Separation and capture of CO2 from large stationary sources and sequestration in geological formations--coalbeds and deep saline aquifers

The topic of global warming as a result of increased atmospheric CO2 concentration is arguably the most important environmental issue that the world faces today. It is a global problem that will need to be solved on a global level. The link between anthropogenic emissions of CO2 with increased atmospheric CO2 levels and, in turn, with increased global temperatures has been well established and accepted by the world. International organizations such as the United Nations Framework Convention on Climate Change (UNFCCC) and the Intergovernmental Panel on Climate Change (IPCC) have been formed to address this issue. Three options are being explored to stabilize atmospheric levels of greenhouse gases (GHGs) and global temperatures without severely and negatively impacting standard of living: (1) increasing energy efficiency, (2) switching to less carbon-intensive sources of energy, and (3) carbon sequestration. To be successful, all three options must be used in concert. The third option is the subject of this review. Specifically, this review will cover the capture and geologic sequestration of CO2 generated from large point sources, namely fossil-fuel-fired power gasification plants. Sequestration of CO2 in geological formations is necessary to meet the President's Global Climate Change Initiative target of an 18% reduction in GHG intensity by 2012. Further, the best strategy to stabilize the atmospheric concentration of CO2 results from a multifaceted approach where sequestration of CO2 into geological formations is combined with increased efficiency in electric power generation and utilization, increased conservation, increased use of lower carbon-intensity fuels, and increased use of nuclear energy and renewables. This review covers the separation and capture of CO2 from both flue gas and fuel gas using wet scrubbing technologies, dry regenerable sorbents, membranes, cryogenics, pressure and temperature swing adsorption, and other advanced concepts. Existing commercial CO2 capture facilities at electric power-generating stations based on the use of monoethanolamine are described, as is the Rectisol process used by Dakota Gasification to separate and capture CO2 from a coal gasifier. Two technologies for storage of the captured CO2 are reviewed--sequestration in deep unmineable coalbeds with concomitant recovery of CH4 and sequestration in deep saline aquifers. Key issues for both of these techniques include estimating the potential storage capacity, the storage integrity, and the physical and chemical processes that are initiated by injecting CO2 underground. Recent studies using computer modeling as well as laboratory and field experimentation are presented here. In addition, several projects have been initiated in which CO2 is injected into a deep coal seam or saline aquifer. The current status of several such projects is discussed. Included is a commercial-scale project in which a million tons of CO2 are injected annually into an aquifer under the North Sea in Norway. The review makes the case that this can all be accomplished safely with off-the-shelf technologies. However, substantial research and development must be performed to reduce the cost, decrease the risks, and increase the safety of sequestration technologies. This review also includes discussion of possible problems related to deep injection of CO2. There are safety concerns that need to be addressed because of the possibilities of leakage to the surface and induced seismic activity. These issues are presented along with a case study of a similar incident in the past. It is clear that monitoring and verification of storage will be a crucial part of all geological sequestration practices so that such problems may be avoided. Available techniques include direct measurement of CO2 and CH4 surface soil fluxes, the use of chemical tracers, and underground 4-D seismic monitoring. Ten new hypotheses were formulated to describe what happens when CO2 is pumped into a coal seam. These hypotheses provide significant insight into the fundamental chemical, physical, and thermodynamic phenomena that occur during coal seam sequestration of CO2.     

Influence of soil moisture on the sequestration of organic compounds in soil

A study was conducted as a part of continuing investigation of the effect of soil moisture on the sequestration of organic compounds aged in the soil. Here, experiments focused on the effects of moisture changes within the soil before, during, and after contaminant addition. The extractability of aged (68 d) phenanthrene was greater from soil that had been subjected to wetting and drying cycles prior to solute addition as compared to soil initially maintained at constant moisture. The recovery of phenanthrene added to moist soil was increased relative to extractability from soil that was air-dried at the time of the contaminant addition. Repeated wetting and drying of soil after the addition of atrazine or phenanthrene resulted in decreased extractability of the compounds as compared to samples maintained at constant moisture. A method for rapidly sequestering contaminants is proposed and may be useful in limiting the time required for laboratory studies involving “aged” contaminants. These data build upon the findings of earlier work from our laboratory and indicate that changes in the moisture conditions of soil can affect the availability of sequestered contaminants possibly through alterations in the structure of the natural solid.     

