Hands on explosives: Safety testing of protective measures

Several attempts have been made to test the suitability of protective measures for the handling of explosives. We investigated the suitability of safety gloves and a combined safety helmet and face shield. In the presented studies, three different experimental setups were used to simulate the effects of an explosion of a primary explosive in a glass flask on the glove or helmet protected body. Depending on the experimental setup, the fragment effects were evaluated and compared. Furthermore, the fragment distribution of an explosion inside a glass flask was investigated. The explosion of 1 g of lead azide in a 10 mL flask yielded approximately 14,000 glass fragments. However, most of the shards were accelerated down- and side-wards and only few upwards. Holding a flask on its neck (instead of its bottom) is therefore a simple but effective way of diminishing the risk of injury, when handling explosives. The safety helmet/face shield performed very well, by shielding the face from all fragments. Furthermore, it could be proven that DIN and EN standard testing procedures for gloves are unsuitable to simulate the effects of a respective explosion.In this article, the progress in the development of realistic testing procedures for the testing of gloves for the protection against fragmentation effects of glassware in situations involving explosions is reported and the results and methods of previous tests are summarized.     

The Researcher's Notebook: Mission and scope

Order and simplification are the first steps toward the mastery of a subject—the actual enemy is the unknown.

相似文献   

Prenatal cannibalism in an insect

Host selection and infection strategies of parasitoids often correlate with high parental investment and low numbers of progeny. In this study, we investigate how additional internal mechanisms might shape brood size and fitness of the offspring. Emblemasoma auditrix is a parasitoid fly in which about 38 larvae hatch simultaneously in utero. After host location, a single larva is deposited into the host, where it rapidly develops and pupates after about 5 days. The search for hosts can take several weeks, and during that time, the larvae arrest their development and remain in the first larval instar. Nevertheless, the larvae increase in weight within the uterus, and this growth correlates to a decrease in the number of larvae, although no larvae are deposited. Thus, our data indicate a first case of prenatal cannibalism in an invertebrate with larvae feeding on each other within the uterus of the adult.     

Body mass estimations for <Emphasis Type="Italic">Plateosaurus engelhardti</Emphasis> using laser scanning and 3D reconstruction methods

Both body mass and surface area are factors determining the essence of any living organism. This should also hold true for an extinct organism such as a dinosaur. The present report discusses the use of a new 3D laser scanner method to establish body masses and surface areas of an Asian elephant (Zoological Museum of Copenhagen, Denmark) and of Plateosaurus engelhardti, a prosauropod from the Upper Triassic, exhibited at the Paleontological Museum in Tübingen (Germany). This method was used to study the effect that slight changes in body shape had on body mass for P. engelhardti. It was established that body volumes varied between 0.79 m³ (slim version) and 1.14 m³ (robust version), resulting in a presumable body mass of 630 and 912 kg, respectively. The total body surface areas ranged between 8.8 and 10.2 m², of which, in both reconstructions of P. engelhardti, ∼33% account for the thorax area alone. The main difference between the two models is in the tail and hind limb reconstruction. The tail of the slim version has a surface area of 1.98 m², whereas that of the robust version has a surface area of 2.73 m². The body volumes calculated for the slim version were as follows: head 0.006 m³, neck 0.016 m³, fore limbs 0.020 m³, hind limbs 0.08 m³, thoracic cavity 0.533 m³, and tail 0.136 m³. For the robust model, the following volumes were established: 0.01 m³ head, neck 0.026 m³, fore limbs 0.025 m³, hind limbs 0.18 m³, thoracic cavity 0.616 m³, and finally, tail 0.28 m³. Based on these body volumes, scaling equations were used to assess the size that the organs of this extinct dinosaur have.     

Database-driven models of the world's Large Marine Ecosystems

We present a new methodology for database-driven ecosystem model generation and apply the methodology to the world's 66 currently defined Large Marine Ecosystems. The method relies on a large number of spatial and temporal databases, including FishBase, SeaLifeBase, as well as several other databases developed notably as part of the Sea Around Us project. The models are formulated using the freely available Ecopath with Ecosim (EwE) modeling approach and software. We tune the models by fitting to available time series data, but recognize that the models represent only a first-generation of database-driven ecosystem models. We use the models to obtain a first estimate of fish biomass in the world's LMEs. The biggest hurdles at present to further model development and validation are insufficient time series trend information, and data on spatial fishing effort.     

