江阴市小城镇污水集中处理的研究与思考

随着城镇化进程加快,经济快速发展的同时环境污染问题随之出现,主要表现在小城镇污水处理率较低,各地区发展不平衡等方面。通过几年来的摸索与实践,江阴市小城镇污水集中处理已成一定规模,也凸现出一些问题和不足之处。通过对江阴市小城镇污水集中处理水质特点及工艺的研究,结合江阴市污水处理厂运行情况进行问题分析,提出相应的对策及思考。通过加强城镇污水管网建设,运用成熟经济高效的处理工艺,引进先进管理制度,促进环保部门的监管工作,达到改善小城镇污水处理效率的目的。     

The ability of Azolla caroliniana to remove heavy metals (Hg(II), Cr(III), Cr(VI)) from municipal waste water

The aim of this paper was to investigate the capacity of a small water fern, Azolla caroliniana Willd. (Azollaceae), to purify waters polluted by Hg and Cr. Many plants are capable of accumulating heavy metals (called hyperaccumulators) and one of them is the water fern A. caroliniana. During 12 days of the experiment the fern was grown on the nutrient solution containing Hg2+, Cr3+ and CrO4(2-) ions, each in a concentration 0.1, 0.5 and 1.0 mg dm(-3). The presence of these ions caused a 20-31% inhibition of A. caroliniana growth, the highest in the presence of Hg(II) ions, in comparison to the control. After day 12 of the experiment, metal contents the solution decreased to 0-0.25 mg dm(-3), and this decrease comprised between 74 (Cr3+ 1.0 mg dm(-3) treatment) and 100% (CrO4(2-) 0.1 mg dm(-3) treatment). The fern took a lesser quantity of the metals from 0.1 mg dm(-3) treatments compared to 0.5 and 1.0 mg dm(-3) treatments. In the A. caroliniana tissues the concentration of heavy metals under investigation ranged from 71 to 964 mg kg(-1) dm; the highest level being found for Cr(III) containing nutrient solution.     

Phosphorus losses to water from lowland rice fields under rice-wheat double cropping system in the Tai Lake region

To assess P losses to surface water by runoff during the rice season and by drainage flow during the winter wheat season, serial field trials were conducted in different types of paddy soils in the Tai Lake Region (TLR) during 2000 and 2001. Four P application rates were set as 0 (CK), 30, 150, and 300 kg P/hm2 for flooded rice trials and 0 (CK), 20, 80, 160 kg P/hm2 for winter wheat trials respectively. Field experiments were done in two locations with a plot size of 30 m2 and four replications in a randomized complete block design. A simplified lysimeter was installed for each plot to collect all the runoff or drainage flow from each event. Total P (TP) losses to surface water during rice season by runoff flow from four treatments were 150 (CK), 220 (T30), 395 (T150), 670 (T300) g P/ hm2 in year 2000, and 298, 440, 1828, 3744 g P/hm2 in year 2001 respectively in Wuxi station, here the soil is permeable paddy soil derived from loam clay deposit. While the losses were 102, 140, 210, 270 in year 2000, and 128, 165, 359, 589 g P/hm2 in year 2001 respectively in Changshu station, here the soil is waterlogged paddy soil derived from silt loam deposit. During the winter wheat season, total P lost from the fields by drainage flow in the four treatments were 253 (CK), 382 (T20), 580 (T89), 818 (T160) g P/hm2 in year 2000--2001, and 573.3, 709.4, 1123.2, 1552.4 g P/hm2 in year 2001--2002 at the Wuxi station. While these were 395.6, 539.1, 1356.8, 1972.1 g P/hm2 in year 2000--2001, and 811.5, 1184.6, 3001.2, 5333.1 g P/hm2 in year 2001--2002 at the Changshu station. Results revealed that P fertilizer application rates significantly affected the TP concentrations and TP loads in runoff during the rice season, and by drainage flow during the winter wheat season. Both TP loads were significantly increased as the P application rate increases. The data indicate that TP losses to surface water were much higher during the winter wheat season than during the rice season in two tested sites. The data also reveal that the annual precipitation and evaporation rate affected the soil P losses to surface water significantly. Year 2000 was relatively dried with higher evaporation thus P losses to water by both runoff and drainage flow were less than in year 2001 which was a relatively wet year with lower evaporation. Results indicate that texture, structure of the soil profile, and field construction (with or without ridge and deep drains) affected soil P losses to surface water dramatically. Annual possible TP lost to water at the application rate of 50 kg P/hm2 year tested in TLR were estimated from 97 to 185 tones P from permeable paddy soils and 109-218 tones P from waterlogged paddy soils. There was no significant difference of TP lost between the CK and the T50 treatments in both stations, which indicate that there is no more TP lost in field of normal P fertilizer application rate than in control field of no P fertilized. Much higher TP lost in runoff or drainage flow from those other P application rates treatments than from the T50 treatment, which suggest that P losses to surface water would be greatly increasing in the time when higher available P accumulation in plough layer soil in this region.     

Estrogenic effects of dissolved organic matter and its impact on the activity of 17β-estradiol

Background and purpose  

The ubiquitous dissolved organic matter (DOM) is actually not inert as we always think, and the hormone-like effects of DOM have been reported. The objective of this study was to investigate the estrogenic effects of DOM and its impact on the activity of the natural estrogen 17β-estradiol (E2).     

