Fly and bottom ashes from biomass combustion as cement replacing components in mortars production: Rheological behaviour of the pastes and materials compression strength

In the present research mortar pastes obtained by replacing a commercial cement with the equivalent mass of 5, 10, 20 and 30 wt.% of fly ash or bottom ash from fir chips combustion, were prepared and rheologically characterized. It was observed that the presence of ash modifies their rheological behaviour with respect to the reference blend due to the presence, in the ashes, of KCl and K₂SO₄ which cause precipitation of gypsum and portlandite during the first hydration stages of the pastes. Hydrated materials containing 5 wt.% of ash display compression strength and absorption at 28 d of same magnitude as the reference composition; conversely, progressive increase of ash cause a continuous decline of materials performances. Conversely, samples tested after 180 d display a marked decline of compression strength, as a consequence of potassium elution and consequent alkali-silica reaction against materials under curing.     

Evaluation of saline tracer performance during electrical conductivity groundwater monitoring

Saline solutions are the most commonly used hydrological tracers, because they can be easily and economically monitored by in situ instrumentation such as electrical conductivity (EC) loggers in wells or by geoelectrical measurements. Unfortunately, these low-cost techniques only provide information on the total concentration of ions in solution, i.e., they cannot resolve the ionic composition of the aqueous solution. This limitation can introduce a bias in the estimation of aquifer parameters where sorption phenomena between saline tracers and sediments become relevant. In general, only selected anions such as Cl(-) and Br(-) are recognised to be transported unretarded and they are referred to as conservative tracers or mobile anions. However, cations within the saline tracer may interact with the soil matrix through a range of processes such as ion exchange, surface complexation and via physical mass-transfer phenomena. Heterogeneous reactions with minerals or mineral surfaces may not be negligible where aquifers are composed of fine alluvial sediments. The focus of the present study was to examine and to quantify the bias between the aquifer parameters estimated during model-based interpretation of experimental data of EC measurements of saline tracer relative to the aquifer parameters found by specific measurements (i.e. via ionic chromatography, IC) of truly conservative species. To accomplish this, column displacement experiments with alluvial aquifer materials collected from the Po lowlands (Italy) were performed under water saturated conditions. The behaviour of six selected, commonly used saline tracers (i.e., LiCl, KCl, and NaCl; LiBr, KBr, and NaBr) was studied and the data analysed by inverse modelling. The results demonstrate that the use of EC as a tracer can lead to an erroneous parameterisation of the investigated porous media, if the reactions between solute and matrix are neglected. In general, errors were significant except for KCl and KBr, which is due to the weak interaction between dissolved K(+) and the sediment material. The study shows that laboratory scale pre-investigations can help with tracer selection and to optimise the concentration range targeted for in situ multilevel monitoring by unspecific geoelectrical instrumentation.     

Urinary biomarkers and low-level environmental benzene concentration: assessing occupational and general exposure

The categories of urban workers undergoing prolonged exposure to gasoline due to vehicle emissions, evaporation and traffic fumes are considered occupationally exposed to benzene, even if at low concentrations. The aim of this study was to evaluate the specificity of unmetabolized benzene excreted in urine (UBz) and S-phenylmercapturic acid (SPMA) as biomarkers of exposure to very low levels of benzene, and to study the impact of putative individual confounders like smoking and alcohol habits, co-exposure to other toxicants and body mass index on the exposure assessment. Environmental and biological monitoring of exposure to benzene were performed in 114 Urban Policemen. The mean value of UBz in non-smokers was significantly lower than in either groups of light to moderate smokers and heavy smokers (0.24, 1.82 and 2.82 microg L(-1), respectively). On the contrary, SPMA values did not discriminate exposure resulting from smoking habits. Moreover, the concentration of UBz in non-smokers appears to be correlated with environmental benzene concentration (BenzA) (R(2)=0.13, beta=0.37, p=0.002). On the other hand, no significant correlation was found between SPMA concentration (corrected for creatinine excretion and log transformed, LogSPMA) and LogBenzA (R(2)=0.003, beta=0.05, p=0.6). Our findings reinforce previous research on the use of unmetabolized urinary benzene as a specific and sensitive biomarker of low-level exposure to benzene and confirm that smoking habits strongly influence the excretion of UBz.     

Bacterial cell monitoring in wastewater treatment plants by flow cytometry.

The activated sludge process is performed by a variable and mixed community of microorganisms in an aerobic aquatic environment, in which bacteria constitute the majority and represent the main microorganisms responsible for the degradation process in a plant. In this work, we monitored bacterial charge in different wastewater treatment plants by flow cytometry, also evaluating chlorination effects on bacterial viability, both by flow cytometry and traditional plate counts. Maximum values of bacterial charge were registered in the aeration tank of all plants monitored. Cell viability did not show significant differences (p > 0.05) in samples collected in "before chlorination" and "wastewater effluent" treatment steps; this suggests that the chlorination was not able to decrease total viable bacterial charge. In this work, we discuss the need to improve microbiological analyses, both in terms of measuring other potential pathogens and of using new methodological approaches in the traditional evaluation of the microbiological quality of effluents.     

