Behavior and prediction of photochemical degradation of chlorinated polycyclic aromatic hydrocarbons in cyclohexane

The photochemical degradation of 11 chlorinated polycyclic aromatic hydrocarbons (ClPAHs) and the corresponding 5 parent PAHs was examined to simulate the compound’s fate on aerosol surfaces. All the ClPAHs and PAHs decayed according to the first-order reaction rate kinetics. The photolysis rates of ClPAHs varied greatly according to the skeleton of PAHs; the rates of chlorophenanthrenes (ClPhes) and 1-chloropyrene were higher than those of corresponding parent PAHs, whereas chlorofluoranthenes, 7-chlorobenz[a]anthracene and 6-chlorobenzo[a]pyrene were more stable under irradiation compared to respective parent PAH. Considering the photoproducts of ClPhes detected, the oxidation could occur immediately at positions of the highest frontier electron density. Finally, the quantitative structure-property relationship models were developed for direct photolysis half-lives and average quantum yields of the ClPAHs and parent PAHs, in which the significant factors affecting photolysis were E_LUMO+1, total energy and surface area, and E_LUMO, E_LUMO − E_HOMO and total energy, respectively.     

Effect of Tinospora cordifolia on the reduction of ultraviolet radiation‐induced cytotoxicity and DNA damage in PC12 cells

The safety of Tinospora cordifolia and its potential to protect against ultraviolet radiation‐induced cytotoxicity and DNA damage in PC12 cells were investigated. To evaluate the safety of T. cordifolia, cell viability and agarose gel electrophoresis were carried out using PC12 cells treated with 0 to 100 μg mL^?1 of methanol extract of T. cordifolia. T. cordifolia extracts did not show cytotoxicity ranging 0 to 100 μg mL^?1. In addition, T. cordifolia extracts significantly increased cell viability at 1 ng, 10 ng and 1 μg mL^?1 concentrations in serum‐deprived medium compared to control. To confirm the protective role against UV‐induced damage, PC12 cells alone or in the presence of 10 ng, 100 ng, or 1 μg mL^?1 of T. cordifolia extract were exposed to 250, 270 and 290 nm of UV radiation, which corresponded to doses of 120, 150 and 300 mJ cm^?2, respectively. Treatment with T. cordifolia extracts significantly increased the cell survival rate irradiated at 290 nm. In addition, T. cordifolia extracts significantly reduced cyclobutane pyrimidine dimer formation induced by UV irradiation at all wavelengths. In conclusion, T. cordifolia is not toxic and safe for cells. Our findings can support its application as phototherapy in the medical sector.     

Effect of lower chlorinated hydroxylated-polychlorobiphenyls on development of PC12 cells

Hydroxylated polychlorobiphenyls (OH-PCBs) are major metabolites of PCBs that are widely distributed in the environment. While the effects of penta- to hepta-chlorinated OH-PCBs on neuronal differentiation have been widely reported, those of lower chlorinated OH-PCBs have not been extensively studied. To investigate the effects of lower chlorinated OH-PCBs on neuronal development, we studied the effects of mono- to hexa-chlorinated OH-PCBs on PC12 cells. Morphological changes were examined using an automatic system IN Cell Analyzer. Seventeen of the 20 OH-PCBs investigated promoted neuronal elongation in an OH-PCB concentration-dependent manner, while three OH-PCB congeners suppressed neuronal elongation based on Dunnett’s analysis. In particular, the top five OH-PCBs (4OH-PCB2, 4′OH-PCB3, 4′OH-PCB25, 4′OH-PCB68, and 4′OH-PCB159), which have hydroxyl groups at the para-position and chlorine substitutions at the 2, 4, or 3′ positions, significantly promoted neuronal elongation. Moreover, these neuronal elongations were suppressed by U0126, and phosphorylation of extracellular signal-regulated kinase (ERK) 1/2 was observed in PC12 cells treated with 4OH-PCB2, 4′OH-PCB25, and 4′OH-PCB159. Taken together, our results indicate that the effect of OH-PCB on neuronal development is not dependent on the number of chlorine groups but on the chemical structure, and the mitogen-activated kinase kinase (MEK)-ERK1/2 signaling pathway is involved in this process.     

