A fully reproductive fighting morph in a soldier clade of gall-inducing thrips (Oncothrips morrisi)

We present the first life history data for Oncothrips morrisi, a species in a clade of haplodiploid, Australian gall-inducing thrips that has a micropteran fighting morph in the first generation of the gall. Micropterans in other species in the clade have lower fecundity than their mother, and these species are considered eusocial. There is no such reproductive skew in O. morrisi, and the species is not eusocial by any definition. The volume of O. morrisi galls is between 4 and 20 times greater in than eusocial species in the clade and the dispersing-brood size varies between 5 and 15 times larger than that of other species. The lack of skew in O. morrisi could be associated with large gall volume, reducing competition between females for space and feeding sites for their offspring. As O. morrisi is in a lineage basal to eusocial Oncothrips, we also discuss selective factors for the evolution of a non-dispersing fighting morph in this clade. The costs involved in dispersal and latency to reproduction may have lowered the selective threshold for the evolution of a non-dispersing morph. Once non-dispersal evolved, selection to defend one's offspring may have promoted the evolution of soldier-like morphology and behaviour.     

The economics of harem maintenance in the sac-winged bat, Saccopteryx bilineata (Emballonuridae)

Saccopteryx bilineata has a polygynous mating system in which males defend females in a harem territory. Harem defense and courtship include energetically costly flight maneuvers and hovering displays. We tested if (1) harem males have a greater field metabolic rate than non-harem males or females and if (2) the field metabolic rate of harem males is correlated with the number of females in a harem territory. We measured the energy budget in 32 S. bilineata with the doubly labeled water method and compared these estimates with behavioral observations in the daytime roost. Among adult bats, field metabolic rate varied with body mass by an exponent of approximately two. We found no significant difference in field metabolic rate or mass-specific field metabolic rate between harem and non-harem males. The mass-specific field metabolic rate of harem-males increased with harem size. The latter finding supports the hypothesis that the energy costs of courtship display and territorial defense influence the energy budget of harem males. Overall, field metabolic rates of S. bilineata were lower than those of similarly sized bats of the temperate zone and only 2.3 times above the basal metabolic rate recorded for this species. We suggest that male S. bilineata did not take advantage of their metabolic capacity because a prudent allocation of energy to activities of harem maintenance is an adaptive strategy for males in this mating system.     

Diel Cycling of Zinc in a Stream Impacted by Acid Rock Drainage: Initial Results from a New in situ Zn Analyzer

Recent work has demonstrated that many trace metals undergo dramatic diel (24-h) cycles in near neutral pH streams with metal concentrations reproducibly changing up to 500% during the diel period (Nimick et al., 2003). To examine diel zinc cycles in streams affected by acid rock drainage, we have developed a novel instrument, the Zn-DigiScan, to continuously monitor in situ zinc concentrations in near real-time. Initial results from a 3-day deployment at Fisher Creek, Montana have demonstrated the ability of the Zn-DigiScan to record diel Zn cycling at levels below 100 μg/l. Longer deployments of this instrument could be used to examine the effects of episodic events such as rainstorms and snowmelt pulses on zinc loading in streams affected by acid rock drainage.     

Advantages and possibilities of solid recovered fuel cocombustion in the European energy sector

The 1999/31 Elemental Carbon Directive sets strict rules on the disposal of untreated municipal solid waste in the European Union countries and forces a reduction of the biodegradable quantities disposed off to landfills up to 35% of the amount produced in 1995 in the coming decade. More environmentally friendly waste management options shall be promoted under the framework of the Community Waste Strategy ([96] 399 Final). In this context, the production and thermal use of solid recovered fuels (SRFs), derived from nonhazardous bioresidues and mixed- and mono-waste streams, could be a key element in a future waste management system. Within the scope of the European Demonstration Project, RECOFUEL, SRF cocombustion was demonstrated in two large-scale lignite-fired coal boilers at RWE power station in Weisweiler, Germany. As a consequence of the high biogenic share of the cocombusted material, this approach can be considered beneficial following European Directive 2001/77/EC on electricity from renewable energy sources (directive). During the experimental campaign, the share of SRF in the overall thermal input was adjusted to approximately 2%, resulting into a feeding rate of approximately 25 t/hr. The measurement campaign included boiler measurements in different locations, fuel and ash sampling, and its characterization. The corrosion rates were monitored by dedicated corrosion probes. The overall results showed no significant influence of SRF cocombustion on boiler operation, emissions behavior, and residues quality for the thermal shares applied. Also, no effect of the increased chlorine concentration of the recovered fuel was observed in the flue gas path after the desulfurization unit.     

