Study of fluxing in Al refining process by rotary and crucible furnaces

The process used to obtain recycled Al alloys depends on the scrap quality. Rotary furnaces are normally used in Europe as they allow a great productivity and they can process low quality scrap using a salt flux to protect the molten metal from oxidation. In this article, the effect of the quantity of salt on the metal recovery has been experimentally investigated by melting several types of scrap under a mixture of NaCl–KCl–Na₃AlF₆ salts. The quantity of salt has been related to the salt factor (SF), which is the ratio between the non-metallic content in the scrap and the quantity of salt required. The same levels of salt factor have been tested by melting the scrap in rotary and crucible furnaces. The metal recovery increases with the salt content for both furnaces. The results obtained with the different melting processes are comparable because the yield difference is similar considering different salt factors. Crucible furnace gives greater metal recovery but it cannot replace rotary furnace in Al refining industry due to lower melting capacity. However, the results highlight that the optimisation of the Al refining process can be supported by preliminary tests through crucible furnaces reducing the time and material consumptions.     

Biological effects of ammonia released from a composting plant assessed with lichens

In this study, we investigated whether ammonia emissions from industrial composting of organic waste may influence the surrounding environment, using lichens as bioindicators. To this purpose, samples of N-tolerant and N-sensitive lichens, namely Xanthoria parietina and Evernia prunastri, were transplanted for 1–3 months along transects at increasing distance (0–400 m) from a composting facility in Tuscany, Italy. Atmospheric concentrations of ammonia were measured using passive samplers. The physiological response of lichen transplants was investigated by means of the photosynthetic efficiency (measured as chlorophyll a fluorescence emission), the integrity of cell membranes (measured as electrolyte leakage), and sample viability (measured as enzymatic activity of dehydrogenase). Epiphytic lichen communities were investigated using biodiversity indices. The results showed decreasing concentrations of ammonia, from 48.7 μg/m³ at the composting facility to 2.7 μg/m³ at 400 m. The N-tolerant X. parietina was not affected and some physiological parameters even showed a higher performance, while the N-sensitive E. prunastri showed a reduced performance with increasing atmospheric concentrations approaching the source. A shift from lichen communities composed by meso-acidophilous species (actual condition) to more nitrophilous communities in the near future, approaching the composting facility is suggested. It is concluded that lichens can provide useful data for decision-makers to establish correct science-based environmentally sustainable waste management policies.     

21,000 Years of Ethiopian African monsoon variability recorded in sediments of the western Nile deep-sea fan

The Nile delta sedimentation constitutes a continuous high-resolution record of Ethiopian African monsoon (EAM) regime intensity. Multi-proxy analyses performed on hemipelagic sediments deposited on the Nile deep-sea fan allow the quantification of the Saharan aeolian dust and the Blue/White Nile River suspended matter frequency fluctuations during the last 21,000 years. The radiogenic strontium and neodymium isotopes, clay mineralogy, elemental composition and preliminary palynological analyses reveal large changes in source components, oscillating between a dominant aeolian Saharan contribution during the Last Glacial Maximum (LGM) and the late Holocene (~4,000–2,000 years), a dominant Blue/Atbara Nile River contribution during the early Holocene (15,000–8,000 years) and a probable White Nile River contribution during the middle Holocene (8,000–4,000 years). The following main features are highlighted: (1) The rapid shift from the LGM arid conditions to the African Humid Period (AHP) started at about 15,000 years. The AHP extends until 8,000 years, and we suggest that the EAM maximum between 15,000 and 8,000 years is responsible for a larger Blue/Atbara Nile sediment load and freshwater input into the eastern Mediterranean Sea. (2) The transition between the AHP and the arid late Holocene is gradual and occurs in two main phases between 8,400–6,500 years and 6,500–3,200 years. We suggest that the main rain belt shifted southward from 8,000 to ~4,000 years and was responsible for progressively reduced sediment load and freshwater input into the eastern Mediterranean Sea. (3) The aridification along the Nile catchments occurred from ~4,000 to 2,000 years. This dry period, which culminates at 3,200 year, seems to coincide with a re-establishment of increased oceanic primary productivity in the western Mediterranean Sea. Such a pattern imposes a large and rapid northward shift of the rain belt over the Ethiopian highlands (5–15°N) since 15,000 years. Precipitation over Ethiopia increased from 15,000 to 8,000 years. It was followed by a gradual southward shift of the rain belt over the equator from 8,000 to 4,000 years and finally a large shift of the rain belt south the equator between 4,000 and 2,000 years inducing North African aridification. We postulate that the decrease in thermohaline water Mediterranean circulation could be part of a response to huge volumes of freshwater delivered principally by the Nile River from 15,000 to 8,000 years in the eastern Mediterranean.     

