Improvements to lawn and garden equipment emissions estimates for Baltimore, Maryland

Lawn and garden equipment are a significant source of emissions of volatile organic compounds (VOCs) and other pollutants in suburban and urban areas. Emission estimates for this source category are typically prepared using default equipment populations and activity data contained in emissions models such as the U.S. Environmental Protection Agency's (EPA) NONROAD model or the California Air Resources Board's (CARB) OFFROAD model. Although such default data may represent national or state averages, these data are unlikely to reflect regional or local differences in equipment usage patterns because of variations in climate, lot sizes, and other variables. To assess potential errors in lawn and garden equipment emission estimates produced by the NONROAD model and to demonstrate methods that can be used by local planning agencies to improve those emission estimates, this study used bottom-up data collection techniques in the Baltimore metropolitan area to develop local equipment population, activity, and temporal data for lawn and garden equipment in the area. Results of this study show that emission estimates of VOCs, particulate matter (PM), carbon monoxide (CO), carbon dioxide (CO2), and nitrogen oxides (NO(x)) for the Baltimore area that are based on local data collected through surveys of residential and commercial lawn and garden equipment users are 24-56% lower than estimates produced using NONROAD default data, largely because of a difference in equipment populations for high-usage commercial applications. Survey-derived emission estimates of PM and VOCs are 24 and 26% lower than NONROAD default estimates, respectively, whereas survey-derived emission estimates for CO, CO2, and NO(x) are more than 40% lower than NONROAD default estimates. In addition, study results show that the temporal allocation factors applied to residential lawn and garden equipment in the NONROAD model underestimated weekend activity levels by 30% compared with survey-derived temporal profiles.     

Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery1

Claggett, Peter R., Judy A. Okay, and Stephen V. Stehman, 2010. Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery. Journal of the American Water Resources Association (JAWRA) 46(2):334-343. DOI: 10.1111/j.1752-1688.2010.00424.x Abstract: The Chesapeake Bay watershed encompasses 165,760 km² of land area with 464,098 km of rivers and streams. As part of the Chesapeake Bay restoration effort, state and federal partners have committed to restoring 26,000 miles (41,843 km) of riparian forest buffers. Monitoring trends in riparian forest buffers over large areas is necessary to evaluate the efficacy of these restoration efforts. A sampling approach for estimating change in riparian forest cover from 1993/1994 to 2005 was developed and implemented in Anne Arundel County, Maryland, to exemplify a method that could be applied throughout the Bay watershed. All stream reaches in the county were stratified using forest cover change derived from Landsat imagery. A stratified random sample of 219 reaches was selected and forest cover change within the riparian buffer of each sampled reach was interpreted from high-resolution aerial photography. The estimated footprint of gross change in riparian forest cover (i.e., the sum of gross gain and gross loss) for the county was 1.83% (SE = 0.22%). Stratified sampling taking advantage of a priori knowledge of locations of change proved to be a practical and efficient protocol for estimating riparian forest buffer change at the county scale and the protocol would readily extend to much broader scale monitoring.     

Distribution and ecological risk of organochlorine pesticides and polychlorinated biphenyls in sediments from the Mediterranean coastal environment of Egypt

Organochlorine contamination in the Mediterranean coastal environment of Egypt was assessed based on 26 surface sediments samples collected from several locations on the Egyptian coast, including harbors, coastal lakes, bays, and estuaries. The distribution and potential ecological risk of contaminants is described. Organochlorine compounds (OCs) were widely distributed in the coastal environment of Egypt. Concentrations of PCBs, DDTs, and chloropyrifos ranged from 0.29 to 377 ng g⁻¹ dw, 0.07 to 81.5 ng g⁻¹ dw, and below the detection limit (DL) to 288 ng g⁻¹ dw, respectively. Other organochlorinated pesticides (OCP) studied were 1–2 orders of magnitude lower. OCP and PCBs had higher concentrations at Burullus Lake, Abu Qir Bay, Alexandria Eastern Harbor, and El Max Bay compared to other sites. OCP and PCB contamination is higher in the vicinity of possible input sources such as shipping, industrial activities and urban areas. PCB congener profiles indicated they were derived from more than one commercially available mixture. The ratios of commercial chlordane and heptachlor metabolites indicate historical usage; however, DDT and HCHs inputs at several locations appear to be from recent usage. The concentrations of PCBs and DDTs are similar to those observed in sediments from coastal areas of the Mediterranean Sea. Ecotoxicological risk from DDTs and PCBs is greatest in Abu Qir Bay, Alexandria Harbor, and El-Max Bay.     

Smokeless Stacks—Industry’s Big Problem

There seems to be a general impression on the part of the public and many technical people that dust collecting systems on the open hearth furnace are simply a matter of giving a contract for a duplicate system to that previously installed; signing a check for a sum to cover the cost of the cleaning equipment itself, pressing the start-up button and then sitting back to receive the plaudits of a grateful community. This paper will briefly present some of the problems common to all of the installations to date. It will also explain why the cost of the cleaning equipment itself is such a small portion of the total cost.     

