Fly and bottom ashes from biomass combustion as cement replacing components in mortars production: Rheological behaviour of the pastes and materials compression strength

In the present research mortar pastes obtained by replacing a commercial cement with the equivalent mass of 5, 10, 20 and 30 wt.% of fly ash or bottom ash from fir chips combustion, were prepared and rheologically characterized. It was observed that the presence of ash modifies their rheological behaviour with respect to the reference blend due to the presence, in the ashes, of KCl and K₂SO₄ which cause precipitation of gypsum and portlandite during the first hydration stages of the pastes. Hydrated materials containing 5 wt.% of ash display compression strength and absorption at 28 d of same magnitude as the reference composition; conversely, progressive increase of ash cause a continuous decline of materials performances. Conversely, samples tested after 180 d display a marked decline of compression strength, as a consequence of potassium elution and consequent alkali-silica reaction against materials under curing.     

Evaluation of saline tracer performance during electrical conductivity groundwater monitoring

Saline solutions are the most commonly used hydrological tracers, because they can be easily and economically monitored by in situ instrumentation such as electrical conductivity (EC) loggers in wells or by geoelectrical measurements. Unfortunately, these low-cost techniques only provide information on the total concentration of ions in solution, i.e., they cannot resolve the ionic composition of the aqueous solution. This limitation can introduce a bias in the estimation of aquifer parameters where sorption phenomena between saline tracers and sediments become relevant. In general, only selected anions such as Cl(-) and Br(-) are recognised to be transported unretarded and they are referred to as conservative tracers or mobile anions. However, cations within the saline tracer may interact with the soil matrix through a range of processes such as ion exchange, surface complexation and via physical mass-transfer phenomena. Heterogeneous reactions with minerals or mineral surfaces may not be negligible where aquifers are composed of fine alluvial sediments. The focus of the present study was to examine and to quantify the bias between the aquifer parameters estimated during model-based interpretation of experimental data of EC measurements of saline tracer relative to the aquifer parameters found by specific measurements (i.e. via ionic chromatography, IC) of truly conservative species. To accomplish this, column displacement experiments with alluvial aquifer materials collected from the Po lowlands (Italy) were performed under water saturated conditions. The behaviour of six selected, commonly used saline tracers (i.e., LiCl, KCl, and NaCl; LiBr, KBr, and NaBr) was studied and the data analysed by inverse modelling. The results demonstrate that the use of EC as a tracer can lead to an erroneous parameterisation of the investigated porous media, if the reactions between solute and matrix are neglected. In general, errors were significant except for KCl and KBr, which is due to the weak interaction between dissolved K(+) and the sediment material. The study shows that laboratory scale pre-investigations can help with tracer selection and to optimise the concentration range targeted for in situ multilevel monitoring by unspecific geoelectrical instrumentation.     

Urinary biomarkers and low-level environmental benzene concentration: assessing occupational and general exposure

The categories of urban workers undergoing prolonged exposure to gasoline due to vehicle emissions, evaporation and traffic fumes are considered occupationally exposed to benzene, even if at low concentrations. The aim of this study was to evaluate the specificity of unmetabolized benzene excreted in urine (UBz) and S-phenylmercapturic acid (SPMA) as biomarkers of exposure to very low levels of benzene, and to study the impact of putative individual confounders like smoking and alcohol habits, co-exposure to other toxicants and body mass index on the exposure assessment. Environmental and biological monitoring of exposure to benzene were performed in 114 Urban Policemen. The mean value of UBz in non-smokers was significantly lower than in either groups of light to moderate smokers and heavy smokers (0.24, 1.82 and 2.82 microg L(-1), respectively). On the contrary, SPMA values did not discriminate exposure resulting from smoking habits. Moreover, the concentration of UBz in non-smokers appears to be correlated with environmental benzene concentration (BenzA) (R(2)=0.13, beta=0.37, p=0.002). On the other hand, no significant correlation was found between SPMA concentration (corrected for creatinine excretion and log transformed, LogSPMA) and LogBenzA (R(2)=0.003, beta=0.05, p=0.6). Our findings reinforce previous research on the use of unmetabolized urinary benzene as a specific and sensitive biomarker of low-level exposure to benzene and confirm that smoking habits strongly influence the excretion of UBz.     