Plant uptake and translocation of air-borne chlordane and comparison with the soil-to-plant route

In order to assess fully the impact of persistent organic pollutants (POPs) on human health, pollutant exchange at the interface between terrestrial plants, in particular food crops, and other environmental compartments must be thoroughly understood. In this regard, transfers of multicomponent and chiral pollutants are particularly informative. In the present study, zucchini (Cucurbita pepo L.) was planted in containerized, uncontaminated soil under both greenhouse and field conditions and exposed to air-borne chlordane contamination at 14.0 and 0.20 ng/m(3) (average, greenhouses), and 2.2 ng/m(3) (average, field). Chiral gas chromatography interfaced to an ion trap mass spectrometer was used to determine the chiral (trans-chlordane, TC, and cis-chlordane, CC) and achiral (trans-nonachlor, TN) chlordane components in vegetation, air, and soil compartments. The chlordane components of interest were detected in all vegetation tissues examined--root, stem, leaves, and fruits. When compared with the data from a soil-to-plant uptake study, the compositional profile of the chlordane components, i.e. the component fractions of TC, CC, and TN, in plant tissues, showed significantly different patterns between the air-to-plant and soil-to-plant pathways. Changes in the enantiomer fractions of TC and CC in plant tissues relative to the source, i.e. air or soil, although observed, were not markedly different between the two routes. This report provides the first comprehensive comparison between two distinct plant uptake routes for POPs and their subsequent translocation within plant tissues.     

Penetration of herbicides to groundwater in an unconfined chalk aquifer following normal soil applications

The persistence and penetration of the herbicides isoproturon and chlorotoluron in an unconfined chalk aquifer has been monitored over a 4-year period through soil sampling, shallow coring and groundwater monitoring. Chlorotoluron was applied on plots as a marker compound, having never been used previously on that, or surrounding fields. The fieldsite had a 5 degree slope with soil depths of 0.5 to 1.5 m and a water table between 20 and 5 m from the soil surface. Where the water table was deepest (9-20 m below surface (mbs)) little or no positive herbicide detections were made. However, where the water table was at only 4-5 mbs, a regular pesticide signal of around 0.1 microg/l for isoproturon and chlorotoluron could be distinguished. Over the winter recharge period automatic borehole samplers revealed a series of short-lived peaks of isoproturon and chlorotoluron reaching up to 0.8 microg/l. This is consistent with a preferential flow mechanism operating at this particular part of the field. Such peaks were occurring over 2 years after the last application of these compounds. Shallow coring failed to uncover any significant pesticide pulse moving through the deep unsaturated zone matrix at the fieldsite.     

Seat strength in rear body block tests

Purpose: This study collected and analyzed available testing of motor vehicle seat strength in rearward loading by a body block simulating the torso of an occupant. The data were grouped by single recliner, dual recliner, and all belts to seat (ABTS) seats.

Methods: The strength of seats to rearward loading has been evaluated with body block testing from 1964 to 2008. The database of available tests includes 217 single recliner, 65 dual recliner, and 18 ABTS seats. The trends in seat strength were determined by linear regression and differences between seat types were evaluated by Student's t-test. The average peak moment and force supported by the seat was determined by decade of vehicle model year (MY).

Results: Single recliner seats were used in motor vehicles in the 1960s to 1970s. The average strength was 918 ± 224 Nm (n = 26) in the 1960s and 1,069 ± 293 Nm (n = 65) in the 1980s. There has been a gradual increase in strength over time. Dual recliner seats started to phase into vehicles in the late 1980s. By the 2000s, the average strength of single recliner seats increased to 1,501 ± 335 Nm (n = 14) and dual recliner seats to 2,302 ± 699 Nm (n = 26). Dual recliner seats are significantly stronger than single recliner seats for each decade of comparison (P < .001). The average strength of ABTS seats was 4,395 ± 1,185 in-lb for 1989–2004 MY seats (n = 18). ABTS seats are significantly stronger than single or dual recliner seats (P < .001). The trend in ABTS strength is decreasing with time and converging toward that of dual recliner seats.

Conclusions: Body block testing is an quantitative means of evaluating the strength of seats for occupant loading in rear impacts. There has been an increase in conventional seat strength over the past 50 years. By the 2000s, most seats are 1,700–3,400 Nm moment strength. However, the safety of a seat is more complex than its strength and depends on many other factors.     

Mating effort and space use of an alpine ungulate during the rut

In ungulates, the rut generally leads to increased intra and interpopulation movements for males. Because movements induce energetic costs and missed feeding opportunities, they could be an indication of male mating effort. We studied space use of 44 male mountain goats (Oreamnos americanus) from three neighboring subpopulations in southeast Alaska, during the rut from 2005 to 2008. Using mixed models and an information theoretic approach with AIC, we analyzed the relationships between individual traits of males and their space use. We found no indication of breeding migration between subpopulations. Distances between individual seasonal ranges were not related to any individual trait. Daily movements, home range sizes, and total distance traveled during the rut did not vary with mass or age of individuals. As such, effects of individual traits on male space use during the rut appear weak and observed space use patterns do not support any of the main mating effort hypotheses.     

