Sorption mechanisms of cephapirin, a veterinary antibiotic, onto quartz and feldspar minerals as detected by Raman spectroscopy

Raman spectroscopy was used to investigate sorption mechanisms of cephapirin (CHP), a veterinary antibiotic, onto quartz (SiO₂) and feldspar (KAlSi₃O₈) at different pH. Sorption occurs by electrostatic attraction, monodentate and bidentate complexation. The zwitterion (CHP^o) adsorbs to a quartz⁽⁺⁾ surface by electrostatic attraction of the carboxylate anion group (-COO⁻) at low pH, but adsorbs to a quartz⁽⁻⁾ surface through electrostatic attraction of the pyridinium cation, and possibly COO⁻ bridge complexes, at higher pH. CHP⁻ bonds to quartz⁽⁻⁾ surfaces by bidentate complexation between one oxygen of -COO⁻ and oxygen from carbonyl of an acetoxymethyl group. On a feldspar^(+/−) surface, CHP^o forms monodentate complexes between CO, and possible -COO⁻ bridges and/or electrostatic attachments to localized edge (hydr)oxy-Al surfaces. CHP⁻ adsorbs to feldspar⁽⁻⁾ through monodentate CO complexation. Similar mechanisms may operate for other cephalosporins. Results demonstrate, for the first time, that Raman techniques can be effective for evaluating sorption mechanisms of antibiotics.     

A revisit of trisomy 20 mosaicism in prenatal diagnosis—an overview of 103 cases

One hundred and three cases with prenatal diagnosis of trisomy 20 mosaicism through amniocentesis were reviewed. Approximately 90 per cent (90/101) of the cases were associated with grossly normal phenotype. It is likely that, in the majority of cases, cells with trisomy 20 were extraembryonic in origin or largely confined to the placenta. However, in some cases, the cells with trisomy 20 were confined to certain specific fetal organs or tissues such as kidney, skin, etc. Cytogenetic follow-up studies in liveborns should include a culture from urine sediment.     

Aggregation of Adenovirus 2 in Source Water and Impacts on Disinfection by Chlorine

It is generally accepted that viral particles in source water are likely to be found as aggregates attached to other particles. For this reason, it is important to investigate the disinfection efficacy of chlorine on aggregated viruses. A method to produce adenovirus particle aggregation was developed for this study. Negative stain electron microscopy was used to measure aggregation before and after addition of virus particles to surface water at different pH and specific conductance levels. The impact of aggregation on the efficacy of chlorine disinfection was also examined. Disinfection experiments with human adenovirus 2 (HAdV2) in source water were conducted using 0.2 mg/L free chlorine at 5 °C. Aggregation of HAdV2 in source water (≥3 aggregated particles) remained higher at higher specific conductance and pH levels. However, aggregation was highly variable, with the percentage of particles present in aggregates ranging from 43 to 71 %. Upon addition into source water, the aggregation percentage dropped dramatically. On average, chlorination CT values (chlorine concentration in mg/L × time in min) for 3-log₁₀ inactivation of aggregated HAdV2 were up to three times higher than those for dispersed HAdV2, indicating that aggregation reduced the disinfection rate. This information can be used by water utilities and regulators to guide decision making regarding disinfection of viruses in water.     

PESTICIDE ACCUMULATION IN A NEW IMPOUNDMENT IN IOWA1

ABSTRACT: Estimates were made of the amounts of selected pesticides entering and leaving Saylorville Reservoir, a new partly filled impoundment on the Des Moines River. Samples were collected at 1– or 2-week intervals at stations above, in, and below the reservoir. Atrazine, alachlor, and cyanazine were found only in the dissolved state, and dieldrin and p, p′ -DDE in both the, dissolved and suspended state. Heptachlor epoxide, p,p-DDT. p, p′ -DDD, 2,4-D, 2,4,5-TP, endrin, lindane, methoxychlor, propachlor, and toxaphene were not detected or were at very low concentrations. Estimated deposition in the reservoir from September 1977 to October 1978 was 281 kg atrazine, 251 kg alachlor, 26 kg cyanazine, 16 kg dieldrin, and 20 kg p, p′ -DDE.     

AN IMPLICIT APPROACH TO PRICING AGRICULTURAL WATER TRANSFERS TO URBAN USES1

ABSTRACT: The increased agricultural efficiency of the American farmer has been a substantial impetus to this nation's rapid urbanization. In many western regions where total water supplies are limited, urbanization has required the transfer of heretofore agricultural water rights to the urban use. A major problem in such transfers has been the value or price of the water. A management level model of a typical urban water system was developed to optimize water supply, distribution, and wastewater treatment alternatives. The values of agricultural transfers were determined as the cost advantages of increasing allowable reuse levels of urban effluents which imply the use of a downstream right. This procedure is justified by the economic theory of alternative cost. Results for a test application to the Denver, Colorado area indicate values on the order of $1,000 per acre-foot of transferable water depending on effluent water quality restrictions and operational policies.     

A Profile and Management of the US Army's underground storage tanks

The US Army owns more than 10,000 underground storage tanks (USTs), many of which are old and may be leaking. The Resource Conservation and Recovery Act of 1976 required tank owners to collect and report data on them by May 1986. In order to manage the large amounts of information on its USTs, the Army developed a microcomputer-based data base system. The data base system is user friendly and allows the user to store, organize, and manipulate the UST data. A leak potential index (LPI) was also developed and calculated for each of the Army's USTs. The LPI is used to prioritize USTs so that those with higher LPIs can be monitored closely. A characteristic profile of Army USTs according to construction material, capacity, age, content, and LPI is presented in this paper.The opinions expressed in this paper are those of the authors and do not necessarily reflect the views of the US Department of the Army, nor does the mention of trade names or commercial products constitute endorsement or recommendation for use.     

Development of bacteria and benthic total maximum daily loads: a case study, Linville Creek, Virginia

Two total maximum daily load (TMDL) studies were performed for Linville Creek in Rockingham County, Virginia, to address bacterial and benthic impairments. The TMDL program is an integrated watershed management approach required by the Clean Water Act. This paper describes the procedures used by the Center for TMDL and Watershed Studies at Virginia Tech to develop the Linville Creek TMDLs and discusses the key lessons learned from and the ramifications of the procedures used in these and other similar TMDL studies. The bacterial impairment TMDL was developed using the Hydrological Simulation Program-Fortran (HSPF). Fecal coliform loads were estimated through an intensive source characterization process. The benthic impairment TMDL was developed using the Generalized Watershed Loading Function (GWLF) model and the reference watershed approach. The bacterial TMDL allocation scenario requires a 100% reduction in cattle manure direct-deposits to the stream, a 96% reduction in nonpoint-source loadings to the land surface, and a 95% reduction in wildlife direct-deposits to the stream. Sediment was identified as the primary benthic stressor. The TMDL allocation scenario for the benthic impairment requires an overall reduction of 12.3% of the existing sediment loads. Despite the many drawbacks associated with using watershed-scale models like HSPF and GWLF to develop TMDLs, the detailed watershed and pollutant-source characterization required to use these and similar models creates information that stakeholders need to select appropriate corrective measures to address the cause of the water quality impairment when implementing the TMDL.