Cork stoppers as an effective sorbent for water treatment: the removal of mercury at environmentally relevant concentrations and conditions

The technical feasibility of using stopper-derived cork as an effective biosorbent towards bivalent mercury at environmentally relevant concentrations and conditions was evaluated in this study. Only 25 mg/L of cork powder was able to achieve 94 % of mercury removal for an initial mercury concentration of 500 μg/L. It was found that under the conditions tested, the efficiency of mercury removal expressed as equilibrium removal percentage does not depend on the amount of cork or its particle size, but is very sensitive to initial metal concentration, with higher removal efficiencies at higher initial concentrations. Ion exchange was identified as one of the mechanisms involved in the sorption of Hg onto cork in the absence of ionic competition. Under ionic competition, stopper-derived cork showed to be extremely effective and selective for mercury in binary mixtures, while in complex matrices like seawater, moderate inhibition of the sorption process was observed, attributed to a change in mercury speciation. The loadings achieved are similar to the majority of literature values found for other biosorbents and for other metals, suggesting that cork stoppers can be recycled as an effective biosorbent for water treatment. However, the most interesting result is that equilibrium data show a very rare behaviour, with the isotherm presenting an almost square convex shape to the concentration axis, with an infinite slope for an Hg concentration in solution around 25 μg/L.     

Environmental impacts caused by cemeteries and crematoria,new funeral technologies,and preferences of the Northeastern and Southern Brazilian population as for the funeral process

Cemeteries and crematoria are the main funeral ways used in the world nowadays. It is a little-studied segment in the present days, mainly as for the possible environmental impacts in the environment, such as those derived from dental amalgam, prostheses, and dioxins, among other. This article aimed to identify the environmental impacts caused by cemeteries and crematoria and to point out new trends in funeral processes such as freeze-drying and alkaline hydrolysis. The study is justified due to the large part of the Brazilian population that do not know the environmental impacts caused by cemeteries and crematoria, as well as to bring information about the new processes. For that, a research was carried out with 400 people. The main results show that among all the funeral processes, the new freeze-drying process was opted by 33% of the sample. We also identified that the main reasons for choosing the funeral process were less environmental impact (28%), no after-death expenses (grave payment) (16.1%), and the possibility of putting away or throwing away the remains wherever you want (14.9%). Finally, new funeral processes were well accepted by the Brazilian population—those who were interviewed—due to their benefits.     

A socioeconomic and natural vulnerability index for oil spills in an Amazonian harbor: A case study using GIS and remote sensing

The coastal zone of the Brazilian state of Maranhão is an area characterized by a large variety of human activities and services, in particular in the Itaqui-Bacanga port complex (IBC). The IBC is an area prone to oil spills resulting from the processes of transportation, storage, and tank cleaning. The present study aimed to map the different physical environments adjacent to this complex and the socioeconomic profile of the local population that would be most vulnerable to this type of disaster. Vulnerability studies are essential as one of the first step in the development of an integrated coastal zone management. The variables analyzed in this study included geomorphological units, and the income, education, and dependence on fishing of the local population. The estimate of the vulnerability index was based on the relationships between these variables, which were used to generate a vulnerability map using GIS and the interpretation of high-resolution remote sensing, showing the areas of highest priority for intervention in the case of oil spills. The analysis of the natural and socioeconomic environments indicated that the areas of highest vulnerability correspond to the mangroves and the Vila Nova and Alto da Esperança neighborhoods, respectively. These neighborhoods have a direct relationship with fishing, and low levels of both income and education. By contrast, the lowest vulnerability was attributed to the coastal plateau and the central Anjo da Guarda neighborhood, which is occupied by residents with relatively high income and education, who do not depend on fishing.     

Addendum

Bags of S. auriculatum and a low‐volume aerosol sampler with filters were exposed, in parallel, to the urban atmosphere of Oporto at four sampling points and for about two months periods, between 1991 and 1994. The levels of lead in the moss (weekly samples) and in the filters (daily samples) were determined by atomic absorption spectrophotometry and the results were compared. In dry weather periods (relative humidity ≤ 76%) the rate of lead uptake by moss was approximately constant and proportional to the levels of the metal in atmospheric aerosols. A converting factor (CF = lPb_moss l (μg/g.day)/ l Pb_air l (μg/m³)) allowed conversion of the lead levels in S. auriculatum to those in the atmospheric aerosols. Because the moss fixed lead from gas, aerosol and particulated matter, the rate of sorption depends markedly on the distance to the lead sources (traffic) and on surrounding obstacles which retain particles. Therefore, specific calibration by mechanic monitoring at each point of sampling is required when moss bag samplers are used to provide quantitative information about lead levels in the atmosphere. In wet weather periods, higher but irregular rate of lead uptake was observed. In contrast, the lead levels in atmospheric aerosols decreased when the humidity increased due to wet deposition. Therefore, no proportionality between the lead levels in the moss and in the air were found.     