A comparison of spatial learning and memory capabilities in intertidal gobies

For the majority of animals, the ability to orient in familiar locations is a fundamental part of life, and spatial memory allows individuals to remember key locations such as food patches, shelter, mating sites or areas regularly occupied by predators. This study determined if gobies collected from rocky platforms and sandy beaches differ in their ability to learn and memorise the locations of tide pools in a simulated rocky intertidal zone. Intertidal rock pool gobies show acute homing abilities and, therefore, should be expected to display superior learning and memory capabilities. In contrast, it is unlikely that natural selection would favour similar learning skills in sandy shore fishes because they simply shift back and forth with the tides. The learning abilities of gobies were tested using small replica rock platforms, containing four tide pools that retained varying depths of water at simulated low tide. Gobies were categorised as having learnt the task if they were able to consistently locate the tide pool that retained the most water at simulated low tide as the pool with the most favourable conditions. Rock pool species were able to locate the deepest pool to wait out low tide for ~95 % of the trials, while species from sandy shores were found in the deepest pool ~10 % of trials. Despite repeated stranding, sandy shore fish continued to follow the tide out. We propose that rock pool species memorised the location of rock pools during simulated high tide enabling them to relocate the best refuge for low tide.     

Site fidelity and homing behaviour in intertidal fishes

The theory of ecological cognition poses that the brains and behaviour of animals are shaped by the environmental challenges they face in their everyday lives. Site fidelity and homing ability was tested for five species of intertidal rock pool fish by tagging and displacing them to new rock pools at various distances from their ‘home’ rock pools. Three of the species were rock pool specialists whilst the remaining two spend a small proportion of their life in rock pools during early ontogeny. The three specialists showed strong site fidelity with >50 % of individuals found in the same pool 42 days after tagging. In contrast, the non-specialist species showed low fidelity and poor homing abilities. Homing success in the rock pool specialists remained relatively stable as displacement distance increased. The effect of body size on homing ability was species dependent, with only one species showing a significantly greater tendency to home with increasing size.     

Defending the Wrist Deviation Test for Carpal Tunnel Syndrome Screening: A Comparison of Vibration Thresholds and Distal Motor Latency

This research used distal motor latency (DML) and vibration thresholds (VT) to evaluate 84 hand activity and wrist deviation combinations to determine the best association with carpal tunnel syndrome (CTS). Female volunteers, 2 healthy and 2 CTS diagnosed, were age matched and operated a keyboard for 4 hrs a day. Room temperature was 28°C(±2). Beginning DML and VT were taken with a relaxed neutral posture hand. The wrist was deviated in a randomly selected combination, and determinations were taken at 5-min intervals. The trial ended at 20 min or when discomfort was felt. The CTS conditions were discriminated by pain four times, DML once, and VT 14 times. Vibrometry was the most consistent CTS discriminator. The best VT results for wrist positions were obtained with wrist extension and extended extension, whereas the unclenched, clenched, and loaded power grip activities proved to be the most consistent hand activities.     

Paving the Way for Invasive Species: Road Type and the Spread of Common Ragweed (<Emphasis Type="Italic">Ambrosia artemisiifolia</Emphasis>)

Roads function as prime habitats and corridors for invasive plant species. Yet despite the diversity of road types, there is little research on the influence of these types on the spread of invaders. Common ragweed (Ambrosia artemisiifolia), a plant producing large amounts of allergenic pollen, was selected as a species model for examining the impact of road type on the spread of invasive plants. We examined this relationship in an agricultural region of Quebec, Canada. We mapped plant distribution along different road types, and constructed a model of species presence. Common ragweed was found in almost all sampling sites located along regional (97%) and local paved (81%) roads. However, verges of unpaved local roads were rarely (13%) colonized by the plant. A model (53% of variance explained), constructed with only four variables (paved regional roads, paved local roads, recently mown road verges, forest cover), correctly predicted (success rate: 89%) the spatial distribution of common ragweed. Results support the hypothesis that attributes associated with paved roads strongly favour the spread of an opportunistic invasive plant species. Specifically, larger verges and greater disturbance associated with higher traffic volume create propitious conditions for common ragweed. To date, emphasis has been placed on controlling the plant in agricultural fields, even though roadsides are probably a much larger seed source. Strategies for controlling the weed along roads have only focused on major highways, even though the considerable populations along local roads also contribute to the production of pollen. Management prioritizations developed to control common ragweed are thus questionable.