Proposal of Indicators to Assess Urban Sustainability in Brazil

The research related here focuses on municipal situations where problems of sustainability may be defined and tackled on the basis of bottom-up management procedures with the participation of organized society. The aim is to build management models that may be implemented with reasonable administrative effort and cost. Implementation pursues the target of approaching a sustainable situation in the municipality. Environmental parameters for an ideal municipality with undefined geographical location are presented. For each parameter, a set of indicators is developed that can measure the prospect of sustainability. The indicators are defined in terms of numbers or literal concepts according to the possibility of measurement. Examples of management models are presented, which are able to approach the situation defined as sustainable by the indicators. The basic management tool is the learning curve of targeted communities, which is experimentally developed and applied. The indicators are grouped according to their range of applicability.     

Towards a smallholder hydrology for equitable and sustainable water management

Situations of water scarcity challenge sustainability and threaten small users' access to water. In response to this problem, there has been a search for a method of hydrological analysis that can better represent the needs of small water users. While this search is rooted in the debate favouring a more participatory and inclusive allocation of the resource, it also requires a new focus on smallholder hydrology that can confront the gaps and biases found in current hydrological practices in many countries. This article looks at past hydrological practices and also at results of recent studies, highlighting the perspective of smallholder irrigators in surface water planning in Zimbabwe, and groundwater planning in India. These case studies show that wider social forces, not always best science, drive hydrological practices. However, new frameworks focusing on the water user can emerge for more equitable and sustainable water management.     

Improving photostability and efficiency of polymeric luminescent solar concentrators by PMMA/MgO nanohybrid coatings

MgO nanocrystals were synthesized and doped with different concentrations in poly(methylmethacrylate) (PMMA) to prepare hybrid organic-inorganic coatings based on polymer nanohybrid thin films. The nanoparticles were found to be spherical with 62 nm diameter as determined by X-ray diffraction (XRD) and atomic force microscope (AFM). The coatings were characterized by spectroscopic tools such as optical absorption, transmission and fluorescence spectroscopy. The prepared nanohybrid films were spin-coated on cost-effective luminescent PMMA substrates doped with highly efficient luminescent dyes luminescent solar concentrators (LSCs). The outdoor photostability tests demonstrated enhanced protection against UVA radiation for coated LSCs compared to bare LSC substrates. The current–voltage characteristics of commercially produced LSC prototypes showed that the poor UV response of monocrystalline silicon solar cell can be improved by for LSCs coated by PMMA/MgO nanohybrid films which act as luminescent down shifting layer (LDSL).     

Carbon disulfide at a Chinese viscose factory external and internal exposure assessment

This article presents the results of carbon disulfide exposure measurements in a Chinese viscose rayon factory. The objectives of the study were to identify the external exposure levels at a large factory and to investigate the 2-thiothiazolidine-4-carboxylic acid (TTCA) concentrations in the urine of the subjects who were exposed to carbon disulfide in the working place atmosphere. The metabolism of carbon disulfide in the exposed subjects was also studied in order to demonstrate the best points in time for the internal exposure sampling. The measurement of the amount of personal exposure to carbon disulfide in the air of the workplace was performed by GC-FPD; the presence of TTCA in the workers urine was analyzed by use of a modified HPLC method. The kinetics of TTCA excretion was studied by analyses at different time-points both during and after exposure to carbon disulfide in the subjects. A total of 155 personal samples were obtained. The carbon disulfide concentration in the staple viscose hall was 13.72 +/- 1.12 mg m-3 in terms of the geometric mean +/- geometric standard deviation, and was 20.05 +/- 1.33 mg m-3 in the filament spinning hall. The TTCA values in the subjects who worked in the staple spinning hall were 1.18 +/- 0.43 mg g-1 creatinine and 1.07 +/- 0.38 mg g-1 creatinine for subjects working in the filament spinning hall. The best time for TTCA sampling is at the end of the working shift, the TTCA excretion was stable for a period of 4-12 h after exposure of the subjects to the carbon disulfide. It might be that the Chinese have different anthropometric characteristics; a sampling bias may therefore appear among different races.     

Face mask and medical waste generation in the City of Baguio,Philippines: its current management and GHG footprint

Journal of Material Cycles and Waste Management - The daily use of facemask to prevent virus transmission increases the negative effect on the environment because of improper waste disposal. Due to...     

Passive air sampling theory for semivolatile organic compounds

The mathematical modelling underlying passive air sampling theory can be based on mass transfer coefficients or rate constants. Generally, these models have not been inter-related. Starting with basic models, the exchange of chemicals between the gaseous phase and the sampler is developed using mass transfer coefficients and rate constants. Importantly, the inter-relationships between the approaches are demonstrated by relating uptake rate constants and loss rate constants to mass transfer coefficients when either sampler-side or air-side resistance is dominating chemical exchange. The influence of sampler area and sampler volume on chemical exchange is discussed in general terms and as they relate to frequently used parameters such as sampling rates and time to equilibrium. Where air-side or sampler-side resistance dominates, an increase in the surface area of the sampler will increase sampling rates. Sampling rates are not related to the sampler/air partition coefficient (K(SV)) when air-side resistance dominates and increase with K(SV) when sampler-side resistance dominates.     

Assessment of atmospheric metallic pollution in the metropolitan region of São Paulo, Brazil, employing Tillandsia usneoides L. as biomonitor

Tillandsia usneoides L. is an epiphytic bromeliad plant able to absorb water and nutrients directly from the air. For this reason this species was selected to carry out a monitoring study of air pollution in the metropolitan region of S?o Paulo, Brazil. Five consecutive transplantation experiments (8 weeks each) were performed in 10 sites of the city, submitted to different sources of air pollution (industrial, vehicular), using plants collected from an unpolluted area. After exposure, trace metals were analyzed in the plant by instrumental neutron activation analysis. Traffic-related elements such as Zn and Ba presented high concentrations in exposure sites near to heavy traffic avenues (cars, buses and trucks) and may be associated to vehicular sources. For Zn and Co the highest contents were related to industrial zones and can be associated to the presence of anthropogenic emission sources. The rare earth elements, Fe and Rb, probably have soil particles as main source.     

Variation in the Parameters of the Life Cycle in Prawns of the Genus MacrobrachiumBate (Crustacea, Palaemonidae)

Variations in the parameters of the life cycle in freshwater prawns of the genus MacrobrachiumBate and some populations of the species Macrobrachium nipponense(De Haan) were analyzed comparatively. Using factor analysis, these parameters were systematized and expressed through two factors. The first factor is related to the parameters of larval development and the dimensions of an egg, and the second, to the length of adults and their fecundity. The greatest differences in the values of intrageneric and intraspecific variation of parameters are noted for the dimensions of larval stages. It is assumed that the formation of a species proceeds primarily through the appearance of adaptations at larval stages.