Challenges in assessing the environmental consequences of dietary changes

Tom et al. (Environ Syst Decis 1–12, 2015) compared the energy requirements, water footprint, and greenhouse gas emissions of diet regimens recently recommended by the US Department of Agriculture. This editorial comments on a number of challenges related to the use of the results of life-cycle assessment studies to quantify the environmental impacts of dietary shifts.     

Choosing an Aerometric Data System

The air quality of an urban area depends to a great extent upon the quantity and type of fuel consumed. Thus, a marked change in energy demand from 1960 to 2000 A.D. will affect the air quality of all of our urban centers. Interwoven with this potential effect is the anticipated influence of the change in type and quality of fuels, e.g., nuclear fuels, high sulfur coals, and a major modification in energy derived motive power, i.e., fuel cells, and the subsequent depletion of natural gas as an energy raw material. The current trend is to greater urban population densities, and it is estimated that by the year 2000 A.D., 85 percent of America’s population will live on only 10 percent of the land mass. To assess the potential impact of the energy demands for the next half century on air quality, particularly of America’s urban centers, a review of current practices of combustion of coal, petroleum, and natural gas, and the potential effect on community air quality will be developed. To meet the impact of the interrelated changing patterns of population growth, urban developments, energy requirements and available sources, research needs on both a short and long term basis will be explored.     

Lake Temperature and Ice Cover Regimes in the Alaskan Subarctic and Arctic: Integrated Monitoring,Remote Sensing,and Modeling1

Arp, C.D., B.M. Jones, M. Whitman, A. Larsen, and F.E. Urban, 2010. Lake Temperature and Ice Cover Regimes in the Alaskan Subarctic and Arctic: Integrated Monitoring, Remote Sensing, and Modeling. Journal of the American Water Resources Association (JAWRA) 46(4): 777-791. DOI: 10.1111/j.1752-1688.2010.00451.x Abstract: Lake surface regimes are fundamental attributes of lake ecosystems and their interaction with the land and atmosphere. High latitudes may be particularly sensitive to climate change, however, adequate baselines for these lakes are often lacking. In this study, we couple monitoring, remote sensing, and modeling techniques to generate baseline datasets of lake surface temperature and ice cover in the Alaskan Subarctic and Arctic. No detectable trends were observed during this study period, but a number of interesting patterns were noted among lakes and between regions. The largest Arctic lake was relatively unresponsive to air temperature, while the largest Subarctic lake was very responsive likely because it is fed by glacial runoff. Mean late summer water temperatures were higher than air temperatures with differences ranging from 1.7 to 5.4°C in Subarctic lakes and from 2.4 to 3.2°C in Arctic lakes. The warmest mean summer water temperature in both regions was in 2004, with the exception of Subarctic glacially fed lake that was highest in 2005. Ice-out timing had high coherence within regions and years, typically occurring in late May in Subarctic and in early-July in Arctic lakes. Ice-on timing was more dependent on lake size and depth, often varying among lakes within a region. Such analyses provide an important baseline of lake surface regimes at a time when there is increasing interest in high-latitude water ecosystems and resources during an uncertain climate future.     