Fast characterization of non domestic load in urban wastewater networks by UV spectrophotometry

Urban wastewater treatment plant efficiency, as well as biosolid quality, depends on urban wastewater quality, which can be affected by non domestic discharges (industrial, commercial etc.). The characterization of wastewater quality and non domestic discharge is complex, expensive and time consuming. However, these discharges must be controlled and reduced if possible. The development of a simple and fast methodology, namely based on alternative methods such as UV spectrophotometry, has been carried out and applied to different areas of a medium sized town of Southern Québec (Canada). Several autosamplers and on line/on site measurements have been used in critical control points of the network areas, for a dry weather campaign in four areas (industrial, commercial, hospital and university). The flow rate study, completed by the exploitation of conductivity measurements and the qualitative examination of UV spectra allows the discrimination of non domestic loads and their variability study from one point to another. The identification of critical discharges and organic shock loads has been possible with low investment, and mitigation actions have been proposed.     

Eco-Labelling of Shampoos,Shower Gels and Foam Baths (6 pp)

GOAL, SCOPE AND BACKGROUND: Environmental issues of personal care products have been met with little attention in the past. Monitoring data as well as preliminary environmental risk assessments indicate that some ingredients in personal care products might be relevant pollutants in the environment. Following the precautionary principle, eco-labelling is proposed as an effective tool for source control of one major group of personal care products, shampoos, shower gels and foam baths (SSBs). Eco-labelling is a soft, but effective market driven and product specific approach to lower discharge of environmentally detrimental substances. Products that fulfil the criteria proposed help to minimise the impact of SSBs on the environment. METHODS: Available assessment tools for dangerous substances (e.g. current legislation on environmental risk assessments and classification, and labelling, eco-labelling criteria for similar products, the calculation of the critical dilution volume) were adapted and integrated into the criteria for the eco-labelling of SSBs. RESULTS AND DISCUSSION: A short outline of the eco-labelling criteria developed for SSBs is provided. The basic criteria concern the effects of the substances discharged into the waste water during and after use. Products with an eco-label award may exclusively contain substances for which basic information about their effects on the environment is available. They may not contain persistent, bioaccumulating, toxic or ecotoxicological substances. In addition, the basic criteria include requirements for the container and consumer information. CONCLUSION: The basic criteria for eco-labelling SSBs are based on the actual state of science and are at the same time as simple and transparent as possible to ensure the best applicability. SSBs that comply with the described basic criteria can contribute to a lower chemical burden of waste water treatment plants and surface water. RECOMMENDATION AND OUTLOOK: The proposal for basic criteria described should stimulate discussion on eco-labelling of SSBs. It should help to pass valid criteria supported by authorities, producers and consumer groups for a national or international eco-label, e.g. for the European Flower or the German Blue Angel. In future, the successful introduction of labelled SSBs into the market will raise the awareness of the general public about the environmental effects of personal care products and it will help to promote environmentally compatible products.     

