Cluster analysis of inorganic elements in particulate matter in the air environment of an equatorial urban coastal location

Concentrations of nine inorganic elements (Na, Zn, Ca, Fe, Ni, Mn, Cu, Cd and Al) in particulate matter (PM₁₀) in the air of an equatorial urban coastal location during 2009 were studied during summer and winter monsoon seasons using high-volume sampling techniques. Atomic absorption spectrophotometry was used to analyse the samples. The concentrations of most inorganic elements were higher during summer than winter, except for Cu and Zn. The main inorganic elements in PM₁₀ are Na, Zn and Ca. High concentrations of Na and Ca are due to marine aerosols. Analysis of enrichment factors showed that inorganic elements are from non-crustal sources. Cluster analysis identified five clusters in the summer and six in the winter: (1) PM₁₀–Ni, (2) Zn–Na, (3) Fe–Cu–Ca–Cd, (4) Mn and (5) Al for summer; and (1) PM₁₀, (2) Zn, (3) Fe–Ni, (4) Cu–Ca–Na–Cd, (5) Mn and (6) Al for winter. Combining both correlation and cluster analysis, it was found that Fe–Cu–Cd was from industry/vehicle emissions, Zn was from resuspended soil, Mn was from metallurgical processes, Ni was from a nearby power plant and Al was from crustal sources. Inorganic element concentrations could be a good indicator of local sources of PM₁₀.     

Active Biodegradable Cassava Starch Films Containing Sophorolipids Produced by Starmerella bombicola ATCC® 22214™

Journal of Polymers and the Environment - Sophorolipids are glycolipid biosurfactants produced by the yeast Starmerella bombicola. They have great potential for application in the food industry due...     

Results from a reference laboratory for prenatal diagnosis of sickle cell disorders in Cuba

A nationwide programme for the prevention of sickle cell (SS and SC) disorders was initiated in Cuba in 1983. Couples at risk were identified by screening pregnant women and the partners of those who carry an abnormal haemoglobin, followed by genetic counselling and the offer of prenatal diagnosis. Prenatal diagnosis was performed in one laboratory, which had carried out 1068 prenatal tests for Hb SS and SC disorders by the end of 1992. The centralization of the service has permitted rapid identification and resolution of problems.     

Biogeography of Atlantic and Mediterranean ascidians

Ascidian fauna have been intensively studied in the Atlantic Ocean, adjacent subpolar regions and Mediterranean Sea for the last 20 years. Here, we have described current species distribution patterns and identified nested areas of endemism using parsimony analysis of endemicity (PAE). We also identified diversity hotspots, areas in which species occurred exclusively, and gaps in information about distribution patterns. Finally, we compared ascidian distributions among various proposed biogeographic divisions. The comprehensive literature review provided data on the geographic distribution of 627 species of ascidians. In the West Atlantic, there were three peaks in richness: north Caribbean—96 species, São Paulo and Rio de Janeiro—61 species and the subantarctic region—54 species. In the eastern Atlantic, the greatest richness occurred on Spanish and French coasts—91 species and in Senegal—83 species. In the Mediterranean, the greatest richness was in Spain and France—142 species and Italy—127 species. PAE designated 20 areas of endemism nested within eight larger regions that were more or less in agreement with realms or provinces of previous studies: North Atlantic, Caribbean, southeastern Brazil, Magellanic, Subantarctic, Tropical West Africa, South Africa, and Mediterranean. Distribution patterns of the Ascidiacea, in general, followed previously proposed divisions of regions and provinces in the Atlantic and adjacent polar regions, but not subdivisions of these regions.     

Synthesis and Characterisation of Polyester Based on Isosorbide and Butanedioic Acid

Copolyesters based on isosorbide and butanedioic acid in combination with monomers such as adipic acid and dimethyl terephthalate, poly(isosorbide-co-butanedioic acid) (and -co-adipic acid) and poly(isosorbide-co-butanedioic acid-co-dimethyl terephthalate), were synthesized and characterized. Linear OH-functionalized polyesters were obtained via melt polyesterification of dicarboxylic acids with OH-functional monomers. The type of end-group was controlled by the monomer stoichiometry and hydroxyl functional group is formed in time. Average molecular masses of synthesised polyesters were measured by gel permeation chromatography. The glass transition temperatures and thermal stability of the obtained polyesters were effectively adjusted by varying polymer composition and molar mass. Addition of adipic acid or dimethyl terephthalate increased glass transition temperatures of obtained polyesters. Thermal stability of obtained polyester slightly increases by the increasing of dimethyl terephthalate content. Molecular structures of obtained polyester were assessed by Fourier transform infrared spectra and ¹H NMR spectroscopy.     

