Collaborative Testing of Methods to Measure Air Pollutants II. The Non-Dispersive Infrared Method for Carbon Monoxide

The Methods Standardization Branch of the Environmental Protection Agency, National Environmental Research Center, has undertaken a program to standardize methods used in measuring air pollutants covered by the national primary and secondary air quality standards. This paper presents the results of a collaborative test of the method specified for carbon monoxide.

The test involved analysis of CO in air samples (in cylinders) by participating laboratories. Three concentrations, covering the range of the method which is, 0 to 58 mg/m³, were analyzed dry and humidified on each of three days by 15 collaborators. The method of analysis, nondispersive infrared spectrometry (NDIR), involved an NDIR instrument in combination with different procedures for eliminating water vapor interference. A statistical analysis of the data obtained produced the following results: 1. The checking limit for duplicates (replication error) is 0.5 mg/m³.

2. The repeatability (variation within a laboratory) is 1.6 mg/m³.

3. The reproducibility (variation between laboratories) varies nonlinearly with concentration; i.e., a minimum of 2.3 mg/m³ at a concentration of 20 mg/m³ and ranges as high as 4.3 mg/m³ in the concentration range of 0 to 58 mg/m³.

4. The reproducibility at the level of the national primary ambient air quality standard, 10 mg/m³-8-hour average, is 2.5 mg/m³ or 25%.

5. The minimum detectable sensitivity is estimated to be 0.3 mg/m³.

6. Compensation for water vapor interference is satisfactorily accomplished using drying agents and refrigeration methods. The use of narrow-band optical filters alone may not provide adequate compensation.

7. The accuracy obtained depends upon the availability of reliable calibration gases. Based on the results of this study, the method produces results that average 2.5% high.

Future papers will contain test results for methods to measure other air pollutants.     

基于生物可给性的某冶炼厂土壤重金属健康风险评价

为科学评价重金属污染场地的人体健康风险,以某冶炼厂土壤为研究对象,采用PBET(Physiologically-Based Extraction Test)和IVG(In-Vitro gastrointestinal)两种方法测定了As、Cd、Cu、Pb、Zn的生物可给性,并对比了只考虑重金属总量与基于生物可给性的人体...     

Background culturable bacteria aerosol in two large public buildings using HVAC filters as long term, passive, high-volume air samplers

Background culturable bacteria aerosols were collected and identified in two large public buildings located in Minneapolis, Minnesota and Seattle, Washington over a period of 5 months and 3 months, respectively. The installed particulate air filters in the ventilation systems were used as the aerosol sampling devices at each location. Both pre and final filters were collected from four air handing units at each site to determine the influence of location within the building, time of year, geographical location and difference between indoor and outdoor air. Sections of each loaded filter were eluted with 10 ml of phosphate buffered saline (PBS). The resulting solutions were cultured on blood agar plates and incubated for 24 h at 36 degrees C. Various types of growth media were then used for subculturing, followed by categorization using a BioLog MicroStation (Biolog, Hayward, CA, USA) and manual observation. Environmental parameters were gathered near each filter by the embedded on-site environmental monitoring systems to determine the effect of temperature, humidity and air flow. Thirty nine different species of bacteria were identified, 17 found only in Minneapolis and 5 only in Seattle. The hardy spore-forming genus Bacillus was the most commonly identified and showed the highest concentrations. A significant decrease in the number of species and their concentration occurred in the Minneapolis air handling unit supplying 100% outdoor air in winter, however no significant correlations between bacteria concentration and environmental parameters were found.     

Temporal variability in water quality parameters—a case study of drinking water reservoir in Florida, USA

Our objective was to evaluate changes in water quality parameters during 1983–2007 in a subtropical drinking water reservoir (area: 7 km²) located in Lake Manatee Watershed (area: 338 km²) in Florida, USA. Most water quality parameters (color, turbidity, Secchi depth, pH, EC, dissolved oxygen, total alkalinity, cations, anions, and lead) were below the Florida potable water standards. Concentrations of copper exceeded the potable water standard of <30 μg?l^?1 in about half of the samples. About 75 % of total N in lake was organic N (0.93 mg?l^?1) with the remainder (25 %) as inorganic N (NH₃-N: 0.19, NO₃-N: 0.17 mg?l^?1), while 86 % of total P was orthophosphate. Mean total N/P was <6:1 indicating N limitation in the lake. Mean monthly concentration of chlorophyll-a was much lower than the EPA water quality threshold of 20 μg?l^?1. Concentrations of total N showed significant increase from 1983 to 1994 and a decrease from 1997 to 2007. Total P showed significant increase during 1983–2007. Mean concentrations of total N (n?=?215; 1.24 mg?l^?1) were lower, and total P (n?=?286; 0.26 mg?l^?1) was much higher than the EPA numeric criteria of 1.27 mg total N l^?1 and 0.05 mg total P l^?1 for Florida’s colored lakes, respectively. Seasonal trends were observed for many water quality parameters where concentrations were typically elevated during wet months (June–September). Results suggest that reducing transport of organic N may be one potential option to protect water quality in this drinking water reservoir.     

