Fine and coarse particulate matter chemical characterization in a heavily industrialized city in central Mexico during Winter 2003

This paper presents the results of the first reported study on fine particulate matter (PM) chemical composition at Salamanca, a highly industrialized urban area of Central Mexico. Samples were collected at six sites within the urban area during February and March 2003. Several trace elements, organic carbon (OC), elemental carbon (EC), and six ions were analyzed to characterize aerosols. Average concentrations of PM with aerodynamic diameter of less than 10 microm (PM10) and fine PM with aerodynamic diameter of less than 2.5 microm (PM2.5) ranged from 32.2 to 76.6 [g m(-3) and 11.1 to 23.7 microg m(-3), respectively. OC (34%), SO4= (25.1%), EC (12.9%), and geological material (12.5%) were the major components of PM2.5. For PM10 geological material (57.9%), OC (17.3%), and SO4= (9.7%) were the major components. Coarse fraction (PM,, -PM2.5), geological material (81.7%), and OC (8.6%) were the dominant species, which amounted to 90.4%. Correlation analysis showed that sulfate in PM2.5 was present as ammonium sulfate. Sulfate showed a significant spatial variation with higher concentrations to the north resulting from predominantly southwesterly winds above the surface layer and by major SO2 sources that include a power plant and refinery. At the urban site of Cruz Roja it was observed that PM2.5 mass concentrations were similar to the submicron fraction concentrations. Furthermore, the correlation between EC in PM2.5 and EC measured from an aethalometer was r(2) = 0.710. Temporal variations of SO2 and nitrogen oxide were observed during a day when the maximum concentration of PM2.5 was measured, which was associated with emissions from the nearby refinery and power plant. From cascade impactor measurements, the three measured modes of airborne particles corresponded with diameters of 0.32, 1.8, and 5.6 microm.     

Relationship between geographical origin and contents of Pb,Cd, and Cr in honey samples from the state of Paraná (Brazil) with chemometric approach

The aim of this study was to determine the trace elements, Pb, Cd, and Cr in honey samples from eight different regions from the state of Paraná (Brazil), using slurry sampling graphite furnace atomic absorption spectrometry. Chemometric analysis (principal component analysis (PCA)) was applied to classify honey samples according to their levels of the trace elements Pb, Cd, and Cr, which is also related to the geographical origin of honey samples. The mean concentration for the elements followed the order Pb?>?Cr >?>?Cd. The mean values were 200?±?76, 88?±?14, and 4.1?±?4 ng g^?1 for Pb, Cr, and Cd, respectively. It could be verified that honey samples are geographically separated, especially with regard to Pb and Cd contents. Thus, honey can be considered a bioindicator of environmental contamination, suggesting possible contamination in soil, water, and air. This contamination can be related to natural or anthropogenic sources present in the study regions.     

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile

The size distribution of particles has been studied in three sites in the Metropolitan area of Santiago de Chile in the winter of 2009 and a comparison with black carbon was performed. Two sites are located near busy streets in Santiago and the other site is located in a rural area about 40 km west of Santiago with little influence from vehicles, but large influence from wood burning. The campaign lasted 1 or 2 weeks in each site. We have divided the particle size measurements into four groups (10–39 nm, 40–62 nm, 63–174 nm, and 175–700 nm) in order to compare with the carbon monitor. In the sites near the street, black carbon has a high correlation (R ? 0.85) with larger particles (175–700 nm). The correlation decreased when black carbon was compared with smaller particles, having very small correlation with the smallest sizes (10–39 nm). In the rural site, black carbon also has a high correlation (R = 0.86) with larger particles (175–700 nm), but the correlation between black carbon and the finest particles (10–39 nm) decreases to near 0. These measurements are an indication that wood burning does not generate particles smaller than ?50 nm. In the urban sites, particle size distribution is peaked toward smaller particles (10–39 nm) only during rush hours, but at other times, particles size distribution is peaked toward larger sizes. When solar radiation was high, evidence of secondary particle formation was seen in the rural site, but not in the urban sites. The correlation between the number of secondary particles and solar radiation was R² = 0.46, indicating that it there may be other variables that play a role in ultrafine particle formation.

Implications:A study of the size distribution of particles and black carbon concentration in two street sites and one rural site shows that in the last site the number of particles ultrafine particles (d < 40 nm) is 10 times lower but the number of larger particles is about 2 times lower. Thus, the rural site has less of the particles that are more dangerous to health. The number of ultrafine particles is mostly associated with traffic, while the number of larger particles is associated with wood burning and other sources. Wood burning does not generate particles smaller than ?50 nm.     

How violence against women and girls undermines resilience to climate risks in Chad

What consequences does ‘everyday violence’ have on the abilities of survivors to protect themselves from further risks? This paper seeks to establish the linkages between violence and people's resilience capacities to survive and adapt to environmental changes, particularly those living in fragile economic and political contexts such as Chad. It investigates not only how the adverse consequences of violence against women and girls affect the health status and livelihoods of survivors, but also their capacities, and those of their household and community members, to further protect themselves from other risks. Empirical evidence collected in Chad as part of the BRACED (Building Resilience and Adaptation to Climate Extremes and Disasters) programme shows that ‘everyday violence’ undermines resilience‐building at the individual, household, and community level. These results have serious implications for development programmes and the role they need to play to better promote both gender equality and resilience to shocks and stresses.     

