Specific Conductance and pH as Indicators of Watershed Disturbance in Streams of the New Jersey Pinelands, USA

/ We used linear regression to independently and jointly relate specific conductance and pH measured at New Jersey Pinelands stream sites to the percentage of altered land in a watershed. Percentage altered land included developed and agricultural land uses and represented watershed disturbance for a given site. Median values calculated for a 2-year period (September 1992 through August 1994) characterized pH and specific conductance at the study sites. We found the relationships between the median values for both water-quality measures and percentage altered land for a site to be consistent across subregion and dominant altered-land use. Our results also demonstrated that the water-quality/altered-land relationships developed using median values were similar to relationships developed using data from any single-sample period within the entire study period. Individually, pH and specific conductance explained 48% and 56%, respectively, of the variability in watershed disturbance among study sites. The joint use of pH and specific conductance explained 79% of the watershed disturbance variability among sites. The joint use of these easily obtained water-quality measures can provide a quick assessment of instream water-quality impacts from upstream watershed disturbance at any Pinelands stream site. Additionally, a range in pH and specific conductance, and hence a range in ambient water quality, can be predicted for a given altered-land percentage or a change in existing altered-land conditions.     

Locational Probability for a Dammed, Urbanizing Stream: Salt River, Arizona, USA

/ Data from historical aerial photographs analyzed with a GIS show that river channel change on the Salt River in the Phoenix metropolitan area of central Arizona has been driven by large-scale regional flood events and local human activities. Mapping of functional surfaces such as low-flow channels, high-flow channels, islands, bars attached to channel banks, and engineered surfaces shows that during the period from 1935 to 1997, the relative areal coverage of these surfaces has changed. Flood events have caused general changes in sinuosity of the low-flow channel, but islands have remained remarkably consistent in location and size, while channel-side bars have waxed and waned. The most important determinant of local channel form and process is sand and gravel mining, which in some reaches occupies more than 70% of the active channel area. The general location of mining is closely related to the location of the moving urban fringe, which serves as a market for sand and gravel during construction. Quantitative spatial analysis of imagery supplemented by field mapping shows that for each location within the general channel area, it is possible to specify a probability of encountering a low-flow channel or other fluvial features. Maps showing the distribution of these probabilities of occurrence reveal the most probable location and configuration of the channel as it occurred in the past. Some reaches have the low-flow channel located persistently within a limited area as a result of bedrock or sinuosity controls, but other reaches dominated by flow separation or shallow gradient have almost no persistence in channel location from one flood to another.     

Integrated Resource Management: Moving from Rhetoric to Practice in Australian Agriculture

/ Implementing the concept of sustainability through integrated approaches to natural resource management poses enormous challenges for both the rural communities and government agencies concerned. This paper reviews the underlying rhetoric of sustainable agricultural systems and the integrated resource management paradigm and identifies some of the challenges being experienced in translating this rhetoric into practice. A relatively recently implemented community-based integrated catchment management (ICM) process in a rural community in northeast Australia is examined in terms of some of the lessons learned that may be relevant to other similar integrated resource management (IRM) processes. It reveals a pragmatic, opportunistic, and evolving implementation process based on adaptive learning rather than a more traditional "rational" planning approach. Some essential characteristics of a community-based IRM process are identified, including fostering communication; providing a structure that fosters cooperation and facilities coordination among community, industry, and government agencies; the integration of IRM principles into local government planning schemes; and an emergent strategic approach to IRM program implementation. We conclude by identifying some essential characteristics of an IRM process that can assist a community to adapt to, and manage change for, sustainable resource use.     

What is the potential measurement error in occupational exposure studies?

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

Matching response to context in complex political emergencies: 'relief', 'development', 'peace-building' or something in-between?

There is an ongoing debate over the value and pitfalls of the policy and practice of 'linking relief and development' or 'developmental relief' in aid responses to complex political emergencies (CPEs). Driven by concerns about relief creating dependence, sometimes doing harm and failing to address root causes of emergencies despite its high cost, pursuit of both relief and development has become a dominant paradigm among international aid agencies in CPEs as in 'natural' disasters. In CPEs a third objective of 'peace-building' has emerged, along with the logic that development can itself help prevent or resolve conflict and sustain peace. However, this broadening of relief objectives in ongoing CPEs has recently been criticised on a number of counts, central concerns being that it leads to a dilution of commitment to core humanitarian principles and is overly optimistic. This paper addresses these issues in the light of two of the CPEs studied by the COPE project: Eritrea and Somalia/Somaliland. It is argued that the debate has so far suffered from lack of clarity about what we mean by 'relief', 'development' and, for that matter, 'rehabilitation' and 'peace-building'. The wide spectrum of possible aid outcomes does not divide neatly into these categories. The relief-development divide is not always as clear-cut, technically or politically, as the critics claim. Moreover such distinctions, constructed from the point of view of aid programmers, are often of little relevance to the concerns of intended beneficiaries. Second, there has been insufficient attention to context: rather than attempting to generalise within and across CPE cases, a more productive approach would be to examine more closely the conditions under which forms of aid other than basic life support can fruitfully be pursued. This leads to consideration of collective agency capacity to respond effectively to diverse needs in different and changing circumstances.     