A predictive mechanism for mercury oxidation on selective catalytic reduction catalysts under coal-derived flue gas

This paper introduces a predictive mechanism for elemental mercury (Hg(o)) oxidation on selective catalytic reduction (SCR) catalysts in coal-fired utility gas cleaning systems, given the ammonia (NH3)/nitric oxide (NO) ratio and concentrations of Hg(o) and HCl at the monolith inlet, the monolith pitch and channel shape, and the SCR temperature and space velocity. A simple premise connects the established mechanism for catalytic NO reduction to the Hg(o) oxidation behavior on SCRs: that hydrochloric acid (HCl) competes for surface sites with NH3 and that Hg(o) contacts these chlorinated sites either from the gas phase or as a weakly adsorbed species. This mechanism explicitly accounts for the inhibition of Hg(o) oxidation by NH3, so that the monolith sustains two chemically distinct regions. In the inlet region, strong NH3 adsorption minimizes the coverage of chlorinated surface sites, so NO reduction inhibits Hg(o) oxidation. But once NH3 has been consumed, the Hg(o) oxidation rate rapidly accelerates, even while the HCl concentration in the gas phase is uniform. Factors that shorten the length of the NO reduction region, such as smaller channel pitches and converting from square to circular channels, and factors that enhance surface chlorination, such as higher inlet HCl concentrations and lower NH3/NO ratios, promote Hg(o) oxidation. This mechanism accurately interprets the reported tendencies for greater extents of Hg(o) oxidation on honeycomb monoliths with smaller channel pitches and hotter temperatures and the tendency for lower extents of Hg(o) oxidation for hotter temperatures on plate monoliths. The mechanism also depicts the inhibition of Hg(o) oxidation by NH3 for NH3/NO ratios from zero to 0.9. Perhaps most important for practical applications, the mechanism reproduces the reported extents of Hg(o) oxidation on a single catalyst for four coals that generated HCl concentrations from 8 to 241 ppm, which covers the entire range encountered in the U.S. utility industry. Similar performance is also demonstrated for full-scale SCRs with diverse coal types and operating conditions.     

On the Estimation of Dispersal Kernels from Individual Mark-Recapture Data

We present a new method for estimating a distribution of dispersal displacements (a dispersal kernel) from mark-recapture data. One conventional method of calculating the dispersal kernel assumes that the distribution of displacements are Gaussian (e.g. resulting from a diffusion process) and that individuals remain within sampled areas. The first assumption prohibits an analysis of dispersal data that do not exhibit the Gaussian distribution (a common situation); the second assumption leads to underestimation of dispersal distance because individuals that disperse outside of sampling areas are never recaptured. Our method eliminates these two assumptions. In addition, the method can also accommodate mortality during a sampling period. This new method uses integrodifference equations to express the probability of spatial mark-recapture data; associated dispersal, survival, and recapture parameters are then estimated using a maximum likelihood method. We examined the accuracy of the estimators by applying the method to simulated data sets. Our method suggests designs for future mark-recapture experiments. Received: January 2004 / Revised: July 2005     

The impact of wet flue gas desulfurization scrubbing on mercury emissions from coal-fired power stations

This article introduces a predictive capability for Hg retention in any Ca-based wet flue gas desulfurization (FGD) scrubber, given mercury (Hg) speciation at the FGD inlet, the flue gas composition, and the sulphur dioxide (SO2) capture efficiency. A preliminary statistical analysis of data from 17 full-scale wet FGDs connects flue gas compositions, the extents of Hg oxidation at FGD inlets, and Hg retention efficiencies. These connections clearly signal that solution chemistry within the FGD determines Hg retention. A more thorough analysis based on thermochemical equilibrium yields highly accurate predictions for total Hg retention with no parameter adjustments. For the most reliable data, the predictions were within measurement uncertainties for both limestone and Mg/lime systems operating in both forced and natural oxidation mode. With the U.S. Environmental Protection Agency's (EPA) Information Collection Request (ICR) database, the quantitative performance was almost as good for the most modern FGDs, which probably conform to the very high SO2 absorption efficiencies assumed in the calculations. The large discrepancies for older FGDs are tentatively attributed to the unspecified SO2 capture efficiencies and operating temperatures and to the possible elimination of HCl in prescrubbers. The equilibrium calculations suggest that Hg retention is most sensitive to inlet HCl and O2 levels and the FGD temperature; weakly dependent on SO2 capture efficiency; and insensitive to HgCl2, NO, CA:S ratio, slurry dilution level in limestone FGDs, and MgSO3 levels in Mg/lime systems. Consequently, systems with prescrubbers to eliminate HCl probably retain less Hg than fully integrated FGDs. The analysis also predicts re-emission of Hg(O) but only for inlet O2 levels that are much lower than those in full-scale FGDs.     