The Effect of Building Fan Operation on Indoor-Outdoor Dust Relationships

As part of an energy conservation program recently implemented by the Bell System, fans in many telephone equipment buildings now operate only when necessary to bring the temperature within allowable limits, rather than continuously. In the study reported here the effects of fan operation on indoor-outdoor dust relationships were monitored at 2 representative telephone offices. Automatic dichotomous samplers were used to collect fine and coarse aerosol particles inside telephone equipment buildings at Wichita, KS and Lubbock, TX. At both sites, outdoor samples (roof top) were collected at the same time as the indoor samples. During the tests the building fans were repetitively cycled between 2-week intervals of continuous fan operation and 2-week intervals of intermittent fan operation. The indoor dust concentrations typically increased when the fans were off. The results indicate that this increase was due to loss of constant filtration, but not due to loss of building pressurlzation (i.e., filtration of the recirculated air is largely responsible for the lower dust levels when the fans are running continuously). An expression is derived for the relative dust increase when the building fans are switched off. Among other factors, the relative increase is directly proportional to the efficiency of the building filters and to the rate at which air is recirculated through them. The present findings can be extended to similar buildings.     

Environmental Auditing—A Timely and Effective Tool

The requirements of environmental regulations imposed on industry are complex and expensive. As these regulations have developed, corporate compliance programs have had to become more sophisticated. For many, this means that an environmental auditing program is now timely (or overdue) for organizing their approach to meeting the constraints of these regulations. Contributing to this timeliness is a renewed emphasis by regulators on enforcement activities. This paper discusses what environmental auditing is and what it consists of, gives examples from a few approaches which are currently being used, and reviews some of its benefits and liabilities.     

Intermittent agitation of liquid manure: effects on methane,microbial activity,and temperature in a farm-scale study

Liquid manure storages are a significant source of methane (CH₄) emissions. Farmers commonly agitate (stir) liquid manure prior to field application to homogenize nutrients and solids. During agitation, manure undergoes mechanical stress and is exposed to the air, disrupting anaerobic conditions. This on-farm study aimed to better understand the effects of agitation on CH₄ emissions, and explore the potential for intentional agitation (three times) to disrupt the exponential increase of CH₄ emissions in spring and summer. Results showed that agitation substantially increased manure temperature in the study year compared to the previous year, particularly at upper- and mid-depths of the stored manure. The temporal pattern of CH₄ emissions was altered by reduced emissions over the subsequent week, followed by an increase during the second week. Microbial analysis indicated that the activity of archaea and methanogens increased after each agitation event, but there was little change in the populations of methanogens, archaea, and bacteria. Overall, CH₄ emissions were higher than any of the previous three years, likely due to warmer manure temperatures that were higher than the previous years (despite similar air temperatures). Therefore, intermittent manure agitation with the frequency, duration, and intensity used in this study is not recommended as a CH₄ emission mitigation practice.

Implications: The potential to mitigate methane emissions from liquid manure storages by strategically timed agitation was evaluated in a detailed farm-scale study. Agitation was conducted with readily-available farm equipment, and targeted at the early summer to disrupt methanogenic communities when CH₄ emissions increase exponentially. Methane emissions were reduced for about one week after agitation. However, agitation led to increased manure temperature, and was associated with increased activity of methanogens. Overall, agitation was associated with similar or higher methane emissions. Therefore, agitation is not recommended as a mitigation strategy.     

Effect of fresh green waste and green waste compost on mineral nitrogen, nitrous oxide and carbon dioxide from a Vertisol

Incorporation of organic waste amendments to a horticultural soil, prior to expected risk periods, could immobilise mineral N, ultimately reducing nitrogen (N) losses as nitrous oxide (N₂O) and leaching. Two organic waste amendments were selected, a fresh green waste (FGW) and green waste compost (GWC) as they had suitable biochemical attributes to initiate N immobilisation into the microbial biomass and organic N forms. These characteristics include a high C:N ratio (FGW 44:1, GWC 35:1), low total N (<1%), and high lignin content (>14%). Both products were applied at 3 t C/ha to a high N (plus N fertiliser) or low N (no fertiliser addition) Vertisol soil in PVC columns. Cumulative N₂O production over the 28 day incubation from the control soil was 1.5 mg/N₂O/m², and 11 mg/N₂O/m² from the control + N. The N₂O emission decreased with GWC addition (P < 0.05) for the high N soil, reducing cumulative N₂O emissions by 38% by the conclusion of the incubation. Analysis of mineral N concentrations at 7, 14 and 28 days identified that both FGW and GWC induced microbial immobilisation of N in the first 7 days of incubation regardless of whether the soil environment was initially high or low in N; with the FGW immobilising up to 30% of available N. It is likely that the reduced mineral N due to N immobilisation led to a reduced substrate for N₂O production during the first week of the trial, when soil N₂O emissions peaked. An additional finding was that FGW + N did not decrease cumulative N₂O emissions compared to the control + N, potentially due to the fact that it stimulated microbial respiration resulting in anaerobic micro sites in the soil and ultimately N₂O production via denitrification. Therefore, both materials could be used as post harvest amendments in horticulture to minimise N loss through nitrate-N leaching in the risk periods between crop rotations. The mature GWC has potential to reduce N₂O, an important greenhouse gas.     

Investigation of PM2.5 pollution during COVID-19 pandemic in Guangzhou, China

The COVID-19 pandemic has raised awareness about various environmental issues,including PM_2.5 pollution.Here,PM_2.5 pollution during the COVID-19 lockdown was traced and analyzed to clarify the sources and factors influencing PM_2.5 in Guangzhou,with an emphasis on heavy pollution.The lockdown led to large reductions in industrial and traffic emissions,which significantly reduced PM_2.5 concentrations in Guangzhou.Interestingly,the trend of PM_2.5