Environmental release and mass flux partitioning of PCDD/Fs during normal and transient operation of full scale waste to energy plants

The paper reports on global release and mass partitioning in the flux of residues of PCDD/Fs, evaluated with dedicated field campaigns at a municipal solid waste incineration plant during normal and transient operation. Results are compared with those obtained in other installations equipped with furnaces, energy recovery options and flue gas treatment technologies representative of most of the European incineration plants currently in operation. Levels of the pollutants of interest were determined in all the solid, liquid and gaseous residues produced by every single facility, and the results analysed in terms of the effects arising from the fed waste and the configuration of the plant. PCDD/Fs total release between 1.5 and 45 microg I-TEQ per ton of burned waste was evaluated, with lower values resulting from the adoption of catalytic conversion process for flue gas treatment. Most of the mass flux emitted is associated with solid residues deriving from activated carbon PCCD/F dry removal options, with significant contributions also from fly ash produced by particulate removal devices located immediately downstream the boiler and from scrubber blowdowns treatment sludge. During transient operating conditions the dioxin total release may increase by 50% with comparison to steady-state functioning.     

Evaluation of the impact on entomocoenosis of active agents allowed in organic olive farming against Bactrocera oleae (Gmelin, 1790)

Several attempts for evaluating environmental impact of active agents allowed in organic olive farming against Bactrocera oleae have been made, but very few studies were performed contemporaneously on more than one of them. Insects were chosen as indicators because they are known to react very quickly to environmental perturbations, mainly at the community level. In fact, the coenosis is the functional unit interacting with biotic and abiotic environmental parameters. Seven taxa, known for their sensitivity to habitat alterations, were sampled and grouped in functional groups: predators and parasitoids, phytophagouses and pollinators. The coenotic balance between these two functional groups was analyzed. The study was carried out in an organic olive orchard in the municipality of Terranova da Sibari, Cosenza, Southern Italy. The tested active agents (Azadirachtin, Rotenone, Copper Oxychloride) were sprayed twice (end of September and middle October). During the treatments the population dynamics of all the taxa were knocked-down. No one tested compound seems to be harmless to the entomocoenosis, particularly on phytophagouses and pollinators. In truly organic farming it is necessary to provide natural refuge areas to beneficial insects (i.e. pest antagonists) in which no active agents are sprayed and alternative preys could be found.     

Sustainability indicators for environmental performance and sustainability assessment of the productions of four fine Italian wines

Increased awareness of the importance of environmental protection and the introduction of international standards like ISO 14001 stimulated development of environmental sustainability indicators as a means to measure systems environmental performance. Here, a thermodynamic approach, emergy analysis (Odum, 1988) was used to obtain sustainability indicators able to analyse and quantify the productive and ecological performance of four famous Italian wine productions: Chianti, Brunello di Montalcino, Nobile di Montepulciano, and Barbera d'hti. The application to agricultural production was motivated by the growing need for productive and environmentally sound development in modern agriculture, in which the resource base, the environment, is preserved. The choice of wines, more precisely, grape production, is due to their importance for Italian agriculture and the economy. All the wines demonstrated a good long-term environmental sustainability, especially in view of their high quality and in comparison with the average Italian wine production. Emergy analysis proved a powerful tool for assessing environmental performance of these systems, and its use could easily be extended to other wine productions to obtain a form of environmental performance classification of this product. Systematic use of emergy analysis to assess environmental performance of different processes and products, not necessarily in agriculture, could be useful for environmental certification.     

Prey ecology and behaviour affect foraging strategies in the Great Cormorant

The fine link between a particular dive pattern and a specific prey item represents a challenging task in the analysis of marine predator–prey relationships. There is growing evidence that prey type affects diving seabirds’ foraging strategies, dive shapes and underwater activity costs. This study investigates whether a generalist diver, the Great Cormorant Phalacrocorax carbo, modifies the time budget allocated to prey-capture behaviour and breathing strategies (reactive vs. anticipatory) with respect to the prey type (pelagic vs. benthic). Video recordings of 91 Great Cormorants show how the ecology and behaviour of their main prey, Mullets (Mugilidae) and Flounders Platichthys flesus, affect dive/surface durations and the diving pattern. The demersal habit and the low mobility of Flounders leads to an easy access to prey with an anticipatory strategy. Moreover, the patchy distribution of this fish species increases prey-capture rates. Conversely, Mullets exploit the whole water column and are highly mobile, and this is reflected in the need of performing two sequential dives to capture a prey, both longer and likely more expensive, with a consequent switch of strategy from reactive in the searching phase to anticipatory breathing during prey-capture events. This study provides evidence that a generalist diver may switch between different foraging strategies, and it shows how each of them may be optimal under particular ecological conditions. These constraints influence the dynamics that operate within the marine food chains and have relevant implications in managing lagoon areas, including fish ponds.     

