Brazilian Amazonia: Industrial development and environmental monitoring

After a critical analysis of the strategies for conservation of the environment in Latin America and of large-scale development projects (agriculture and livestock raising, mining and electrical power plants) in the Amazon region of Brazil, this paper deals with the use of high-resolution satellite imagery for environmental monitoring. Two areas were considered in the study, Tucurui and Altamira. Spot/XS and Landsat/TM multispectral images were used, together with color aerial photographs of these areas. A computer-assisted visual interpretation procedure was employed to analyze images, and linear multispectral transformation was applied in selected subscenes in order to improve information extraction. The results indicate that high-resolution satellite imagery is generally compatible with the scale of the environmental problems in Amazonia and is a very efficient source of detailed information at a local scale on many aspects of the environment, in particular for monitoring changes over time in selected areas. Therefore, commercial satellite imagery, processed by specialized software, can accommodate a variety of analysis needs for decision makers and can also be an effective means of verification of international agreements on conservation of the environment in Amazonia.     

Timing matters when assessing dominance and chemical signatures in the paper wasp Polistes dominulus

A recent study (Izzo et al., Behav Ecol Sociobiol 64: 857–864, 2010) reported that cuticular hydrocarbons (CHCs) correlate with fertility, not dominance, in the paper wasp Polistes dominulus thus contradicting the results of recent investigations which concluded that social dominance is the main determinant for CHC signatures in this species. We suggest here that different forms of dominance in the pre-nesting and post-nesting phases caused the apparently contradictory results. Thus the assumption that dominance behaviour in the pre-nesting stage is synonymous with dominance after colony foundation is incorrect. We provide standardised definitions for forms of “dominance” observed in the P. dominulus life cycle to avoid apparent discrepancies in the future among studies dealing with the same topics in different annual stages.     

Life cycle assessment of ship-generated waste management of Luka Koper

Sea ports and the related maritime activities (e.g. shipping, shipbuilding, etc.) are one of the main driver of Europe’s growth, jobs, competitiveness and prosperity. The continuously growth of shipping sectors has however introduced some environmental concerns, particularly with respect to ship-generated waste management. The port of Koper, one of the major ports on the northern Adriatic Coast, is the focus of this study. In this paper, a life cycle assessment was performed to identify and quantify the environmental impacts caused by the ship-generated waste management of port of Koper. Carcinogens substance (e.g. dioxins) and inorganic emissions, especially heavy metals, resulted to be the most critical environmental issues, while the fossil fuels consumption is reduced by recovery of ship-generated oils. Moreover, the final treatment of ship waste was found to be critical phase of the management, and the landfill have a significant contribute to the overall environmental load. These results can be useful in the identification of the best practices and in the implementation of waste management plans in ports.     

Physiological effects of mercury in the lichens Cladonia arbuscula subsp. mitis (Sandst.) Ruoss and Peltigera rufescens (Weiss) Humb

This study aimed at investigating the cellular distribution of Hg in the lichens Cladonia arbuscula subsp. mitis and Peltigera rufescens treated with Hg²⁺ and at testing if Hg treatment affects selected physiological parameters. In both species, increasing Hg accumulation under increasing Hg supply in the treatment solutions was found. P. rufescens showed a higher intracellular accumulation. Photosynthetic parameters were negatively affected in both species, as indicated by the decrease in photosynthetic pigments content, photosynthetic efficiency and chlorophyll integrity. Cell membranes of both species endured damage as indicated by the increase in the concentration of products of lipid peroxidation and decrease in ergosterol content. Nevertheless, differences between the two species were found, suggesting a differential sensitivity to Hg.     