A method for reducing environmental pollution by using essential oils in rodent pest management program

Environmental Science and Pollution Research - Strong-smelling plant extracts, such as essential oils, have a variety of feeding effects on mammals. Considering current concerns over long-term...     

Optimal conditions of Al and Fe extraction from laterite soil using D-optimal design

This paper reports pioneering work in identifying an alternative coagulation agent of wastewater treatment, given the availability of commonly used agents are of a higher cost relative to more natural sources, such as soil. The alternative proposed is laterite soil from northern Malaysia because it contains high amounts of Al and Fe, which are well-known coagulants. The soil was grinded and sieved to obtain uniform particle sizes of <250???m. Al and Fe were extracted from the soil. Extraction agents: (1) HCl, (2) NaOH, and (3) HCl?+?NaCl were chosen. It was found that the most effective agent to extract Fe was 5?N HCl while to extract Al was HCl?+?NaCl, 2 and 4?N, respectively. D-optimal design observed that extraction time t, temperature T, and ratio of amount of laterite soil to amount of extractants r, showed a significant effect on Al extraction. In contrast, the combination of factors t and r exhibited insignificant effect on Fe extraction while other factors were significant. The optimum conditions for extraction of both Al and Fe were 90?°C, 40?min, for r?=?1:15, which gave [Fe]?=?1,870?mg/l and [Al]?=?0.17?mg/l and 90?°C, 90?min, for r?=?1:10, which gave [Fe]?=?2,900?mg/l and [Al]?=?0.130?mg/l. Since concentration of Fe extracted from laterite soil was high, it was concluded that laterite soil can be considered as an alternative and novel source of coagulant applicable in a wastewater treatment coagulation process.     

Structural Differences Between Lignin Model Polymers Synthesized from Various Monomers

In a plant cell wall, lignin is synthesized from several monomeric precursors, combined in various ratios. The variation in monomer type and quantity enables multifunctional role of lignin in plants. Thus, it is important to know how different combinations of lignin monomers impact variability of bond types and local structural changes in the polymer. Lignin model polymers are a good model system for studies of relation between variations of the starting monomers and structural variations within the polymer. We synthesized lignin model polymers from three monomers, CF??based on coniferyl alcohol and ferulic acid in monomer proportions 5:1 and 10:1 (w/w), CP??based on coniferyl alcohol and p-coumaric acid in proportion 10:1 (w/w) and CA??based on pure coniferyl alcohol. We studied structural modifications in the obtained polymers, by combining fluorescence microscopy and spectroscopy, FT-IR and Raman spectroscopy, in parallel with determination of polymers?? molecular mass distribution. The differences in the low M _w region of the distribution curves of the 10:1 polymers in comparison with the CA polymer may be connected with the increased content of C=C bonds and decreased content of condensed structures, as observed in FT-IR spectra and indicated by the analysis of fluorescence spectra. The 5:1 CF polymer contains a different type of structure in comparison with the 10:1 CF polymers, reflected in its simpler M _w distribution, higher homogeneity of the fluorescence emitting structures and in the appearance of a new high-wavelength emission component. We propose that this component may originate from ??-conjugated chains, which are longer in this polymer. The results are a contribution to the understanding of the involvement of structural variations of lignin polymers in the cell wall structural plasticity.     

Anaerobic whey treatment by a stirred sequencing batch reactor (ASBR): effects of organic loading and supplemented alkalinity

An assessment was made of cheese whey treatment in a mechanically stirred anaerobic sequencing batch reactor (ASBR) containing granular biomass. The effect of increasing organic load and decreasing influent alkalinity supplementation (as sodium bicarbonate) was analyzed. The reactor operated on 8-h cycles with influent COD concentrations of 500, 1000, 2000 and 4000 mg/L, corresponding to volumetric organic loads of 0.6 to 4.8 mgCOD/L.d. Organic COD removal efficiencies were always above 90% for filtered samples. These results were obtained with an optimized alkalinity supplementation of 50% (ratio between mass of NaHCO3 added and mass of influent mgNaHCO3/mgCOD) in the assays with 500 and 1000 mgCOD/L and of 25% in the assays with 2000 and 4000 mgCOD/L. Initial alkalinity supplementation was equal to the mass of influent COD (100%). The system showed formation of viscous polymer-like substances. These were probably of microbiological origin occurring mainly at influent CODs of 2000 and 4000 mg/L and caused some biomass flotation. This could, however be controlled to enable efficient and stable reactor operation.