Geochemical investigations of metals release from submerged coal fly ash using extended elutriate tests

A storage pond dike failure occurred at the Tennessee Valley Authority Kingston Fossil Plant that resulted in the release of over 3.8 million cubic meters (5 million cubic yards) of fly ash. Approximately half of this material deposited in the main channel of the Emory River, 3.5 km upstream of the confluence of the Emory and Clinch Rivers, Tennessee, USA. Remediation efforts to date have focused on targeted removal of material from the channel through hydraulic dredging, as well as mechanical excavation in some areas. The agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could alter the redox state of metals present in the fly ash and thereby change their sorption and mobility properties. A series of extended elutriate tests were used to determine the concentration and speciation of metals released from fly ash. Results indicated that arsenic and selenium species released from the fly ash materials during elutriate preparation were redox stable over the course of 10d, with dissolved arsenic being present as arsenate, and dissolved selenium being present as selenite. Concentrations of certain metals, such as arsenic, selenium, vanadium, and barium, increased in the elutriate waters over the 10d study, whereas manganese concentrations decreased, likely due to oxidation and precipitation reactions.     

Occupational exposure to NDMA and NMor in the European rubber industry

Many nitrosamines are suspected of being human carcinogens, with the highest concentrations in the environment being measured in the rubber industry. Time trends of personal exposure to N-nitrosodimethylamine (NDMA) and to N-nitrosomorpholine (NMor) during the past two decades in the German rubber industry were analysed and compared with cross-sectional studies in the same period in the Netherlands, Poland, the UK and Sweden. In the majority of the surveyed departments exposures reduced over time, but considerable heterogeneity was present between departments and sectors. Significant reductions were primarily found in curing and post-treating departments and ranged from -3% year(-1) to -19% year(-1). In contrast, NDMA levels increased (+13% year(-1)) in maintenance and engineering in the tyres industry. Average NDMA-levels in general rubber goods (GRG) and NMor-levels in tyre production in Germany did not decrease significantly in the past two decades, whereas NDMA-levels in tyre production (-10% year(-1)) and NMor-levels in GRG (-7% year(-1)) declined significantly after the introduction of an exposure limit for total nitrosamines in Germany in 1988. Confidence intervals of average exposures in other studied countries largely overlap trends observed in Germany. Exposure to N-nitrosamines decreased on average two-to-five fold in the German rubber industry with comparable concentration levels in other European countries. Although average levels are well below the current limits exposure has not been eliminated, and incidental high exposures do still occur.     

Enantiospecific sublethal effects of the antidepressant fluoxetine to a model aquatic vertebrate and invertebrate

Many contaminants are chiral compounds with enantiomers that may differ markedly in environmental fate, bioavailability, and toxicity. Enantiospecific environmental fate and ecotoxicological information are lacking for many chiral contaminants. The primary objective of this investigation included an assessment of potential enantiospecific differences in sublethal standardized and behavioral responses of the model organisms Pimephales promelas (teleost) and Daphnia magna (crustacean) to the widely prescribed chiral antidepressant fluoxetine. Endpoints assessed included D. magna immobilization, reproduction, and grazing rate and P. promelas survival, growth, and feeding rate. S-Fluoxetine was found to be more toxic to sublethal standardized and behavioral endpoints in P. promelas, potentially because its primary active metabolite, S-norfluoxetine, is more potent than the same metabolite of R-fluoxetine in mammals. This was not observed for D. magna responses. This differential enantiospecific response between model organisms may have resulted from closer target homology between mammals and fish than between mammals and crustaceans. P. promelas feeding rate, an ecologically relevant and mode-of-action related response, was the most sensitive endpoint tested for R- and S-fluoxetine with 10% effect concentration (EC10) values (+/-SE) of 16.1 (+/-20.2) and 3.7 (+/-4.6) microg l(-1), respectively. Up to a 9.4-fold difference in toxicity between enantiomers was observed; P. promelas growth EC10s (+/-SE) for R- and S-fluoxetine were 132.9 (+/-21.2) and 14.1 (+/-8.1) microg l(-1), respectively. Such differences in sublethal responses to fluoxetine enantiomers suggest that enantiospecific toxicity and mode-of-action related responses that are ecologically relevant (e.g., feeding rate) should be considered in future ecological hazard and risk assessments for chiral contaminants.     

Cat ownership and Proximity to Significant Ecological Areas Influence Attitudes Towards Cat Impacts and Management Practices

Environmental Management - Cat ownership is increasing globally, representing a growing threat to urban wildlife. Although some cities have policies and strategies for managing owned cats, the...