Bacterial cell monitoring in wastewater treatment plants by flow cytometry.

The activated sludge process is performed by a variable and mixed community of microorganisms in an aerobic aquatic environment, in which bacteria constitute the majority and represent the main microorganisms responsible for the degradation process in a plant. In this work, we monitored bacterial charge in different wastewater treatment plants by flow cytometry, also evaluating chlorination effects on bacterial viability, both by flow cytometry and traditional plate counts. Maximum values of bacterial charge were registered in the aeration tank of all plants monitored. Cell viability did not show significant differences (p > 0.05) in samples collected in "before chlorination" and "wastewater effluent" treatment steps; this suggests that the chlorination was not able to decrease total viable bacterial charge. In this work, we discuss the need to improve microbiological analyses, both in terms of measuring other potential pathogens and of using new methodological approaches in the traditional evaluation of the microbiological quality of effluents.     

Arbuscular mycorrhizal fungi differentially affect the response to high zinc concentrations of two registered poplar clones

The effects of a high concentration of zinc on two registered clones of poplar (Populus alba Villafranca and Populus nigra Jean Pourtet), inoculated or not with two arbuscular mycorrhizal fungi (Glomus mosseae or Glomus intraradices) before transplanting them into polluted soil, were investigated, with special regard to the extent of root colonization by the fungi, plant growth, metal accumulation in the different plant organs, and leaf polyamine concentration. Zinc accumulation was lower in Jean Pourtet than in Villafranca poplars, and it was mainly translocated to the leaves; the metal inhibited mycorrhizal colonization, compromised plant growth, and, in Villafranca, altered the putrescine profile in the leaves. Most of these effects were reversed or reduced in plants pre-inoculated with G. mosseae. Results indicate that poplars are suitable for phytoremediation purposes, confirming that mycorrhizal fungi can be useful for phytoremediation, and underscore the importance of appropriate combinations of plant genotypes and fungal symbionts.     

Nutrient and Sediment Production,Watershed Characteristics,and Land Use in the Tahoe Basin,California‐Nevada1

Abstract: In efforts to control the degradation of water quality in Lake Tahoe, public agencies have monitored surface water discharge and concentrations of nitrogen, phosphorus, and suspended sediment in two separate sampling programs. The first program focuses on 20 watersheds varying in size from 162 to 14,000 ha, with continuous stream gaging and periodic sampling; the second focuses on small urbanized catchments, with automated sampling during runoff events. Using data from both programs, we addressed the questions (1) what are the fluxes and concentrations of nitrogen and phosphorus entering the lake from surface runoff; (2) how do the fluxes and concentrations vary in space and time; and (3) how are they related to land use and watershed characteristics? To answer these questions, we calculated discharge‐weighted average concentrations and annual fluxes and used multiple regression to relate those variable to a suite of GIS‐derived explanatory variables. The final selected regression models explain 47‐62% of the variance in constituent concentrations in the stormwater monitoring catchments, and 45‐72% of the variance in mean annual yields in the larger watersheds. The results emphasize the importance of impervious surface and residential density as factors in water quality degradation, and well‐developed soil as a factor in water quality maintenance.     

Pyrolysis of WEEE plastics using catalysts produced from fly ash of coal gasification

Catalytic pyrolysis of thermoplastics extracted from waste electrical and electronic equipment (WEEE) was investigated using various fly ash-derived catalysts. The catalysts were prepared from fly ash by a simple method that basically includes a mechanical treatment followed by an acid or a basic activation. The synthesized catalysts were characterized using various analytical techniques. The results showed that not treated fly ash (FA) is characterized by good crystallinity, which in turn is lowered by mechanical and chemical treatment (fly ash after mechanical and acid activation, FAMA) and suppressed almost entirely down to let fly ash become completely amorphous (fly ash after mechanical and basic activation FAMB). Simultaneously, the surface area resulted increased. Subsequently, FA, FAMB and FAMA were used in the pyrolysis of a WEEE plastic sample at 400°C and their performance were compared with thermal pyrolysis at the same temperature. The catalysts principally improve the light oil yield: from 59 wt.% with thermal pyrolysis to 83 wt.% using FAMB. The formation of styrene in the oil is also increased: from 243 mg/g with thermal pyrolysis to 453 mg/g using FAMB. As a result, FAMB proved to be the best catalyst, thus producing also the lowest and the highest amount of char and gas, respectively.