Arbuscular mycorrhizal fungi differentially affect the response to high zinc concentrations of two registered poplar clones

The effects of a high concentration of zinc on two registered clones of poplar (Populus alba Villafranca and Populus nigra Jean Pourtet), inoculated or not with two arbuscular mycorrhizal fungi (Glomus mosseae or Glomus intraradices) before transplanting them into polluted soil, were investigated, with special regard to the extent of root colonization by the fungi, plant growth, metal accumulation in the different plant organs, and leaf polyamine concentration. Zinc accumulation was lower in Jean Pourtet than in Villafranca poplars, and it was mainly translocated to the leaves; the metal inhibited mycorrhizal colonization, compromised plant growth, and, in Villafranca, altered the putrescine profile in the leaves. Most of these effects were reversed or reduced in plants pre-inoculated with G. mosseae. Results indicate that poplars are suitable for phytoremediation purposes, confirming that mycorrhizal fungi can be useful for phytoremediation, and underscore the importance of appropriate combinations of plant genotypes and fungal symbionts.     

Pyrolysis of WEEE plastics using catalysts produced from fly ash of coal gasification

Catalytic pyrolysis of thermoplastics extracted from waste electrical and electronic equipment (WEEE) was investigated using various fly ash-derived catalysts. The catalysts were prepared from fly ash by a simple method that basically includes a mechanical treatment followed by an acid or a basic activation. The synthesized catalysts were characterized using various analytical techniques. The results showed that not treated fly ash (FA) is characterized by good crystallinity, which in turn is lowered by mechanical and chemical treatment (fly ash after mechanical and acid activation, FAMA) and suppressed almost entirely down to let fly ash become completely amorphous (fly ash after mechanical and basic activation FAMB). Simultaneously, the surface area resulted increased. Subsequently, FA, FAMB and FAMA were used in the pyrolysis of a WEEE plastic sample at 400°C and their performance were compared with thermal pyrolysis at the same temperature. The catalysts principally improve the light oil yield: from 59 wt.% with thermal pyrolysis to 83 wt.% using FAMB. The formation of styrene in the oil is also increased: from 243 mg/g with thermal pyrolysis to 453 mg/g using FAMB. As a result, FAMB proved to be the best catalyst, thus producing also the lowest and the highest amount of char and gas, respectively.

Open image in new window

     

Lichens as sentinels for air pollution at remote alpine areas (Italy)

The present study was undertaken with the aim of using epiphytic lichens as sentinels for air pollution at two remote alpine sites (1,400 and 1,800 m above sea level (asl)) of NW Italy. The results indicated that the site at 1,800 m prompted for early warning indications of biological changes. Although levels of the many elements assayed in samples of the lichen Pseudevernia furfuracea (L.) Zopf, ranging from minor elements (e.g., Al) to ultra-trace (e.g., Pt), were at normal levels, indications of a slowly worsening environment were given by the lichen biodiversity and by damage to cell membranes. The analysis of Pb isotopic ratios suggested that the origin of Pb accumulated in lichens is not local, but linked to the long-range transport by air masses. It was concluded that the origin of pollutants is from air mass coming from the Po plain of Italy and from densely populated areas of Switzerland and France.     

Environmental concentrations of 3,4-methylenedioxymethamphetamine (MDMA)-induced cellular stress and modulated antioxidant enzyme activity in the zebra mussel

Recent monitoring studies showed measurable levels of the 3,4-methylenedioxymethamphetamine (MDMA) in aquatic environments. However, no information is currently available on its potential hazard to aquatic non-target organisms. The aim of this study was to investigate the potential sub-lethal effects induced by 14-day exposures to low MDMA concentrations (0.05 and 0.5 μg/L) to zebra mussel (Dreissena polymorpha) specimens through the application of a biomarker suite. The trypan blue exclusion method and the neutral red retention assay (NRRA) were used to assess MDMA cytotoxicity. The activity of superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx), and glutathione S-transferase (GST), as well as the lipid peroxidation (LPO) and protein carbonyl content (PCC), were measured as oxidative stress indexes. The single cell gel electrophoresis (SCGE) assay, the DNA diffusion assay, and the micronucleus test (MN test) were applied to investigate DNA damage, while filtration rate was measured as physiological parameter. Despite significant decrease in lysosome membrane stability, hemocyte viability and imbalances in CAT and GST activities pointed out at the end of the exposure to 0.5 μg/L, no significant variations for the other end points were noticed at both the treatments, suggesting that environmentally relevant MDMA concentrations did not induce deleterious effects to the zebra mussel.     

Assessment of compost quality for its environmentally safe use by means of an ecotoxicological test on a soil organism

A research project was carried out to evaluate toxicological effects of compost addition to agricultural soil using the earthworm Eisenia foetida (Annellida) as a representative organism of the soil fauna. Moreover, the correlation between compost biochemical stabilization and toxicity at different phases of the composting process was assessed. Samples were collected from three composting plants at three different maturation levels (beginning of the composting process, intermediate compost after bio-oxidation, and mature refined compost). Two tests were performed: a standard chronic solid-phase test and an acute solid-phase test (developed originally by the authors). In the first test, the measured end-points were mortality, growth and reproduction; while in the second test earthworms’ behavior was evaluated. The chosen compost concentrations in soil ranged from 2.5 to 100 %, with the aim of obtaining the toxicological parameters (LC50) and to mimic real agricultural dosages for the lower concentrations. Results indicated an increase in compost toxicity with greater compost concentrations; in particular, agricultural compost dosage below 10 % showed no toxicity. Moreover, toxicity did not decrease during composting; intermediate compost showed the highest LC50 values. As a consequence, no correlation was ascertained between the results of ecotoxicological analysis and waste biochemical stability parameters during the composting process.