Bioconcentration of n-dodecane and its highly branched isomer 2,2,4,6,6-pentamethylheptane in fathead minnows

Petroleum products are complex mixtures of hydrocarbons. They are important as constituents of fuels and lubricants, and as key raw materials for the chemicals industry. Since there is a potential for accidental releases to the aquatic environment, bioaccumulation of higher hydrocarbons is of concern. Here, the bioconcentration behaviour of two representative hydrocarbons, the dodecane isomers n-dodecane and 2,2,4,6,6-pentamethylheptane (PMH), was investigated in fathead minnows at concentrations in water below their maximum aqueous solubility. The concentration of n-dodecane in fish did not exceed our method limit of detection of 60 μg/kg. In contrast, PMH could be quantified in fish. No significant increase in the ratio of PMH concentrations in fish to water could be detected indicating that an exposure time of 4–10 days is sufficient to approach steady-state. For n-dodecane the upper limit of the bioconcentration factor (BCF) is estimated by dividing the method limit of detection by the exposure concentration and a value of 240 l/kg is derived. For PMH the bioconcentration factor, estimated as the average fish/water concentration ratio during the steady-state part of the experiment, ranges between 880 and 3500 l/kg. The BCFs of both compounds are small compared to their hydrophobicity. Given that both linear and branched hydrocarbons are known to be biotransformed by fish, it appears that efficient metabolism of the test compounds in fathead minnows prevents bioaccumulation.     

A set of constitutive relationships accounting for residual NAPL in the unsaturated zone

Although laboratory experiments show that non-aqueous phase liquid (NAPL) is retained in the unsaturated zone, no existing multiphase flow model has been developed to account for residual NAPL after NAPL drainage in the unsaturated zone. We developed a static constitutive set of saturation-capillary pressure relationships for water, NAPL and air that accounts for both this residual NAPL and entrapped NAPL. The set of constitutive relationships is formulated similarly to the set of scaled relationships that is frequently applied in continuum models. The new set consists of three fluid-phase systems: a three-phase system and a two-phase system, that both comply with the original constitutive model, and a newly introduced residual NAPL system. The new system can be added relatively easily to the original two- and three-phase systems. Entrapment is included in the model. The constitutive relationships of the non-drainable residual NAPL system are based on qualitative fluid behavior derived from a pore scale model. The pore scale model reveals that the amount of residual NAPL depends on the spreading coefficient and the water saturation. Furthermore, residual NAPL is history-dependent. At the continuum scale, a critical NAPL pressure head defines the transition from free, mobile NAPL to residual NAPL. Although the Pc-S relationships for water and total liquid are not independent in case of residual NAPL, two two-phase Pc-S relations can represent a three-phase residual system of Pc-S relations. A newly introduced parameter, referred to as the residual oil pressure head, reflects the mutual dependency of water and oil. Example calculations show consistent behavior of the constitutive model. Entrapment and retention in the unsaturated zone cooperate to retain NAPL. Moreover, the results of our constitutive model are in agreement with experimental observations.     

Fate of atrazine and chlorpyrifos during solid state fermentation--examination of processes

Solid state fermentation (SSF) was investigated as a means to dispose of two commonly used pesticides, chlorpyrifos (O,O-diethyl O-(3,5,6-trichloro-2-pyridyl) phosphorothioate) and atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine). SSF experiments were carried out in bench-scale bioreactors (equipped with CO2 and volatile organic traps) containing a mixture of lignocellulosic materials and a radiolabeled pesticide. Ethyl acetate-extractable, alkali soluble, and alkali insoluble fractions were evaluated for radioactivity following a 60-d incubation period at 40 degrees C. The majority of the [2,6-pyridyl-14C]chlorpyrifos was associated with the ethyl acetate extract (about 74%), 17% was trapped as organic volatiles by polyurethane foam traps and < 0.5% of the chlorpyrifos was mineralized to CO2. Only small amounts of the radioactivity were associated with alkali soluble (0.0003%) and alkali insoluble (0.3%) fractions. In the [14C-U-ring]atrazine bioreactors, very little of the radioactivity volatilized (<0.5%) and less than 0.5% was mineralized to CO2. Approximately 57% of the applied radioactivity was associated with the ethyl acetate extract while 9% and 24% of the radioactivity was associated with the alkali soluble (humic and fulvic acids) and alkali insoluble fractions, respectively. Possible reaction mechanisms by which covalent bonds could be formed between atrazine (or metabolites) and humic substances were investigated. The issue of bound atrazine residue (alkali soluble fraction) was at least partially resolved. Oxidative coupling experiments revealed that formation of covalent bond linkages between amino substituent groups of atrazine residue and humic substances is highly unlikely.     

Ecotoxicity revealed in parasite communities of Sigmodon hispidus in terrestrial environments contaminated with petrochemicals

Several studies have documented contaminant-induced alterations in host-parasite relationships of vertebrate hosts in aquatic environments, suggesting this functional relationship may be useful for monitoring community-level effects of stressors in terrestrial systems. We hypothesized that gastrointestinal helminth communities of hispid cotton rat (Sigmodon hispidus) hosts would be sensitive to exposure to complex mixtures of petrochemicals in soils of tallgrass prairie habitats contaminated with oil refinery wastes. Parasite communities were surveyed (1993-95) on three contaminated and two reference sites on an oil refinery complex in Oklahoma. Abundance of Schizotaenia sigmodontis infections was two-fold higher in hosts from reference than contaminated sites. Strongyloides sigmodontis exhibited pronounced seasonal differences in prevalence and abundance in host populations from reference sites, with much higher seasonal variation compared to hosts from contaminated sites. Other helminth species, including Schizotaenia sigmodontis, Protospirura muris, Longistriata adunca, also exhibited seasonal fluctuations in abundance. Differences in species richness and composition were also observed, with hosts from the reference sites consistently supporting a higher mean number of species compared to those from contaminated sites. Differences in community structure indicate that host-parasite relationships can provide another useful method for monitoring community-level impacts of contamination in a terrestrial system.