Use of the digestive gland of the oyster Crassostrea rhizophorae (Guilding, 1828) as a bioindicator of Zn,Cd and Cu contamination in estuarine sediments (south-east Brazil)

This study demonstrates the accumulation of Zn, Cd and Cu in the digestive gland of the oyster Crassostrea rhizophorae in response to the contamination of sediments and discusses the potential use of this specific organ in monitoring metal contamination in tropical areas. Sediment and oyster samples were collected from coastal Rio de Janeiro sites with different levels of human impact: Sepetiba Bay, Guanabara Bay and the Paraty coast. Metal concentrations were measured using inductively coupled plasma optical emission spectrometry (ICP OES). Significant statistical differences (p<0.001; p<0.05) were observed for Zn and Cd concentrations in the digestive gland; the highest Zn concentrations were found at Sepetiba, followed by Guanabara and Paraty. The highest digestive gland Cd concentrations were found at Paraty, followed by Sepetiba and Guanabara. These concentrations were proportional to those found in the sediments. There was no significant difference (p>0.05) in Cu among the sampling sites. The highest digestive-gland Cu concentration was also found at Sepetiba, followed by Guanabara. The biosediment accumulation factor indicated a gradient of sediment contamination for Zn and Cd. The digestive gland of C. rhizophorae can be a potential indicator of trace metal contamination in sediments from tropical estuarine environments.     

Bioremoval of diethylketone by the synergistic combination of microorganisms and clays: uptake, removal and kinetic studies

The performance of two bacteria, Arthrobacter viscosus and Streptococcus equisimilis, and the effect of the interaction of these bacteria with four different clays on the retention of diethylketone were investigated in batch experiments. The uptake, the removal percentages and the kinetics of the processes were determined. S. equisimilis, by itself, had the best performance in terms of removal percentage, for all the initial diethylketone concentrations tested: 200, 350 and 700 mg/L. The uptake values are similar for both bacteria. A possible mechanism to explain the removal of diethylketone includes its degradation by bacteria, followed by the adsorption of the intermediates/sub-products by the functional groups present on the cells' surfaces. The assays performed with bacteria and clays indicated that the uptake values are similar despite of the clay used, for the same microorganism and mass of clay, but in general, higher values are reached when S. equisimilis is used, compared to A. viscosus. Kinetic data were described by pseudo-first- and pseudo-second-order models.     

Core–shell magnetite-silica dithiocarbamate-derivatised particles achieve the Water Framework Directive quality criteria for mercury in surface waters

The sorption capacity of nanoporous titanosilicate Engelhard titanosilicate number 4 (ETS-4) and silica-coated magnetite particles derivatised with dithiocarbamate groups towards Hg(II) was evaluated and compared in spiked ultra-pure and spiked surface-river water, for different batch factors. In the former, and using a batch factor of 100 m³/kg and an initial Hg(II) concentrations matching the maximum allowed concentration in an effluent discharge, both materials achieve Hg(II) uptake efficiencies in excess of 99 % and a residual metal concentration lower than the guideline value for drinking water quality. For the surface-river water and the same initial concentration, the Hg(II) uptake efficiency of magnetite particles is outstanding, achieving the quality criteria established by the Water Framework Directive (concerning Hg concentration in surface waters) using a batch factor of 50 m³/kg, while the efficiency of ETS-4 is significantly inferior. The dissimilar sorbents’ Hg(II) removal efficiency is attributed to different uptake mechanisms. This study also highlights the importance of assessing the effective capacity of the sorbents under realistic conditions in order to achieve trustable results.     

The use of oxygen consumption and ammonium excretion to evaluate the toxicity of cadmium on Farfantepenaeus paulensis with respect to salinity

The main purpose of the present study was to detect the acute toxicity of cadmium (Cd) in F. paulensis and to investigate its effect on oxygen consumption and ammonium excretion different salinities. First, we examined the acute toxicity of Cd in F. paulensis at 24, 48, 72, and 96-h lethal concentration (LC50). Cd was significantly more toxic at 5 salinity than at 20 and 36. The oxygen consumption and ammonium excretion were estimated through experiments performed on each of the twelve possible combinations of three salinities (36, 20 and 5), at temperature 20 °C. Cd showed a reduction in oxygen consumption at 5 salinity, the results show that the oxygen consumption decreases with respect to the Cd concentration. At the highest Cd concentration employed (2 mg L⁻¹), the salinity 5 and the temperature at 20 °C, oxygen consumption decreases 53.7% in relation to the control. In addition, after separate exposure to Cd, elevation in ammonium excretion was obtained, wish were 72%, 65% and 95% higher than the control, respectively. The results show that Cd is more toxic to F. paulensis at lower salinities.     

Indoor Air Quality Assessment of Elementary Schools in Curitiba, Brazil

The promotion of good indoor air quality in schools is of particular public concern for two main reasons: (1) school-age children spend at least 30% of their time inside classrooms and (2) indoor air quality in urban areas is substantially influenced by the outdoor pollutants, exposing tenants to potentially toxic substances. Two schools in Curitiba, Brazil, were selected to characterize the gaseous compounds indoor and outdoor of the classrooms. The concentrations of benzene, toluene, ethylbenzene, and the isomers xylenes (BTEX); NO₂; SO₂; O₃; acetic acid (HAc); and formic acid (HFor) were assessed using passive diffusion tubes. BTEX were analyzed by gas chromatography–ion trap mass spectrometry and other collected gasses by ion chromatography. The concentration of NO₂ varied between 9.5 and 23?µg m^?3, whereas SO₂ showed an interval from 0.1 to 4.8?µg m^?3. Within the schools, BTEX concentrations were predominant. Formic and acetic acids inside the classrooms revealed intermediate concentrations of 1.5?µg m^?3 and 1.2?µg m^?3, respectively.