Open image in new window

     

Determining Reduced-Emission Goals Needed to Achieve Air Quality Goals— A Hypothetical Case

Air management steps involved in determining reduced-emission goals include determining the effects of various pollutant concentrations on man, animals, plants, and property; deciding which effects to prevent; selecting ambient air quality goals that will prevent these effects; measuring and evaluating pollutant concentrations from sources and in the ambient atmosphere; calculating over-all source reductions needed to achieve selected ambient air quality goals; and finally, determining reduced-emission goals for the various source types. Examples are cited of the various decisions and actions involved in determining a set of reduced-emission goals for stationary and mobile combustion sources.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 3. Vegetation Injury

Acute leaf injury data are analyzed for 19 plant species exposed to ozone or sulfur dioxide. The data can be depicted by a new leaf injury mathematical model with two characteristics: (1) a constant percentage of leaf surface is injured by an air pollutant concentration that is inversely proportional to exposure duration raised to an exponent; (2) for a given exposure duration, the percent leaf injury as a function of pollutant concentration tends to fit a lognormal frequency distribution. Leaf injury as a function of laboratory exposure duration is modeled and compared with ambient air pollutant concentration measurements for various averaging times to determine which exposure durations are probably most important for setting ambient air quality standards to prevent or reduce visible leaf injury. The 8 hour average appears to be most important for most of the plants investigated for most sites, 1 hr concentrations are important for most plants at a few sites, and 3 hr S0₂ concentrations are important for some plants, especially those exposed to isolated point sources of the pollutant. The 1, 3, and 8 hr threshold injury concentrations are listed for each of the 19 plant species studied. To prevent or reduce acute leaf injury, fixed, nonoverlapping ambient air quality measurements and standards are recommended for averaging times of 1, 3, and 8hr.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 8. An Effective Mean O3 Crop Reduction Mathematical Model

A plant injury mathematical model, applied previously to acute and chronic leaf injury data, is used here to model National Crop Loss Assessment Network (NCLAN) data for 15 cultivars and to calculate species parameters from the cultivar analyses. Percent crop yield reduction is estimated as a function of a new parameter, the effective mean O₃ concentration: m_e = [(Σ c_h ^?1/v)/n]^?v, where c_h is the hourly average ambient O₃ concentration for each daytime hour (defined here as 9:00 A.M.–4:00 P.M., always standard time) of data available at an air sampling site for summer (defined here as June 1–August 31), n is the total number of such available hours, and v is an exposure time-concentration parameter, calculated here to be approximately –0.376. Crop yield reduction for soybean is calculated here as z = 0.478 In (tm_e ^2-66) – 0.42, where z is the Gaussian transform of percent crop reduction, t is the hours of exposure (525 h is used here; 7 h/day for 75 days), and In indicates that the natural logarithm is taken of the quantity within parentheses. Crop yield reductions for seven plant species are estimated with similar equations for each of the 1824 site-years of 1981–1983 hourly O₃ concentration data available in the National Aerometric Data Bank (NADB). County-average effective mean O₃ concentrations are indicated by shading on a U.S. map. State-average O₃ parameters and estimated percent crop yield reductions are tabulated. The National Ambient Air Quality Standard (NAAQS) for O₃ specifies that, on the average, the second highest daily maximum 1-h average O₃ concentration in a year shall not exceed 0.12 ppm. For years 1981-1983,71% of the NADB sites recorded annual second highest daily maximum 1-h average O3 concentrations below 0.125 ppm (for summer daytime hours). Ambient O₃ concentrations reduced the total U.S. crop yield an estimated 5% for years 1981–1983. (Summer, daytime, and all acronyms are always used herein as defined above.)