MIXING INDUCED BY AN INTERNAL HYDRAULIC JUMP1

ABSTRACT The efficiency of an inverted internal hydraulic jump as a mixing and dispersion mechanism in an aquatic environment was examined. The flow considered was a two-dimensional buoyant flow from a shallow channel over a sloping bottom into a deep reservoir. It could be seen that a rapidly varied flow associated with violent turbulent mixing occurred near the point of discharge if specific discharge conditions and downstream controls were met. Downstream from the mixing zone the flow was stably stratified. The main object of the study was to find the conditions under which a turbulent mixing zone occurred and the rate of turbulent entrainment. Energy loss and length of the mixing zone were also investigated. The independent variables were the outlet densimetric Froude number, the density differential between outfall water and receiving water, the relative depths of the upper and lower layers in the stratified flow portion, the total depth, and the slope of the transition. Theoretical calculations had to be confined to a step increase in depth, but experiments in a laboratory flume showed that results obtained with slopes of 23° and 90° were quite similar. Both theory and experiments showed, for example, that dilution (entrainment rates) up to 2:1 (2 parts heated water to one part cold water) can be achieved at very little energy expense and with downstream depths approximately 8 times the outlet depth. Theoretically, any amount of dilution can be obtained, but large depths may be required. Experimental results also indicate that the length of the mixing zone was frequently ten times the value of the outlet densimetric Froude number.     

Importance of public relations in recycling strategies: principles and case studies

The separate collection of waste, and especially of recyclables with specific collection systems, would not be possible without the involvement of the users. Apart from the physical installations such as collection containers, collection points, etc., the motivation of the users is an essential component. Motivation can be reinforced through public relations work. In addition to the underlying technical considerations, this paper describes the difference between communication in general and public relations and specifically examines public involvement in recycling. Through the use of examples, we look at the targeted users and typical media employed. Furthermore, we analyzes the development of public involvement. The examples show that public relations for recycling strategies relies to a great extent on attitudes, habits, and access to the target group. Thus, standardized procedures cannot be developed. For these reasons, public relation activities must be planned carefully and professionally and include an analysis of the target group, choice of media, and verification of success.     

Monitoring ammonia in urban, inner alpine and pre-alpine ambient air

Passive samplers were used to monitor ammonia concentrations at rural inner alpine and pre-alpine, as well as urban, sites in Austria and Bavaria. Elevated concentrations were measured both at farms (up to 36 microg NH3 m(-3)) and at urban locations (up to 28 microg NH3 m(-3)). At urban locations a linear relationship between the traffic density and the NH3 concentration was found, but there was no marked seasonal trend. The highest ammonia concentrations were measured in a traffic tunnel (up to 78 microg NH3 m(-3)). The presence of livestock breeding or small scale alpine pastures resulted in elevated concentrations at the rural sites (8.1-12 and 2.5-4.6 microg NH3 m(-3), respectively), compared to the surrounding areas (3.1 and 0.9 microg NH3 m(-3)). Agriculture related sources are usually limited either spatially or seasonally. As the emissions were moderate in our case, a rapid removal and dilution of ammonia was possible and therefore the NH3 burden was only local. Sources related to traffic are more evenly distributed both geographically and seasonally. The WHO guideline, annual average concentration of 8 microg m(-3) for the protection of vegetation, was only exceeded at farms, at the urban station with the heaviest traffic and in the Tauerntunnel.     

The European Water Framework Directive: Water Quality Classification and Implications to Engineering Planning

The European Water framework directive (WFD) is probably the most important environmental management directive that has been enacted over the last decade in the European Union. The directive aims at achieving an overall good ecological status in all European water bodies. In this article, we discuss the implementation steps of the WFD and their implications for environmental engineering practice while focusing on rivers as the main receiving waters. Arising challenges for engineers and scientists are seen in the quantitative assessment of water quality, where standardized systems are needed to estimate the biological status. This is equally of concern in engineering planning, where the prediction of ecological impacts is required. Studies dealing with both classification and prediction of the ecological water quality are reviewed. Further, the combined emission–water quality approach is discussed. Common understanding of this combined approach is to apply the most stringent of either water quality or emission standard to a certain case. In contrast, for example, the Austrian water act enables the application of only the water quality based approach - at least on a temporary basis.     

Distal impacts of aquarium trade: Exploring the emerging sandhopper (<Emphasis Type="Italic">Orchestoidea tuberculata</Emphasis>) artisanal shore gathering fishery in Chile

Artisanal fishery activities support the livelihoods of millions of people worldwide, particularly in developing countries. Within these fisheries, distal global drivers can promote switching between alternative target resources. These drivers can promote the rapid development of new, unregulated and previously unexploited fisheries that pose a threat to the sustainability of ecosystems. In this paper, we describe a new artisanal shore gathering activity that targets a previously unexploited resource: the sandhopper (Orchestoidea tuberculata). The activity is driven by aquarium trade demand for food. We used mixed methods to describe the activity, assessed basic socio-economic incentives, and estimated Catches per Unit Effort. Results show that the sandhopper plays an important role for the livelihoods of shore gatherers engaged in the activity. Gatherers have adapted and developed two main extraction methods with different degrees of investment and extraction rates. Furthermore, gatherers have developed local knowledge regarding the ecology and management of the resource. Results show that economic incentives can motivate a rapid expansion of this unregulated activity. Future research gaps and management options to address the development of this fishery are discussed in light of these findings.     

