetic differentiation and relatedness among neighborhoods were even higher when only resident females were analyzed. These results are consistent with a pattern of female philopatry and male-biased dispersal in woodrats. Geographic distance and relatedness were inversely correlated in adult females at intermediate densities, but not at low densities. Nonetheless, matrilineal genetic structure was apparent even at low woodrat densities based on estimates of θ _ST among neighborhoods of resident females that were significantly greater than zero and consistently greater than estimates including all individuals. In summary, this study demonstrates a matrilineal genetic structure in dusky-footed woodrats. In addition, our results support the idea that intermediate densities may be better at facilitating the formation of spatial kin clusters than either extreme. An erratum to this article can be found at     

Attributional conflict between managers and subordinates: An investigation of leader-member exchange effects

The present study investigated the discrepancies, or conflict, between the attributions of leaders and members as a function of LMX quality and explored the relation between attributional conflict and subordinate job satisfaction, perceptions of equity, and turnover intentions. Data for the study were provided by 141 supervisor-subordinate dyads from the managerial ranks of a large manufacturing organization. Both parties of the dyad made attributions for subordinate loyalty, affect, and contributions, member behaviors identified as critical in previous LMX research. Limited support emerged for the hypothesis that attributional conflict would be greater in dyads where subordinates reported lower rather than higher LMX quality. Findings suggested that attributional discrepencies are due, in part, to the tendency of leaders to make more favorable attributions for subordinates reporting higher LMX quality than for subordinates reporting lower LMX quality. Results also revealed that, while attributional conflict was negatively related to subordinate satisfaction and perceptions of equity and positively related to turnover intentions, attributional conflict did not predict subordinate work outcomes when the effects of LMX quality were controlled. Implications of these findings were discussed.     

Perfluorierte Tenside (PFT) in der aquatischen Umwelt und im Trinkwasser

Recent scientific research on perfluorinated surfactants (PS) revealed their ocurrence in German surface and drinking waters (Skutlarek, Exner, Färber 2006). Since several years, PS have been found in the global environment, especially in animal and human tissues. PS possess extreme persistence against microbiological and chemical degradation and are able to bioaccumulate in animals and humans (Houde et al. 2006). PS concentrations (sum of 12 components) in the Rhine river and its main tributaries were determined below 100 ng/L, but the rivers Ruhr (tributary of the Rhine) and Möhne (tributary of the Ruhr) showed remarkable high concentrations (Ruhr: up to 446 ng/L, Möhne: up to 4385 ng/L). The maximum concentration in drinking waters was 598 ng/L with the major component perfluorooctanoic acid (PFOA). The PS concentrations decreased similarly to the PS concentrations of the raw waters along the flow direction of the Ruhr river. Therefore it seems to be necessary to install legal regulations for these compounds.     

On the economics of energy labels in the housing market

Energy efficiency in the residential housing market can play an important role in the reduction of global carbon emissions. This paper reports the first evidence on the market adoption and economic implications of energy performance certificates implemented by the European Union. The results show that adoption rates are low and declining over time, coinciding with a negative sentiment regarding the label in the popular media. Labels are clustered among smaller, post-war homes in neighborhoods with more difficult selling conditions. We also document that geographic variation in the adoption rate of energy labels is positively related to the fraction of “green” voters during the 2006 national elections. Within the sample of labeled homes, the energy label creates transparency in the energy efficiency of dwellings. Our analysis shows that consumers capitalize this information into the price of their prospective homes.     

