Sleepiness among night-time drivers: relationship to blood alcohol concentration and other factors

OBJECTIVE: The study aimed to explore the distribution and correlates of subjective sleepiness among the general night-time driving population. METHODS: The survey took place in three British Columbia communities in June 2003 between 21:00 hours to 03:00 hours. Sites and vehicles were selected randomly. Surveyors obtained information on several demographic and situational variables including self-assessed degree of sleepiness and self-reported hours asleep and awake, as well as an objective measure of blood alcohol concentration obtained from a hand-held breath-testing device. RESULTS: The total compliance rate among intercepted drivers was 85%. Among the 2335 drivers responding to the questionnaire, 68.4% indicated that they were wide awake, 27.6% were somewhat sleepy, and 4.1% were very sleepy. Logistic regression quantified the independent contributions of the various factors to subjective sleepiness. Male drivers with positive blood alcohol concentrations under 50 mg% were more likely to report feeling sleepy than those with either higher or with zero blood alcohol concentration. Greater relative risk of sleepiness was also associated with being female, being under age 55, and advanced hour of night. Driving with passengers of the same gender was associated with lower reported sleepiness. CONCLUSIONS: A substantial proportion of night-time drivers are driving while sleepy, especially at late night and early morning hours. The combination of alcohol and sleepiness compounds impairment in experimental studies and deserves greater attention in crash risk studies and as a topic for public education and awareness.     

Mode choice model for vulnerable motorcyclists in Malaysia

OBJECTIVE: In developing countries, motorcycle use has grown in popularity in the past decades. Commensurate with this growth is the increase in death and casualties among motorcyclists in these countries. One of the strategic programs to minimize this problem is to reduce motorcyclists exposure by shifting them into safer modes of transport. This study aims to explore the differences in the characteristics of bus and motorcycle users. It identifies the factors contributing to their choice of transport mode and estimates the probability that motorcyclists might change their travel mode to a safer alternative; namely, bus travel. METHODS: In this article, a survey of 535 motorcycle and bus users was conducted in seven districts of Selangor state, Malaysia. A binary logit model was developed for the two alternative modes, bus and motorcycle. RESULTS: It was found that travel time, travel cost, gender, age, and income level are significant in influencing motorcyclists' mode choice behavior. The probability of motorcycle riders shifting to public transport was also examined based on a scenario of a reduction in bus travel time and travel cost. CONCLUSIONS: Reduction of total travel time for the bus mode emerges as the most important element in a program aimed at attracting motorcyclists towards public transport and away from the motorcycle mode.     

Young driver risk in relation to parents' retrospective driving record

PROBLEM: Parents are an important potential influence on the driving safety of their children. This study examined the relationship of parental driving record on male and female offspring's at-fault collision risk. METHOD: Drivers aged 16-21 on the date of full licensure were selected from driver records and a matching process was used to identify putative parents in two-parent households. Poisson regression models were developed to predict at-fault collisions of male and female youth in the three years following full licensure from parents' at-fault collisions, speeding offenses, and other moving offenses in the four years prior to children's licensure. One set of models examined the relative risk associated with increasing numbers of maternal and paternal at-fault collisions and offenses. Other models examined the joint versus separate maternal and parental contributions. RESULTS: Controlling for region of residence, both mothers' and fathers' at-fault collisions were associated with an increased risk in both male and female youth at-fault collisions. Mothers' and fathers' speeding offenses were also associated with increased relative risk of at-fault collisions for both sons and daughters, while fathers' other moving offenses increased collision risk for sons but not daughters. DISCUSSION: Further research is required to identify how parental driving risk is transmitted to children. IMPACT ON INDUSTRY: (a) Parents of young children should be informed of their role in influencing their children's future driving risk; (b) The results identify risk factors that could be of interest to licensing authorities and the insurance industry.     

SAFEST TO TRAVEL BY BICYCLE,CAR, OR BIG TRUCK?

This study compares highway crash incidence, injuries, and costs by vehicle type. Annual crash and injury incidence were estimated using Crashworthiness Data System (1988-1991), National Automotive Sampling System (1982-1986), General Estimates System (1992-1993), and Fatal Analysis Reporting System (1993) data. Costs were computed based on restraint use, body region, and threat-to-life severity of the injury. Costs were then allocated between vehicle types using three different methods in order to answer comparative safety questions. Motor vehicle and bicycle crash costs total $389 billion annually; 75% resulting from passenger vehicles. Motorcycles and bicycles have the highest costs per 1000 vehicle and passenger miles; costs per victim are highest for pedestrians, bicyclists, and motorcyclists. Costs per vehicle mile for heavy trucks and passenger cars are comparable but exceed costs for light trucks. Passenger vehicle occupants are safest if a crash occurs. Light truck, other single truck, and bus occupants have the lowest cost per passenger mile, but higher costs than air and rail travelers. Motorcyclists face the greatest risks. Combination trucks may not impose an excess risk to other drivers, but their drivers face large risks.     

Defending the Wrist Deviation Test for Carpal Tunnel Syndrome Screening: A Comparison of Vibration Thresholds and Distal Motor Latency

This research used distal motor latency (DML) and vibration thresholds (VT) to evaluate 84 hand activity and wrist deviation combinations to determine the best association with carpal tunnel syndrome (CTS). Female volunteers, 2 healthy and 2 CTS diagnosed, were age matched and operated a keyboard for 4 hrs a day. Room temperature was 28°C(±2). Beginning DML and VT were taken with a relaxed neutral posture hand. The wrist was deviated in a randomly selected combination, and determinations were taken at 5-min intervals. The trial ended at 20 min or when discomfort was felt. The CTS conditions were discriminated by pain four times, DML once, and VT 14 times. Vibrometry was the most consistent CTS discriminator. The best VT results for wrist positions were obtained with wrist extension and extended extension, whereas the unclenched, clenched, and loaded power grip activities proved to be the most consistent hand activities.     

Assessment of an accidental vapour cloud explosion: Lessons from the Indian Oil Corporation Ltd. accident at Jaipur,India

On 29 October 2009, at 19:30 IST, a devastating vapour cloud explosion occurred in a large fuel storage area at the Indian Oil Corporation (IOC) Depot in Jaipur, India, generating significant blast pressure. As a consequence of this explosion, the entire installation was destroyed, buildings in the immediate vicinity were heavily damaged, and windowpane breakages were found up to 2 km from the terminal. The IOC estimated that the total loss from the fire and explosion was approximately INR 2800 million.Ironically, as a storage site, the Jaipur terminal was not highly congested, and thus was not considered to have adequate potential for a vapour cloud explosion (VCE). Nevertheless, the prima facie evidences indicate that this was a case of VCE. Therefore, the main objective of this study is to quantify the potential overpressures due to vapour cloud explosions (VCEs) using the Process Hazard Analysis DNV Norway based PHAST 6.51 Software. The results are validated by the extent of the damage that had occurred. The estimation of the VCE shows that a maximum 1.0 bar overpressure was generated in the surrounding area. The initial assessment of the accident data roughly estimates the release mode, time, and amount of vaporized fuel. A more accurate estimate has been obtained by modelling the dispersion of vapour clouds in the surrounding atmosphere, which reveals trends and relationships for the occurrence of vapour cloud explosions.     

Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.