A Geospatial Methodology to Identify Locations of Concentrated Runoff from Agricultural Fields

A geospatial methodology has been developed that utilizes high resolution lidar‐derived DEMs to help track runoff from agricultural fields and identify areas of potential concentrated flow through vegetated riparian areas in the Coastal Plain of Virginia. Points of concentrated flow are identified across 74 agricultural fields within the Virginia portion of the Chesapeake Bay watershed. On average, 70% of the surface area of the agricultural fields analyzed drains through less than 20 m of the field margin, and on average 81% of the field surface area drains through 1% or less of the field margin. Within the riparian buffer, locations that were predicted by the geospatial model to have high levels of concentrated flow were found to exhibit evidence of channelization. Results indicate that flow concentration and channelized flow through vegetated riparian areas may be common along the margin of agricultural fields, resulting in vegetated riparian areas that are less effective at sediment trapping than assumed. Additional results suggest that the regulations governing the location and width of vegetated riparian may not be sufficient to achieve goals for reducing sediment and nutrient runoff from nonpoint agricultural sources. Combined with the increasing availability of lidar‐derived DEMs, the geospatial model presented has the potential to advance management practices aimed at reducing nonpoint source pollution leaving agricultural fields.     

The mobility of thiobencarb and fipronil in two flooded rice-growing soils

The mobility of the rice pesticides thiobencarb (S-[(4-chlorophenyl) methyl] diethylcarbamothioate) and fipronil ([5-amino-3-cyano-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-4-[(trifluoromethyl)sulfinyl]pyrazole) were investigated in the glasshouse under flooded conditions using two Australian rice-growing soils. When using leakage rates of 10 mm day^?1, less than 20% of applied thiobencarb and fipronil remained in the water column after 10 days due to rapid transfer to the soil phase. Up to 70% and 65% of the applied thiobencarb and fipronil, respectively, were recovered from the 0–1 cm layer of soils. Only 5–7% of each pesticide was recovered from the 1–2 cm layer, and less than 2% was recovered from each 1 cm layer in the 2–10 cm region of the soils. Analysis of the water leaking from the base of the soil cores showed between 5–10% of the applied thiobencarb and between 10–20% of the applied fipronil leaching from the soil cores. The high levels of pesticide in the effluent was attributed to preferential flow of pesticide-laden water via soil macropores resulting from the wetting and drying process, worm holes and root channels.     

Incorporating bioavailability into management limits for copper in sediments contaminated by antifouling paint used in aquaculture

Although now well embedded within many risk-based sediment quality guideline (SQG) frameworks, contaminant bioavailability is still often overlooked in assessment and management of contaminated sediments. To optimise management limits for metal contaminated sediments, we assess the appropriateness of a range methods for modifying SQGs based on bioavailability considerations. The impairment of reproduction of the amphipod, Melita plumulosa, and harpacticoid copepod, Nitocra spinipes, was assessed for sediments contaminated with copper from antifouling paint, located below aquaculture cages. The measurement of dilute acid-extractable copper (AE-Cu) was found to provide the most useful means for monitoring the risks posed by sediment copper and setting management limits. Acid-volatile sulfide was found to be ineffective as a SQG-modifying factor as these organisms live mostly at the more oxidised sediment water interface. SQGs normalised to %-silt/organic carbon were effective, but the benefits gained were too small to justify this approach. The effectiveness of SQGs based on AE-Cu was attributed to a small portion of the total copper being present in potentially bioavailable forms (typically <10% of the total). Much of the non-bioavailable form of copper was likely present as paint flakes in the form of copper (I) oxide, the active ingredient of the antifoulant formulation. While the concentrations of paint-associated copper are very high in some sediments, as the transformation of this form of copper to AE-Cu appears slow, monitoring and management limits should assess the more bioavailable AE-Cu forms, and further efforts be made to limit the release of paint particles into the environment.     

Fetal therapies for cytomegalovirus: What we tell prospective parents

Congenital CMV is the most common congenital infection in the developed world. Infection results in congenital disease ranging from asymptomatic infection to severe neurodevelopmental impairment, and occasionally fetal or neonatal death. Fetal infection can occur through maternal-fetal transmission during primary maternal infection or maternal reactivation or re-infection. Awareness among maternal health care providers and parents is low. The prevention of maternal CMV infection currently relies on hygiene measures, with no effective CMV vaccine or prophylactic therapies. No licensed treatment options are available to prevent maternal-fetal transmission or fetal disease. Hyperimmunoglobulin and valaciclovir have been investigated for prevention of maternal-fetal transmission or fetal treatment, with some evidence supporting consideration of maternal administration of hyperimmunoglobulin or valaciclovir therapy in certain circumstances. This article outlines the clinical evidence regarding proven preventative behavioral measures and experimental hyperimmunoglobulin and valaciclovir therapies, that is structured around common questions asked by pregnant women about CMV infection. It is aimed to help maternity health care providers counsel prospective parents about congenital CMV disease and the preventative and therapeutic strategies currently available.     

Characterisation of volatile organic compounds and polycyclic aromatic hydrocarbons in the ambient air of steelworks

Investigations have been undertaken at two integrated steelworks in the UK to characterise airborne organic micro-pollutants and to assess the contribution of iron ore sintering and coke making operations on the air quality. Concentrations of volatile organic compounds (VOCs), namely benzene, toluene and p-xylene, were measured continuously within the boundary of a coking plant using for the first time differential optical absorption spectrometry (DOAS) between 2004 and 2006. Concentrations were obtained along two monitoring paths surrounding the coke plant and the average benzene concentration measured along both paths over the campaign was 28 μg m^?3. Highest benzene concentrations were associated with winds downwind of the coke oven batteries. Concentrations of polycyclic aromatic hydrocarbons (PAHs) in ambient air were measured during 27 consecutive days in 2005 at three different locations on an integrated steelworks. PAH profiles were determined for each sampling point and compared to coke oven and sinter plant emission profiles showing an impact from the steelworks. The mean benzo [a] pyrene concentration determined in the immediate vicinity of the coke ovens downwind from the battery was 19 ng m^?3, whereas for the two other sites average benzo [a] pyrene concentrations were much lower (around 1 ng m^?3). Data were analysed using principal components analysis (PCA) and results showed that coke making and iron ore sintering were responsible for most of the variation in the PAH concentrations in the vicinity of the investigated plant.     

Denning behaviour of the European badger (Meles meles) correlates with bovine tuberculosis infection status

Heterogeneities in behaviours of individuals may underpin important processes in evolutionary biology and ecology, including the spread of disease. Modelling approaches can sometimes fail to predict disease spread, which may partly be due to the number of unknown sources of variation in host behaviour. The European badger is a wildlife reservoir for bovine tuberculosis (bTB) in Britain and Ireland, and individual behaviour has been demonstrated to be an important factor in the spread of bTB among badgers and to cattle. Radio-telemetry devices were deployed on 40 badgers from eight groups to investigate patterns of den (sett) use in a high-density population, where each group had one or two main and three to eight outlier setts in their territory. Badgers were located at their setts for 28 days per season for 1 year to investigate how patterns differed between individuals. Denning behaviour may have a strong influence on contact patterns and the transmission of disease. We found significant heterogeneity, influenced by season, sex and age. Also, when controlling for these, bTB infection status interacting with season was highly correlated with sett use. Test-positive badgers spent more time away from their main sett than those that tested negative. We speculate that wider-ranging behaviour of test-positive animals may result in them contacting sources of infection more frequently and/or that their behaviour may be influenced by their disease status. Measures to control infectious diseases might be improved by targeting functional groups, specific areas or times of year that may contribute disproportionately to disease spread.