Estimation of plant protection product application dates for environmental fate modeling based on phenological stages of crops

According to the EU directive 91/414/EEC potential environmental concentrations of pesticides have to be assessed with environmental fate models. For the calculation of pesticide concentrations it is necessary to provide an application date which has to match the specific Biologische Bundesanstalt, Bundesamt, Chemische Industrie (BBCH) stage at which the pesticide shall be applied. If these application dates are not available for a specific stage, crop and country they must be estimated, which adds an additional uncertainty to the predicted concentrations. In the present study, we therefore evaluate to which extent application dates can be derived from phenological data. For this analysis phenological data, converted to BBCH stages, of two field crops provided by the German Weather Service (DWD) were analyzed. We found a linear correlation between BBCH stages and the respective appearance dates, which can be used for interpolation of appearance dates of specific BBCH stages. Remarkably, when comparing BBCH stages from Germany and the Czech Republic almost identical correlations of appearance dates and BBCH stages were found. In the next step, soil and climate data from Joint Research Centre (JRC) were analyzed together with phenological data in order to evaluate if BBCH stages can be estimated for countries with other climate or soil conditions. This analysis revealed that temperature, global radiation and evaporation were the parameters with the strongest impact. These parameters were used for estimating appearance dates of BBCH stages for other countries. Exemplarily, appearance dates for maize BBCH were calculated for Italy. Estimated and observed appearance dates showed a high concordance (on average six days difference). Finally, the political of impact a variation of a few days on calculated pesticide concentration was analyzed. Exemplarily, the pesticide fate model FOCUS PEARL was used to estimate pesticide groundwater concentrations. When calculating concentrations for application dates varying by ± two weeks, concentrations in groundwater usually varied very little. The highest variation was found for application at BBCH 30 in maize (6.6 % variation over all scenarios). These results showed that the uncertainty included in the estimation of appearance dates of BBCH stages for other countries has a relatively small effect on the results of PEARL and consequentially on the decision of the pesticide risk assessment by changing only the application date.     

Characterizing pesticide sorption and degradation in microscale biopurification systems using column displacement experiments

Biopurification systems treating pesticide contaminated water are very efficient, however they operate as a black box. Processes inside the system are not yet characterized. To optimize the performance, knowledge of degradation and retention processes needs to be generated. Therefore, displacement experiments were carried out for four pesticides (isoproturon, bentazone, metalaxyl, linuron) in columns containing different organic mixtures. Bromide, isoproturon and bentazone breakthrough curves (BTCs) were well described using the convection-dispersion equation (CDE) and a first-order degradation kinetic approach. Metalaxyl and linuron BTCs were well described using the CDE model expanded with Monod-type kinetics. Freundlich sorption, first-order degradation and Monod kinetics coefficients were fitted to the BTCs. Fitted values of the distribution coefficient K_f,column were much lower than those determined from batch experiments. Based on mobility, pesticides were ranked as: bentazone > metalaxyl - isoproturon > linuron. Based on degradability, pesticides were ranked as: linuron > metalaxyl - isoproturon > bentazone.     

Assessing Landscape Functions with Broad-Scale Environmental Data: Insights Gained from a Prototype Development for Europe

We examine the advantages and disadvantages of a methodological framework designed to analyze the poorly understood relationships between the ecosystem properties of large portions of land, and their capacities (stocks) to provide goods and services (flows). These capacities (stocks) are referred to as landscape functions. The core of our assessment is a set of expert- and literature-driven binary links, expressing whether specific land uses or other environmental properties have a supportive or neutral role for given landscape functions. The binary links were applied to the environmental properties of 581 administrative units of Europe with widely differing environmental conditions and this resulted in a spatially explicit landscape function assessment. To check under what circumstances the binary links are able to replace complex interrelations, we compared the landscape function maps with independently generated continent-wide assessments (maps of ecosystem services or environmental parameters/indicators). This rigorous testing revealed that for 9 out of 15 functions the straightforward binary links work satisfactorily and generate plausible geographical patterns. This conclusion holds primarily for production functions. The sensitivity of the nine landscape functions to changes in land use was assessed with four land use scenarios (IPCC SRES). It was found that most European regions maintain their capacity to provide the selected services under any of the four scenarios, although in some cases at other locations within the region. At the proposed continental scale, the selected input parameters are thus valid proxies which can be used to assess the mid-term potential of landscapes to provide goods and services.