古运河(镇江段)沉积物酶活性及其与氮磷阴离子的相关性

以古运河镇江段为研究对象,研究了表层沉积物中碱性磷酸酶活性、硝酸还原酶活性和亚硝酸还原酶活性的时空变化以及3种酶活性与河流表层沉积物中氮磷阴离子浓度及上覆水水质的相关性。结果表明,镇江古运河表层沉积物中碱性磷酸酶活性、硝酸还原酶活性和亚硝酸还原酶活性具有显著的时间和区域性差异,枯水期(12月)各酶活性较高,分别介于0.29~0.32 mg/(g·24 h)、0.13~0.19 mg/(g·24 h)、3.05~5.21 mg/(g·24 h);丰水期(5月)各酶活性较低,变化范围分别为0.18~0.29 mg/(g·24 h)、0.08~0.14 mg/(g·24 h)、2.95~3.64 mg/(g·24 h)。冗余分析结果显示,古运河表层沉积物酶活性在枯水期差异较大,丰水期差异较小,各酶活性与其相关离子浓度呈显著正相关(P0.05),硝酸还原酶和亚硝酸还原酶与上覆水的水质呈正相关。3种酶活性可被作为判断古运河镇江段沉积物富营养化负荷的参考性指标,硝酸还原酶和亚硝酸还原酶还可作为评价古运河镇江段水质的参考性指标。     

Preparation of various thiol-functionalized carbon-based materials for enhanced removal of mercury from aqueous solution

In this work, biochar (BC), activated carbon (AC), and graphene oxide (GO) were thiol-functionalized using 3-mercaptopropyltrimethoxysilane (3-MPTS) (named as BCS, ACS, and GOS, respectively). BCS, ACS, and GOS were synthesized mainly via the interaction between hydrolyzed 3-MPTS and surface oxygen-containing functional groups (e.g., –OH, O–C=O, and C=O) and π-π interaction. The materials before and after modification were characterized and tested for mercury removal, including sorption kinetics and isotherms, the effects of adsorbent dosage, initial pH, and ionic strength. Pseudo-second-order sorption kinetic model (R² = 0.992~1.000) and Langmuir sorption isotherm model (R² = 0.964~0.998) fitted well with the sorption data of mercury. GOS had the most –SH groups with the largest adsorption capacity for Hg²⁺ and CH₃Hg⁺ (449.6 and 127.5 mg/g), followed by ACS (235.7 and 86.7 mg/g) and BCS (175.6 and 30.3 mg/g), which were much larger than GO (96.7 and 4.9 mg/g), AC (81.1 and 24.6 mg/g), and BC (95.6 and 9.4 mg/g). GOS and ACS showed stable mercury adsorption properties at a wide pH range (2~9) and ionic strength (0.01~0.1 mol/L). Mercury maybe removed by ligand exchange, surface complexation, and electrostatic attraction.

     

Coalbed methane produced water in China: status and environmental issues

As one of the unconventional natural gas family members, coalbed methane (CBM) receives great attention throughout the world. The major associated problem of CBM production is the management of produced water. In the USA, Canada, and Australia, much research has been done on the effects and management of coalbed methane produced water (CMPW). However, in China, the environmental effects of CMPW were overlooked. The quantity and the quality of CMPW both vary enormously between coal basins or stratigraphic units in China. The unit produced water volume of CBM wells in China ranges from 10 to 271,280 L/well/day, and the concentration of total dissolved solids (TDS) ranges from 691 to 93,898 mg/L. Most pH values of CMPW are more than 7.0, showing the alkaline feature, and the Na-HCO₃ and Na-HCO₃-Cl are typical types of CMPW in China. Treatment and utilization of CMPW in China lag far behind the USA and Australia, and CMPW is mainly managed by surface impoundments and evaporation. Currently, the core environmental issues associated with CMPW in China are that the potential environmental problems of CMPW have not been given enough attention, and relevant regulations as well as environmental impact assessment (EIA) guidelines for CMPW are still lacking. Other potential issues in China includes (1) water quality monitoring issues for CMPW with special components in special areas, (2) groundwater level decline issues associated with the dewatering process, and (3) potential environmental issues of groundwater pollution associated with hydraulic fracturing.     

Modelling feeding flow related shrinkage defects in aluminum castings

The process modelling of shape casting is geometrically complex and computationally very challenging. Besides the three-dimensional complex shapes with multiple domains, the defects of interest to industry arise as a consequence of the interaction amongst a range of phenomena. Conventionally, the key phenomena and defect prediction are modelled through empirical relations applied to the simulation results. Such approaches are neither comprehensive nor reliable. This paper presents a 3-D model that is capable of predicting the formation of shrinkage defects explicitly as a function of the interacting continuum phenomena, i.e. free surface flow, heat transfer, and solidification, in complex three-dimensional geometries which allows to identify the distinction between surface depression, surface connected cavities and internal cavities.The model solves the coupled macroscopic conservation equations for mass, momentum, and energy with a phase change during solidification. In the model, the volume deficit due to solidification can either be compensated by depression of the outside surface or by creating a cavity that initiates either on the surface or in the interior of the casting. The solidification morphology is taken into account by using a parameter, which depends on the fraction solid, in the momentum equation. By using an adapted free surface algorithm, it is suitable to predict surface connected defects: depressed surfaces and caved surfaces. A critical pressure serves as a criterion to open internal shrinkage cavities. The model does not need to search for connected zones to feed shrinkage, but the shrinkage distribution will automatically emerge from the continuity equation.This advanced shrinkage model has experimentally been validated successfully using two Al-Si alloys, a skin freezing eutectic alloy and a mushy freezing hypo-eutectic alloy.