Effect of initial sulfide concentration on sulfide and phenol oxidation under denitrifying conditions

The objective of this work was to evaluate the effect of the initial sulfide concentration on the kinetics and metabolism of phenol and sulfide in batch bioassays using nitrate as electron acceptor. Complete oxidation of sulfide (20 mg L(-1) of S(2-)) and phenol (19.6 mg L(-1)) was linked to nitrate reduction when nitrate was supplemented at stoichiometric concentrations. At 32 mg L(-1) of sulfide, oxidation of sulfide and phenol by the organo-lithoautotrophic microbial culture was sequential; first sulfide was rapidly oxidized to elemental sulfur and afterwards to sulfate; phenol oxidation started once sulfate production reached a maximum. When the initial sulfide concentration was increased from 20 to 26 and finally to 32 mg L(-1), sulfide oxidation was inhibited. In contrast phenol consumption by the denitrifying culture was not affected. These results indicated that sulfide affected strongly the sulfide oxidation rate and nitrate reduction.     

Stoichiometric and molecular evidence for the enrichment of anaerobic ammonium oxidizing bacteria from wastewater treatment plant sludge samples

Anammox enrichments were readily developed from seven municipal wastewater treatment plants (WWTPs) sludge, but not with methanogenic granular sludge from two agro-industrial WWTPs. Only 50 d was required for the first evidence of anammox activity from a return activated sludge obtained from a WWTP operated for nutrient removal. The molar ratios of nitrite and ammonium consumption of approximately 1.32 as well as nitrate and dinitrogen gas product ratios of approximately 0.095 provided evidence of the anammox reaction. The presence of anammox was confirmed by polymerase chain reaction (PCR) using primer sets (PLA46F and AMX820R) specific for anammox bacteria. The 16S rRNA gene fragment of anammox bacteria was detected in seven enrichment cultures (ECs) with demonstrated anammox activity but not in the original inocula from which the ECs were derived and also not in the two methanogenic sludge samples, which indicates the PCR predicted the anammox activity. Two genera, Brocadia and Kuenenia, were successfully identified as the Planctomycetes occurring in the clone libraries of successful anammox enrichments. Brocadia dominated in cultures that were respiked extensively; whereas Kuenenia predominated in cultures that were less aggressively respiked. These findings indicate that respiking management may play an important role on selecting the genus of anammox bacteria. The batch enrichment results clearly illustrate that anammox can be readily enriched from municipal sludge from a wide variety of process operations at WWTPs.     

Value in sustainability: the process industry perspective

The most important driver for management is successful business that increases its value to shareholders. The adoption of environmentally responsible business practices can open up an additional range of opportunities for companies, for example by improving material efficiency. The choice to improve environmental performance of a company tends to also improve its financial performance. In this paper, our aim is to study the value of sustainability in process and mining industry from the perspective of interest groups such as investors, customers and the public, by using case examples. Interviews and workshops were employed to investigate whether or not investors and customers are interested in sustainability in the process and mining industries. We also illustrate how easy it can be to jeopardize corporate reputation through. The present situation and challenges faced in bringing sustainability into everyday business practices are summarized and proposals made concerning ways to achieve increased sustainability.     

On spline-based approaches to spatial linear regression for geostatistical data

For spatial linear regression, the traditional approach to capture spatial dependence is to use a parametric linear mixed-effects model. Spline surfaces can be used as an alternative to capture spatial variability, giving rise to a semiparametric method that does not require the specification of a parametric covariance structure. The spline component in such a semiparametric method, however, impacts the estimation of the regression coefficients. In this paper, we investigate such an impact in spatial linear regression with spline-based spatial effects. Statistical properties of the regression coefficient estimators are established under the model assumptions of the traditional spatial linear regression. Further, we examine the empirical properties of the regression coefficient estimators under spatial confounding via a simulation study. A data example in precision agriculture research regarding soybean yield in relation to field conditions is presented for illustration.     

Effects of moisture damage and renovation on microbial conditions and pupils' health in two schools--a longitudinal analysis of five years

Airborne microbes and pupils' symptoms were monitored in a moisture-damaged (index) school and a reference school for five consecutive years. These surveys were carried out in two separate years before the renovation of the index school, during the renovation, and one and two years after the renovation. Microbial concentrations were higher in the index school than those in the reference school before and during renovation, but afterwards, the levels decreased to the level of the reference school. The effect of remediation was seen as an altered mycobiota in the index school. Year-to-year variation of microbial concentrations, probably due to climatic factors, caused a peak in both schools but their difference remained. Several symptoms were more prevalent in the moisture-damaged school than in the reference school, but the differences disappeared during the renovations. These results emphasize the importance of using a reference building in assessing the microbial conditions of a moisture damaged building. Furthermore, microbial concentrations reflected well the technical condition of the construction, but the reported symptoms of the occupants did not strictly follow the timely fluctuation in microbial conditions.