CO2 capture from combined cycles integrated with Molten Carbonate Fuel Cells

In this paper Molten Carbonate Fuel Cells (MCFCs) are considered for their potential application in carbon dioxide separation when integrated into natural gas fired combined cycles. The MCFC performs on the anode side an electrochemical oxidation of natural gas by means of CO₃^2? ions which, as far as carbon capture is concerned, results in a twofold advantage: the cell removes CO₂ fed at the cathode to promote carbonate ion transport across the electrolyte and any dilution of the oxidized products is avoided.The MCFC can be “retrofitted” into a combined cycle, giving the opportunity to remove most of the CO₂ contained in the gas turbine exhaust gases before they enter the heat recovery steam generator (HRSG), and allowing to exploit the heat recovery steam cycle in an efficient “hybrid” fuel cell + steam turbine configuration. The carbon dioxide can be easily recovered from the cell anode exhaust after combustion with pure oxygen (supplied by an air separation unit) of the residual fuel, cooling of the combustion products in the HRSG and water separation. The resulting power cycle has the potential to keep the overall cycle electrical efficiency approximately unchanged with respect to the original combined cycle, while separating 80% of the CO₂ otherwise vented and limiting the size of the fuel cell, which contributes to about 17% of the total power output so that most of the power capacity relies on conventional low cost turbo-machinery. The calculated specific energy for CO₂ avoided is about 4 times lower than average values for conventional post-combustion capture technology. A sensitivity analysis shows that positive results hold also changing significantly a number of MCFC and plant design parameters.     

Pyrolysis of WEEE plastics using catalysts produced from fly ash of coal gasification

Catalytic pyrolysis of thermoplastics extracted from waste electrical and electronic equipment (WEEE) was investigated using various fly ash-derived catalysts. The catalysts were prepared from fly ash by a simple method that basically includes a mechanical treatment followed by an acid or a basic activation. The synthesized catalysts were characterized using various analytical techniques. The results showed that not treated fly ash (FA) is characterized by good crystallinity, which in turn is lowered by mechanical and chemical treatment (fly ash after mechanical and acid activation, FAMA) and suppressed almost entirely down to let fly ash become completely amorphous (fly ash after mechanical and basic activation FAMB). Simultaneously, the surface area resulted increased. Subsequently, FA, FAMB and FAMA were used in the pyrolysis of a WEEE plastic sample at 400°C and their performance were compared with thermal pyrolysis at the same temperature. The catalysts principally improve the light oil yield: from 59 wt.% with thermal pyrolysis to 83 wt.% using FAMB. The formation of styrene in the oil is also increased: from 243 mg/g with thermal pyrolysis to 453 mg/g using FAMB. As a result, FAMB proved to be the best catalyst, thus producing also the lowest and the highest amount of char and gas, respectively.

Open image in new window

     

Assessment of compost quality for its environmentally safe use by means of an ecotoxicological test on a soil organism

A research project was carried out to evaluate toxicological effects of compost addition to agricultural soil using the earthworm Eisenia foetida (Annellida) as a representative organism of the soil fauna. Moreover, the correlation between compost biochemical stabilization and toxicity at different phases of the composting process was assessed. Samples were collected from three composting plants at three different maturation levels (beginning of the composting process, intermediate compost after bio-oxidation, and mature refined compost). Two tests were performed: a standard chronic solid-phase test and an acute solid-phase test (developed originally by the authors). In the first test, the measured end-points were mortality, growth and reproduction; while in the second test earthworms’ behavior was evaluated. The chosen compost concentrations in soil ranged from 2.5 to 100 %, with the aim of obtaining the toxicological parameters (LC50) and to mimic real agricultural dosages for the lower concentrations. Results indicated an increase in compost toxicity with greater compost concentrations; in particular, agricultural compost dosage below 10 % showed no toxicity. Moreover, toxicity did not decrease during composting; intermediate compost showed the highest LC50 values. As a consequence, no correlation was ascertained between the results of ecotoxicological analysis and waste biochemical stability parameters during the composting process.     

Lichens as sentinels for air pollution at remote alpine areas (Italy)

The present study was undertaken with the aim of using epiphytic lichens as sentinels for air pollution at two remote alpine sites (1,400 and 1,800 m above sea level (asl)) of NW Italy. The results indicated that the site at 1,800 m prompted for early warning indications of biological changes. Although levels of the many elements assayed in samples of the lichen Pseudevernia furfuracea (L.) Zopf, ranging from minor elements (e.g., Al) to ultra-trace (e.g., Pt), were at normal levels, indications of a slowly worsening environment were given by the lichen biodiversity and by damage to cell membranes. The analysis of Pb isotopic ratios suggested that the origin of Pb accumulated in lichens is not local, but linked to the long-range transport by air masses. It was concluded that the origin of pollutants is from air mass coming from the Po plain of Italy and from densely populated areas of Switzerland and France.