An assessment of the environmental and socio-economic impacts of alien rabbits and hares

Directly comparable data on the environmental and socio-economic impacts of alien species informs the effective prioritisation of their management. We used two frameworks, the Environmental Impact Classification for Alien Taxa (EICAT) and Socio-Economic Impact Classification for Alien Taxa (SEICAT), to create a unified dataset on the severity and type of impacts caused by alien leporids (rabbits and hares). Literature was reviewed to collate impact data, which was categorised following EICAT and SEICAT guidelines. We aimed to use these data to identify: (1) alien leporid species with severe impacts, (2) their impact mechanisms, (3) the native species and local communities vulnerable to impacts and (4) knowledge gaps. Native species from a range of taxonomic groups were affected by environmental impacts which tended to be more damaging than socio-economic impacts. Indirect environmental impacts were particularly damaging and underreported. No impact data were found for several alien leporid species.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01642-7.     

Implications of differing input data sources and approaches upon forest carbon stock estimation

Site index is an important forest inventory attribute that relates productivity and growth expectation of forests over time. In forest inventory programs, site index is used in conjunction with other forest inventory attributes (i.e., height, age) for the estimation of stand volume. In turn, stand volumes are used to estimate biomass (and biomass components) and enable conversion to carbon. In this research, we explore the implications and consequences of different estimates of site index on carbon stock characterization for a 2,500-ha Douglas-fir-dominated landscape located on Eastern Vancouver Island, British Columbia, Canada. We compared site index estimates from an existing forest inventory to estimates generated from a combination of forest inventory and light detection and ranging (LIDAR)-derived attributes and then examined the resultant differences in biomass estimates generated from a carbon budget model (Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3)). Significant differences were found between the original and LIDAR-derived site indices for all species types and for the resulting 5-m site classes (p?<?0.001). The LIDAR-derived site class was greater than the original site class for 42% of stands; however, 77% of stands were within ±1 site class of the original class. Differences in biomass estimates between the model scenarios were significant for both total stand biomass and biomass per hectare (p?<?0.001); differences for Douglas-fir-dominated stands (representing 85% of all stands) were not significant (p?=?0.288). Overall, the relationship between the two biomass estimates was strong (R ²?=?0.92, p?<?0.001), suggesting that in certain circumstances, LIDAR may have a role to play in site index estimation and biomass mapping.     

Ground level volume mixing ratio of methane in a tropical coastal city

Urban regions are hotspots of greenhouse gas emissions which include CO₂, CH₄, N₂O, etc. Methane is a strong greenhouse gas which is produced from a number of sources including fossil fuel combustion, municipal waste, and sewage processing, etc. Ground level mixing ratio of methane in the tropical coastal city of Thiruvananthapuram in South India, during calm early morning period was measured. Measurements were done during both winter and summer seasons. Concentrations were significantly higher than global average value. Intra-city variation in ground level mixing ratio was also significant. Ground level methane concentration at Thiruvananthapuram urban area showed maximum value of 3.16 ppmV. Under stable atmospheric conditions in early morning, ground level mixing ratio of methane was 2.79 ppmV in winter and 2.54 ppmV during summer. The spatial distribution of methane concentration shows correlation with urban heat island.     

Development of a Pollination Service Measurement (PSM) method using potted plant phytometry

The value of pollination to human society is not limited to agricultural production, but also in the sustainability of ecosystems and the services that they provide. Seed set can be used as a comparative measure of pollination effectiveness, with minimum variability expected when other resources are not limiting. Six species of self-incompatible fall asters (Symphyotrichum) were used to evaluate pollination service at 12 sites across a spectrum of expected levels of pollination. Seed set per inflorescence was generally lower at sites with lower pollinator numbers and diversity, although as expected pollinator assemblage characteristics were highly variable within and between sites. However, rankings of sites showed consistency of response across phytometer species and between years; the summed ranks across multiple species appears to have as the greatest value in Pollination Service Measurement (PSM). Abundance, richness, and Shannon diversity of pollinator assemblages were highly autocorrelated and showed variable relationships with seed set depending on plant species and temporal scale of pollinator assemblage assessment. Use of seed set to directly measure pollination service at a site was consistent and cost effective when compared to less certain and more labour-intensive methods of pollinator collection and identification, and shows promise for implementation in pollination monitoring and bioassessment practices.