Human intake of PCDDs, PCDFs, and dioxin like PCBs in Japan, 2001 and 2002

PCDDs, PCDFs, and dioxin like PCBs (dioxin) surveillance results derived from regular environmental monitoring as well as other dioxin surveys by national and local governmental bodies in Japan were collected and analyzed. Several thousand data for air and soil in fiscal year 2001 (from 01/04/2001 to 31/03/2002) and 2002, water (from the sea, rivers and lakes), sediment (from the sea, rivers and lakes), ground water, aquatic organisms, purified water from water purification plants, raw water from water purification plants, human breast milk, and human blood in fiscal 2001, and total diet study (TDS) and various kinds of foodstuff in fiscal 1998-2002 were collected. Average human uptake of dioxin in Japan in fiscal 2001 was estimated at 1.68 pg-TEQ/kg-bw/day, while uptake in fiscal 2002 was estimated at 1.52 pg-TEQ/kg-bw/day. Diet accounted for more than 90% of the total intake. Contributions of inhalation and soil ingestion were relatively small. Age-group-specific contribution of various foodstuff to total dietary intake was also estimated. The estimates of intake through fish and shellfish accounted for approximately 45-70% of total dietary intake in each age group. Monte Carlo simulation was conducted, using the data of the air and soil concentrations in fiscal 2001 and the total diet study data in fiscal 1998-2001, in order to obtain information on the variability of dioxin intake; The estimated average, median, 5th percentile and 95th percentile of the intake distribution were 1.78, 1.69, 0.95 and 2.91 pg-TEQ/kg-bw/day, respectively. This study found that the average total intake estimates in Japan in both fiscal 2001 and 2002 were estimated to be below tolerable daily intake level (TDI) defined by the Ministry of Health, Labour and Welfare, Japan (i.e. 4 pg-TEQ/kg-bw/day). The 95th percentile of the dioxin intake distributions estimated with Monte Carlo simulation using the data of the air and soil concentrations in fiscal 2001 and TDS data in fiscal 1998-2001 was also below the Japanese TDI.     

Ignitability characteristics of aluminium and magnesium dusts that are generated during the shredding of post-consumer wastes

The authors investigated the ignitability of aluminium and magnesium dusts that are generated during the shredding of post-consumer waste. The relations between particle size and the minimum explosive concentration, the minimum ignition energy, the ignition temperature of the dust clouds, etc. the relation between of oxygen concentration and dust explosion, the effect of inert substances on dust explosion, etc. were studied experimentally.

The minimum explosive concentration increased exponentially with particle size. The minimum explosive concentrations of the sample dusts were about 170 g/m³ (aluminium: 0–8 μm) and 90 g/m³ (magnesium: 0–20 μm). The minimum ignition energy tended to increase with particle size. It was about 6 mJ for the aluminium samples and 4 mJ for the magnesium samples. The ignition temperature of dust clouds was about 750 °C for aluminium and about 520 °C for magnesium. The lowest concentrations of oxygen to produce a dust explosion were about 10% for aluminium and about 8% for magnesium. A large mixing ratio (more than about 50%) of calcium oxide or calcium carbonate was necessary to decrease the explosibility of magnesium dust. The experimental data obtained in the present investigation will be useful for evaluating the explosibility of aluminium and magnesium dusts generated in metal recycling operations and thus for enhancing the safety of recycling plants.