Application of activated charcoal radon collectors in high humidity environments

Most commercially based activated charcoal radon collectors were designed for use in indoor environments. However, at present, they are often used for research in radon surveys in unique environments, such as in the bathrooms, underground areas, mines, caves and tunnels. In these environments, the relative humidity would be around 100%, and a change in the sensitivity of cpm(Bq m(-3))(-1)(radon) would occur. For this study, the reduction in the sensitivity of activated charcoal radon collector due to environmental humidity was investigated, and the data correction was discussed. Here, ST-100 (Pico-Rad) was selected as an example of a familiar activated charcoal radon collector. According to our performance test, the humidity of 90% (20 degrees C) resulted in a 15% reduction of the sensitivity for 24 h collection. The ST-100 user should discuss the necessity of data correction by comparing the change of sensitivity with other levels of estimation errors.     

Differences of two polychaete species reflected in enzyme activities

Polychaetes constitute most of the benthic macroinvertebrates in estuarine and coastal environments. We investigated the utilization of organic matter in two polychaete species, Capitella sp. I and Perinereis nuntia brevicirris, living in different coastal habitats. The protease activity of Capitella sp. I (89.7 μg mg⁻¹) was about 10 times that of P. nuntia brevicirris (8.0 μg mg⁻¹). High cellulase (endo-β-1,4-glucanase) activity was detected in P. nuntia brevicirris (3.2 μg mg⁻¹), whereas scarcely any was detected in Capitella sp. I. We isolated cDNA clones of protease mRNA from Capitella sp. I and of cellulase mRNA from P. nuntia brevicirris. The high protease activity of Capitella sp. I enabled it to survive in the sediment under a fish farm, where it degrades organic matter. In contrast, the high cellulase activity of the estuary-dwelling P. nuntia brevicirris allowed it to degrade organic matter originating from terrestrial areas.     

Hydrothermal treatment of MSWI bottom ash forming acid-resistant material

To recycle municipal solid waste incinerator (MSWI) bottom ash, synthesis of hydrothermal minerals from bottom ash was performed to stabilize heavy metals. MSWI bottom ash was mixed with SiO(2), Al(OH)(3), and Mg(OH)(2) so its chemical composition was similar to that of hydrothermal clay minerals. These solid specimens were mixed with water at a liquid/solid ratio of 5. The reaction temperature was 200 degrees C, and reactions were performed for 24-240h. Generation of kaolinite/smectite mixed-layer clay mineral was found in the samples after the reaction of the mixture of bottom ash, SiO(2), and Mg(OH)(2). Calcium silicate hydrate minerals such as tobermorite and xonotlite were also generated. X-ray powder diffraction suggested the presence of amorphous materials. Leaching tests at various pHs revealed that the concentration of heavy metals in the leachates from MSWI bottom ash hydrothermally treated with SiO(2) and Mg(OH)(2) was lower than that in leachates from non-treated bottom ash, especially under acid conditions. Hydrothermal treatment with modification of chemical composition may have potential for the recycling of MSWI bottom ash.     

Non-sterile simultaneous saccharification and fermentation of corn leaves and stalks to <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid without external nutrient addition

Fermentation of lignocellulosic biomass requires auxiliary materials, including nutrients, to ensure the proliferation of microorganisms. Nutrients are usually inexpensive, but their contribution to the cost is considerable because of the very low prices of fermentation products, such as bio-ethanol. Using substances present in native lignocellulosic biomass as nutrients for fermentation was proposed and demonstrated. Leaves and stalks of corn plants were used as biomass, and nutrients were recovered as a nutrient solution by soaking them in water before alkaline peroxide pretreatment. Pretreated biomass and the nutrient solution derived from the same lot were used for non-sterile simultaneous enzymatic saccharification and thermophilic l-lactic acid fermentation (SSF). Using the nutrient solution in the saccharification step did not impact sugar recovery, and instead improved sugar yields because of the presence of eluted sugars in the solution. The l-lactic acid yield of 0.33 g g^?1 based on native biomass weight indicated that the nutrient solution functioned as a source of nutrients and sugars, especially as a source of essential phosphorus. Comparatively, autoclaved SSF yielded less or no l-lactic acid, indicating an apparent inhibitive effect derived from the nutrient solution on bacterial growth.     

Studies on automated survey system of environmental chemicals by gas chromatography-mass spectrometry-computer I. Retrieval system of mass spectra

A retrieval system of mass spectra based upon the Probability Based Matching method was studied in order to apply it to survey the chemicals in environments by a gas chromatography-mass spectrometry-computer system. As retrieval indices, peak missing probability and relative confidence value were proposed.     

Material reuse and recycling in construction works in Japan

Journal of Material Cycles and Waste Management - The status of material reuse and recycling in Japan is reviewed with an emphasis on the efforts by the national government. First, the national...     

Development of a Model for Predicting the Volatilization Flux from Unsaturated Soil Contaminated by Volatile Chemical Substances

Environmental Modeling & Assessment - This work developed a model for predicting the volatilization flux from the unsaturated soil contaminated by volatile chemical substances (VCSs) such as...     

Characteristics of a bioxalate chelating extraction process for removal of chromium,copper and arsenic from treated wood

The disposal of wood waste treated with chromated copper arsenate (CCA) is a problem in many countries. We have proposed a novel chelating extraction technique for CCA-treated wood using bioxalate, a solution of oxalic acid containing sufficient sodium hydroxide to adjust the pH to 3.2, which is an effective way to obtain an extraction efficiency of 90% for chromium, copper, and arsenic. The purpose of the present study was to investigate the characteristics of bioxalate extraction of CCA-treated wood. Extractions of CCA-treated western hemlock chips with solutions of bioxalate, oxalic acid, and sodium hydroxide were carried out. The use of bioxalate was confirmed as the most effective extraction technique for chromium, copper and arsenic, with an efficiency of 90%. Extraction with simple oxalic acid was ineffective for copper (less than 40% extraction efficiency), but effective for chromium and arsenic, with 90% efficiency. Sodium hydroxide showed a similar tendency, being ineffective for chromium and copper (less than 20% extraction efficiency), but relatively effective for arsenic (around 70–80% efficiency). We also discovered an interesting phenomenon whereby the addition of sodium hydroxide to a simple oxalic acid solution during the oxalic acid extraction progress resulted in dramatically increased extraction efficiency for copper, chromium and arsenic, up to 90%. Although oxalic acid was ineffective for copper extraction, the addition of sodium hydroxide during the oxalic acid extraction process rendered it effective.