Metrics for integrating sustainability evaluations into remediation projects

The US Sustainable Remediation Forum (SURF) created a compilation of metrics (Metrics Toolbox) in response to a need for a broad set of metrics that could be used to assess and monitor the effectiveness of remedies in achieving sustainability goals. Metrics are the key impacts, outcomes, or burdens that are to be assessed or balanced to determine the influences and impacts of a remedial action. Metrics can reflect any of the three aspects of sustainability (i.e., environmental, social, or economic) or a combination of these aspects. Regardless, metrics represent the most critical sustainable outcomes from the perspective of the key stakeholders. The Metrics Toolbox is hosted online at www.sustainableremediation.org/library/guidance‐tools‐and‐other‐resources . By selecting metrics from the Metrics Toolbox as a starting point and considering a potentially wider suite of metrics in remedial program decisions, appropriate assessments can be made. Qualitative and quantitative metrics are tabulated for each remedial phase: remedial investigation, remedy selection, remedial design, remedial construction, operation and maintenance, and closure. Attributes for each metric are described so that remediation practitioners and key stakeholders can view the universe of metrics available and select the most relevant, site‐specific metrics for a particular site. For this reason, SURF recommends that remediation practitioners consider the metrics compiled in the Metrics Toolbox as a companion to the sustainable remediation framework published elsewhere in this journal and other sustainability evaluations. © 2011 Wiley Periodicals, Inc.     

Vertical distribution of hydrocarbons in the low troposphere below and above the mixing height: tethered balloon measurements in Milan, Italy

A novel approach for measuring vertical profiles of HCs and particle number concentrations was described and applied in the low troposphere over Milan (Italy) during typical spring and summer days. Particle profiles yielded nearly homogeneous concentrations below the mixing height, with level-to-ground concentration ratios of 92-97%, while HCs showed a more pronounced decrease (74-95%). Vertical mixing and photochemical loss of HCs were demonstrated to cause these gradients. Much lower concentrations were observed for the profiles above the mixing height, where the HC mixtures showed also a different composition, which was partially explained by the horizontal advection of air with HC sources different to those prevailing at the site. The application of pseudo-first order kinetics for reactions between HCs and the hydroxyl radical allowed for the estimation of the vertical mixing time scale in the order of 100 ± 20 min.     

Environmental release and mass flux partitioning of PCDD/Fs during normal and transient operation of full scale waste to energy plants

The paper reports on global release and mass partitioning in the flux of residues of PCDD/Fs, evaluated with dedicated field campaigns at a municipal solid waste incineration plant during normal and transient operation. Results are compared with those obtained in other installations equipped with furnaces, energy recovery options and flue gas treatment technologies representative of most of the European incineration plants currently in operation. Levels of the pollutants of interest were determined in all the solid, liquid and gaseous residues produced by every single facility, and the results analysed in terms of the effects arising from the fed waste and the configuration of the plant. PCDD/Fs total release between 1.5 and 45 microg I-TEQ per ton of burned waste was evaluated, with lower values resulting from the adoption of catalytic conversion process for flue gas treatment. Most of the mass flux emitted is associated with solid residues deriving from activated carbon PCCD/F dry removal options, with significant contributions also from fly ash produced by particulate removal devices located immediately downstream the boiler and from scrubber blowdowns treatment sludge. During transient operating conditions the dioxin total release may increase by 50% with comparison to steady-state functioning.     

Evaluation of the impact on entomocoenosis of active agents allowed in organic olive farming against Bactrocera oleae (Gmelin, 1790)

Several attempts for evaluating environmental impact of active agents allowed in organic olive farming against Bactrocera oleae have been made, but very few studies were performed contemporaneously on more than one of them. Insects were chosen as indicators because they are known to react very quickly to environmental perturbations, mainly at the community level. In fact, the coenosis is the functional unit interacting with biotic and abiotic environmental parameters. Seven taxa, known for their sensitivity to habitat alterations, were sampled and grouped in functional groups: predators and parasitoids, phytophagouses and pollinators. The coenotic balance between these two functional groups was analyzed. The study was carried out in an organic olive orchard in the municipality of Terranova da Sibari, Cosenza, Southern Italy. The tested active agents (Azadirachtin, Rotenone, Copper Oxychloride) were sprayed twice (end of September and middle October). During the treatments the population dynamics of all the taxa were knocked-down. No one tested compound seems to be harmless to the entomocoenosis, particularly on phytophagouses and pollinators. In truly organic farming it is necessary to provide natural refuge areas to beneficial insects (i.e. pest antagonists) in which no active agents are sprayed and alternative preys could be found.