Monitoring H2S air pollution caused by the industrial exploitation of geothermal energy: The pitfall of using lichens as bioindicators

This study showed that NH₃ emitted from geothermal power plants affects the surrounding epiphytic lichen vegetation and diversity, confounding the interpretation of lichen diversity counts in terms of air pollution by H₂S. The presence of nitrophytic lichen species around geothermal installations, determined by NH₃, caused relatively high diversity values that were not related with the levels of air pollution by H₂S. It is recommended that in the presence of NH₃ emission, nitrophytic species are excluded from the calculation of lichen diversity values.     

Valuing Improvements in The Water Rights System in South Africa: A Contingent Ranking Approach1

Speelman, Stijn, Stefano Farolfi, Aymen Frija, and Guido Van Huylenbroeck, 2010. Valuing Improvements in the Water Rights System in South Africa: A Contingent Ranking Approach. Journal of the American Water Resources Association (JAWRA) 46(6):1133–1144. DOI: 10.1111/j.1752-1688.2010.00480.x Abstract: In the context of increasing water scarcity, understanding is growing that irrigation water rights are important and that a lack of an effective water rights system constitutes a major reason for inefficient water management. This study carried out a contingent ranking experiment to study how smallholder irrigators in South Africa would value potential changes in water rights. Three specific dimensions of water rights, relevant for the South African case, are considered: duration, quality of title, and transferability. Results indicate that smallholder irrigators are prepared to pay considerably higher water prices if improvements are made in the water rights system. This implies that the proposed interventions in the water rights system would improve the efficiency and productivity of the small-scale irrigation sector. The increased willingness to pay could furthermore also assist the South African government to reach the objective of increased cost recovery.     

Toxic effects of four sulphonylureas herbicides on soil microbial biomass

The effect of four triazinyl-sulfonylurea herbicides (cinosulfuron, prosulfuron, thifensulfuron methyl, triasulfuron) on soil microbial biomass, soil respiration, metabolic activity, metabolic quotient, and some enzymatic activities (acid and alkaline phosphatase, β-glucosidase, arylsulphatase, and fluorescein diacetate hydrolysis) were monitored under controlled conditions over 30 days. The herbicides were applied at the normal field dose (FD) and at ten-fold (10 FD) the field dose, in order to mimic a long term toxic effect. The measured soil microbial parameters showed that the FD had slight effects on soil microflora, while at 10 FD the tested herbicides exerted a stronger detrimental effect on soil microbial biomass and its biochemical activities.     

Study of fluxing in Al refining process by rotary and crucible furnaces

The process used to obtain recycled Al alloys depends on the scrap quality. Rotary furnaces are normally used in Europe as they allow a great productivity and they can process low quality scrap using a salt flux to protect the molten metal from oxidation. In this article, the effect of the quantity of salt on the metal recovery has been experimentally investigated by melting several types of scrap under a mixture of NaCl–KCl–Na₃AlF₆ salts. The quantity of salt has been related to the salt factor (SF), which is the ratio between the non-metallic content in the scrap and the quantity of salt required. The same levels of salt factor have been tested by melting the scrap in rotary and crucible furnaces. The metal recovery increases with the salt content for both furnaces. The results obtained with the different melting processes are comparable because the yield difference is similar considering different salt factors. Crucible furnace gives greater metal recovery but it cannot replace rotary furnace in Al refining industry due to lower melting capacity. However, the results highlight that the optimisation of the Al refining process can be supported by preliminary tests through crucible furnaces reducing the time and material consumptions.     

Challenges in assessing the environmental consequences of dietary changes

Tom et al. (Environ Syst Decis 1–12, 2015) compared the energy requirements, water footprint, and greenhouse gas emissions of diet regimens recently recommended by the US Department of Agriculture. This editorial comments on a number of challenges related to the use of the results of life-cycle assessment studies to quantify the environmental impacts of dietary shifts.     

TG, FT-IR and NMR characterization of n-C16H34 contaminated alumina and silica after mechanochemical treatment

This paper deals with the application of mechanochemistry to model systems composed of alumina or silica artificially contaminated with n-C16H34. The mechanochemical treatment was carried out by means of a ring mill for times ranging from 10 to 40h. Thermogravimetry and infrared and nuclear magnetic resonance spectroscopies were used for the characterization of the mechanochemical products. The results have indicated that, in the case of alumina, almost all the contaminant n-C16H34 undergoes a complex oxidative reaction path whose end products are strongly held on the surface. These end products are most likely made of crosslinked, partially oxidized hydrocarbon chains bond to the solid surface via COO(-) groups. In the case of silica, the hydrocarbon undergoes a different, equally complex reaction path, but to a lower extent. In this case the end products are most probably carbonylic compounds and graphitic carbon. Then, for both solid matrices, the mechanochemical treatment promotes significant modification of the chemical nature of the polluting hydrocarbon with end products much more difficult to remove from the surface. As the systems studied are models of sites contaminated by aliphatic hydrocarbon, the results are worthy of consideration in relation to the mobility of the contaminants in the environment.     

Identification of stationary sources of air pollutants by concentration statistical analysis

The atmospheric concentrations of benzene, toluene, ethylbenzene and isomeric xylenes (BTEX) in a medium-sized town (S. Maria Capua Vetere, about 32000 inhabitants, Southern Italy) have been determined during working days and weekends in 2006. The procedure used was 24h passive adsorption by samplers distributed throughout the town followed by GC/MS analysis. On a yearly base, the arithmetic mean benzene concentrations were above the limit required by the 2000/69/CE European Directive. The Pearson correlation coefficients of the 24h geometric mean BTEX concentrations were indicative of stationary sources of toluene located in a well circumscribed area of the urban territory, active only during the working days and not officially recognized. The results highlight the effectiveness of the statistical approach used in this study for the identification of pollutant sources.     

Environmental and biological monitoring of iridium in the city of Rome

The use of iridium in the latest catalytic converters to further reduce nitrogen oxide emission in the exhaust of lean-burn engines could result in increased atmospheric levels of this element in high-density vehicle traffic areas. The objective of this study is to assess environmental Ir pollution and its urinary levels in workers and an urban control group. Environmental monitoring inside a tram consisted in air samplings of total suspended particles (TSP), PM10 and PM2.5 carried out during November 2005. Urinary Ir levels were evaluated in 64 municipal tram drivers and in 58 administrative employees as controls. Quantification of Ir in air samples and urine was performed by means of Sector Field Inductively Coupled Plasma Mass Spectrometry. Means+/-standard deviation of Ir levels in TSP, in PM10 and PM2.5 fractions were 1.43+/-1.66, 0.44+/-0.27 and 0.36+/-0.19 pg m(-3), respectively. No statistically significant differences were observed among urinary Ir values in the exposed subjects and control group. The Ir levels in Rome air are still sufficiently low, even if the increased use of new Ir-based catalysts could be of some concern in the near future. The results of our study are of interest as they are a first attempt to explore airborne levels and urinary concentrations of Ir in an urban context at medium-high density of vehicle traffic. Particular attention should be given to the fact that Ir was found in the finest dust particles as the effects of fine particles containing Ir have not yet been studied.