绿矾处理垃圾焚烧灰渣过程中重金属的同时稳定化研究

采用绿矾稳定垃圾焚烧灰渣(包括飞灰及底排渣)中的重金属,将绿矾溶液与灰渣混合然后实施氧化过程．以Pb,Hg,Cd,As和Cr为代表,研究各类重金属同时稳定化的反应条件,着重研究了铬的稳定条件研究结果表明重金属Pb在各种条件下的稳定效果良好;As和Cd的稳定化效果随绿矾用量的增加而增强,其中Cd还受过程pH值的影响．厌氧阶段的设置、CO2的辅助处理、提高绿矾的用量都有助于Cr的稳定化;同时使用CO2辅助处理也有助于As的稳定化,但CO2只适用于强碱性、高酸中和能力的灰渣．反应温度在常温至90℃变化只影响氧化速度．研究还表明飞灰与底排渣可作为一股废物流同时处理．对Hg,应从研究其物质形态出发来研究它的稳定．     

Characterization of maspardin, responsible for human Mast syndrome, in an insect species and analysis of its evolution in metazoans

Mast syndrome is a complicated form of human hereditary spastic paraplegias, caused by a mutation in the gene acid cluster protein 33, which encodes a protein designated as “maspardin.” Maspardin presents similarity to the α/β-hydrolase superfamily, but might lack enzymatic activity and rather be involved in protein–protein interactions. Association with the vesicles of the endosomal network also suggested that maspardin may be involved in the sorting and/or trafficking of molecules in the endosomal pathway, a crucial process for maintenance of neuron health. Despite a high conservation in living organisms, studies of maspardin in other animal species than mammals were lacking. In the cotton armyworm Spodoptera littoralis, an insect pest model, analysis of an expressed sequence tag collection from antenna, the olfactory organ, has allowed identifying a maspardin homolog (SlMasp). We have investigated SlMasp tissue distribution and temporal expression by PCR and in situ hybridization techniques. Noteworthy, we found that maspardin was highly expressed in antennae and associated with the structures specialized in odorant detection. We have, in addition, identified maspardin sequences in numerous “nonmammalian” species and described here their phylogenetic analysis in the context of metazoan diversity. We observed a strong conservation of maspardin in metazoans, with surprisingly two independent losses of this gene in two relatively distant ecdysozoan taxa that include major model organisms, i.e., dipterans and nematodes.     

Triploid fetus: An important consideration in the evaluation of very high maternal serum alpha-fetoprotein

Two patients referred for evaluation of very high maternal serum alpha-fetoprotein (10–20 multiples of the median) were carrying triploid fetuses with placentas showing features of partial hydatidiform mole. The diagnosis of fetal triploidy should be considered when there is a very high maternal serum alpha-fetoprotein and no ultrasound evidence of open neural tube defect, ventral wall defect, or any other explanation. Therefore, chromosomal analysis of amniotic fluid cells in such cases is essential.     

Resistance mash welding for joining of copper conductors for electric motors

The automotive industry is developing designs and manufacturing processes for a new generation of electric motors intended for use in hybrid and electric vehicles. This paper is focused on using solid-state welding to join rectangular wires in the fabrication of motor stators. Resistance welding has not typically been applied to copper due to its very high electrical conductivity; however through optimization of the current and pressure profiles, excellent quality copper-to-copper joints have been demonstrated with a technique known as resistance mash welding. A better understanding of resistance mash welding characteristics will help advancements in its application for stators. The limitations of this application will be discussed.     

一种改进的多学习教与学优化算法

针对传统教与学算法在解决复杂多峰函数优化问题时,具有局部最优且搜索开发能力较差的缺点,提出了一种改进的多学习教与学优化算法,新算法为学员的每一维加入不同的教学因子,设计了基于学员均值比较的教师选择策略和向教师及学员学习的多学习策略。基于多个单峰和多峰函数的仿真结果表明,新算法跟传统的、改进的教与学算法相比,在稳定性、寻优精度和收敛速度方面更具优势。