Achieving biodiversity benefits with offsets: Research gaps,challenges, and needs

Biodiversity offsets are becoming increasingly common across a portfolio of settings: national policy, voluntary programs, international lending, and corporate business structures. Given the diversity of ecological, political, and socio-economic systems where offsets may be applied, place-based information is likely to be most useful in designing and implementing offset programs, along with guiding principles that assure best practice. We reviewed the research on biodiversity offsets to explore gaps and needs. While the peer-reviewed literature on offsets is growing rapidly, it is heavily dominated by ecological theory, wetland ecosystems, and U.S.-based research. Given that majority of offset policies and programs are occurring in middle- and low-income countries, the research gaps we identified present a number of risks. They also present an opportunity to create regionally based learning platforms focused on pilot projects and institutional capacity building. Scientific research should diversify, both topically and geographically, in order to support the successful design, implementation, and monitoring of biodiversity offset programs.     

Hotspots and key periods of Greenland climate change during the past six decades

We investigated air temperature and pressure gradients and their trends for the period 1996–2014 in Greenland and compared these to other periods since 1958. Both latitudinal temperature and pressure gradients were strongest during winter. An overall temperature increase up to 0.15 °C year^?1 was observed for 1996–2014. The strongest warming happened during February at the West coast (up to 0.6 °C year^?1), weaker but consistent and significant warming occurred during summer months (up to 0.3 °C year^?1) both in West and East Greenland. Pressure trends on a monthly basis were mainly negative, but largely statistically non-significant. Compared with other time windows in the past six decades, the period 1996–2014 yielded an above-average warming trend. Northeast Greenland and the area around Zackenberg follow the general pattern but are on the lower boundary of observed significant trends in Greenland. We conclude that temperature-driven ecosystem changes as observed in Zackenberg may well be exceeded in other areas of Greenland.     

Per-capita estimations of long-term historical land use and the consequences for global change research

Changes in land use and land cover are important in global climate change, but the many uncertainties in historical estimates seriously hamper climate modelling. We collected new data on estimated per capita land use over the last two millennia, using new data sources from the Humanities. In general, and in agreement with literature, we found that per capita land use indeed has not been constant in the past, but differ per region and over time. Land use in the distant past was mostly less than 1 ha/cap. However, the recently colonised regions show much higher values and have experienced a much higher per capita land use for the recent past. Most known trajectories follow a concave or bell-shaped curve towards the present.     

Test of aerobic TCE degradation by willows (Salix viminalis) and willows inoculated with TCE-cometabolizing strains of Burkholderia cepacia

Environmental Science and Pollution Research - Trichloroethylene (TCE) is a widespread soil and groundwater pollutant and clean-up is often problematic and expensive. Phytoremediation may be a...     

Spatially explicit sensitivity and uncertainty analysis for multicriteria-based vulnerability assessment

This research analyses the application of spatially explicit sensitivity and uncertainty analysis for GIS (Geographic Information System) multicriteria decision analysis (MCDA) within a multi-dimensional vulnerability assessment regarding flooding in the Salzach river catchment in Austria. The research methodology is based on a spatially explicit sensitivity and uncertainty analysis of GIS-CDA for an assessment of the social, economic, and environmental dimensions of vulnerability. The main objective of this research is to demonstrate how a unified approach of uncertainty and sensitivity analysis can be applied to minimise the associated uncertainty within each dimension of the vulnerability assessment. The methodology proposed for achieving this objective is composed of four main steps. The first step is computing criteria weights using the analytic hierarchy process (AHP). In the second step, Monte Carlo simulation is applied to calculate the uncertainties associated with AHP weights. In the third step, the global sensitivity analysis (GSA) is employed in the form of a model-independent method of output variance decomposition, in which the variability of the different vulnerability assessments is apportioned to every criterion weight, generating one first-order (S) and one total effect (ST) sensitivity index map per criterion weight. Finally, in the fourth step, an ordered weighted averaging method is applied to model the final vulnerability maps. The results of this research demonstrate the robustness of spatially explicit GSA for minimising the uncertainty associated with GIS-MCDA models. Based on these results, we conclude that applying the variance-based GSA enables assessment of the importance of each input factor for the results of the GIS-MCDA method, both spatially and statistically, thus allowing us to introduce and recommend GIS-based GSA as a useful methodology for minimising the uncertainty of GIS-MCDA.