Distribution of Cd and As in organs and tissues of four marine mammal species stranded along the Italian coasts

Concentrations of Cd and As were determined in organs and tissues (muscle, heart, kidney, lung and liver) of four cetacean species (Stenella coeruleoalba, Truncatus truncatus, Grampus griseus and Ziphius cavirostris) stranded along the Italian coasts during the period 2000-2009. Significant differences were found between Cd concentrations in the different analysed tissues. Particularly, the kidney shows the highest concentrations of Cd in all analysed specimens, followed by the liver. No systematic or statistically significant difference in As concentrations was found in the analysed tissues. Considerable differences of Cd and As values in samples from different geographical areas (Sicily Channel, Adriatic Sea and Tyrrhenian Sea) were found, with the highest values measured in samples from the Sicily Channel. This basically suggests that anthropogenic and natural sources significantly affect Cd and As content in cetaceans.     

Identification of stationary sources of air pollutants by concentration statistical analysis

The atmospheric concentrations of benzene, toluene, ethylbenzene and isomeric xylenes (BTEX) in a medium-sized town (S. Maria Capua Vetere, about 32000 inhabitants, Southern Italy) have been determined during working days and weekends in 2006. The procedure used was 24h passive adsorption by samplers distributed throughout the town followed by GC/MS analysis. On a yearly base, the arithmetic mean benzene concentrations were above the limit required by the 2000/69/CE European Directive. The Pearson correlation coefficients of the 24h geometric mean BTEX concentrations were indicative of stationary sources of toluene located in a well circumscribed area of the urban territory, active only during the working days and not officially recognized. The results highlight the effectiveness of the statistical approach used in this study for the identification of pollutant sources.     

TG, FT-IR and NMR characterization of n-C16H34 contaminated alumina and silica after mechanochemical treatment

This paper deals with the application of mechanochemistry to model systems composed of alumina or silica artificially contaminated with n-C16H34. The mechanochemical treatment was carried out by means of a ring mill for times ranging from 10 to 40h. Thermogravimetry and infrared and nuclear magnetic resonance spectroscopies were used for the characterization of the mechanochemical products. The results have indicated that, in the case of alumina, almost all the contaminant n-C16H34 undergoes a complex oxidative reaction path whose end products are strongly held on the surface. These end products are most likely made of crosslinked, partially oxidized hydrocarbon chains bond to the solid surface via COO(-) groups. In the case of silica, the hydrocarbon undergoes a different, equally complex reaction path, but to a lower extent. In this case the end products are most probably carbonylic compounds and graphitic carbon. Then, for both solid matrices, the mechanochemical treatment promotes significant modification of the chemical nature of the polluting hydrocarbon with end products much more difficult to remove from the surface. As the systems studied are models of sites contaminated by aliphatic hydrocarbon, the results are worthy of consideration in relation to the mobility of the contaminants in the environment.     

Environmental and biological monitoring of iridium in the city of Rome

The use of iridium in the latest catalytic converters to further reduce nitrogen oxide emission in the exhaust of lean-burn engines could result in increased atmospheric levels of this element in high-density vehicle traffic areas. The objective of this study is to assess environmental Ir pollution and its urinary levels in workers and an urban control group. Environmental monitoring inside a tram consisted in air samplings of total suspended particles (TSP), PM10 and PM2.5 carried out during November 2005. Urinary Ir levels were evaluated in 64 municipal tram drivers and in 58 administrative employees as controls. Quantification of Ir in air samples and urine was performed by means of Sector Field Inductively Coupled Plasma Mass Spectrometry. Means+/-standard deviation of Ir levels in TSP, in PM10 and PM2.5 fractions were 1.43+/-1.66, 0.44+/-0.27 and 0.36+/-0.19 pg m(-3), respectively. No statistically significant differences were observed among urinary Ir values in the exposed subjects and control group. The Ir levels in Rome air are still sufficiently low, even if the increased use of new Ir-based catalysts could be of some concern in the near future. The results of our study are of interest as they are a first attempt to explore airborne levels and urinary concentrations of Ir in an urban context at medium-high density of vehicle traffic. Particular attention should be given to the fact that Ir was found in the finest dust particles as the effects of fine particles containing Ir have not yet been studied.