Some Heavy-Metal Pollutants in the Air of Naples

ABSTRACT

In this paper, assumptions regarding future land use as a key uncertainty is considered and its impact on risk analysis for contaminated sites is assessed. Risks are assessed for two land use scenarios (current-use industrial and future-use residential) using probabilistic models that incorporate uncertainty and variability in the exposure parameters. Residual risks are calculated for both industrial and residential cleanup standards. A Superfund site in northern California is considered.

In general, for the unremediated case, the future-use residential scenarios produce larger risks (1 to 3 orders of magnitude) than current- (continued) use industrial scenarios. For the Superfund site studied, the residual risks calculated for the remedy selected was not sufficiently protective of future-use residents in that it did not meet .S. Environmental Protection Agency (EPA) risk goals, but was protective of current-use workers, even though the cleanup criteria were based on residential use. Alternative risk management practices, such as deed restrictions, can be used in such cases.     

Empirical Relationships between Observed Ozone Concentrations and Geographical Areas with Concentrations Likely to Be above 120 ppb

The extent to which existing ozone monitoring data can be used to represent concentrations outside the area immediately surrounding a monitoring station is investigated. The results should be of Interest to those who wish to define areas within which standards are likely to have been exceeded. Relationships are established between the observed second-maximum hour-average ozone concentrations and the area within which It is possible to state with reasonable probability that National Ambient Air Quality Standards (NAAQS) have or have not been exceeded. All pairs of SAROAD stations (Storage and Retrieval of Aerometric Data) separated by 500 km or less which had nearly complete annual data sets were considered for the years 1974 through 1977 to determine the probability that the NAAQS would be exceeded at one station of the pair, given station separation and the observed second-maximum hourly ozone concentration at the other station. The resulting relationship was applied to SAROAD data for 1977, and circles were drawn around each SAROAD monitoring site to show the area within which it is 90% probable that the 120 ppb NAAQS was exceeded during 1977.     

A New Real-Time Isokinetic Dust Mass Monitoring System

A new real-time dust mass monitor has been developed by combining an automatic isokinetic sampling probe with a tapered element oscillating microbalance (TEOM). Fly ash from a room temperature wind tunnel is sampled through the isokinetic sampler and collected on an astroquartz mat filter in the TEOM detector. The filter is first excited and oscillated at low frequency (about 200 Hz). As the particles deposit on the filter, the mass increase of the filter is reflected in a frequency reduction which yields the collected particle mass directly in real time. The TEOM detector normally has a high mass resolution (10^?9 g) and wide dynamic range (105⁵–106⁶). It is desensitized for high particle loading applications. Good agreement has been obtained between the mass collected through the isokinetic sampling system and the weight loss of the dust feeder, in real time. The body of information presented in this paper is directed to those concerned with particle emission and control in fossil fuel combustion systems.     

Blast Furnace Casthouse Control Technology and Recent Emissions Test Data

By the fall of 1980, three new and seven retrofit casthouse emission control systems had been installed in North America. A number of prototype systems are being evaluated by steel companies and regulatory agencies. By 1981, the U.S. steel industry had made commitments to install controls on at least 58 additional casthouses in the U.S.

This paper describes the current status of casthouse control technology in the U.S. and Canada as of the spring of 1981, addresses future trends, and presents emissions test data collected in 1980 and 1981. Mass emissions and inhalable particulate test results from sampling at DOFASCO’s No. 3 blast furnace casthouse are presented. Roof monitor visible emissions data are also provided to describe performance of installed and demonstration systems including three J&L plants, Wheeling-Pittsburgh and Bethlehem Steel, and Inland’s new furnace.     

Biogenic Sulfur Gas Emissions from Soils in Eastern and Southeastern United States

Data are presented for the first systematic measurements of biogenic sulfur gas flux from the major soil orders within the eastern and southeastern United States. Sulfur flux samples were collected and analyzed on-site during the fall of 1977, spring and summer of 1978 and summer of 1979. A total of 27 sampling locales in 17 states were examined. Eight additional sites were visited in 1980.

At some locales, two to four soils were examined, providing an even broader sampling of the soil orders. Three of the locales were revisited two or three times during the course of the study to establish the influence of seasonal climatology upon the measured emission rates and chemical composition of the sulfur flux mixtures.

The sulfur gas enhancement of sulfur-free sweep air passing through dynamic emission flux chambers placed over selected sampling areas was determined by combined cryogenic enrichment sampling and wall-coated, open tubular, capillary column, cryogenic gas chromatography (WCOT/GC) using a sulfur selective, flame photometric detector (FPD).

Sulfur gas mixtures varied with soil order, ambient temperature, insolation, soil moisture, cultivation, and vegetative cover. Statistical analyses indicated strong temperature and soil order relationships for sulfur emissions from soils.

Fluxes ranged from 0.001 g to 1940 g of total sulfur as S/m²/yr. The calculated mean annual sulfur flux, weighted by soil order, was 0.03 g S/m²/yr for the study land area, or 110,872 metric tons (mT). The estimated annual average sulfur flux increased from 65 mT per 6400 km² for the land grids in the northernmost east-west grid tier to an average 1800 mT for the land grids in the southern Florida grid tiers.

This systematic sampling of major soils provides a much broader data base for estimating biogenic sulfur flux than previously reported for isolated intertidal sites, and presents the first sulfur flux estimates for inland soils which make up approximately 93% of the land of the eastern United States.     

Evaluation of Selected Gaseous Halocarbons for Use in source Test Performance Audits

A repository of 38 gaseous organic compounds in compressed gas cylinders has been established by EPA. This repository was established to provide standards for source test performance audits, that is, quantitative quality assurance tests. Among these compounds are ten halogenated organic species, which are the focus of this paper.

Stability studies of all ten compounds have been performed to determine the feasibility of using them as performance audit standards. Results indicate that all of the halocarbons tested are adequately stable to be used as reliable audit standards.

Subsequent to completion of stability studies, four of the ten halocarbons were used in source test performance audits. Results are available at this time for two of the four compounds; the results show agreement within 10% of the concentrations previously established by Research Triangle Institute.     

A Method for Predicting the Effective Volume Resistivity of a Sodium Depleted Fly Ash Layer

Research has been conducted to develop a technique for predicting the effective volume resistivity of a fly ash layer that has been exposed to circumstances leading to a hot-side precipitator problem known as sodium depletion. Eight fly ashes, representing a major portion of U.S. coals, were evaluated by subjecting 0.5 cm ash layers to a continuously applied voltage gradient of 4 kV/cm for periods of time up to 35 days at a temperature of 350°C (662°F). Resistivity was determined at 350°C before the test started and after the long period of applied voltage used to create the sodium depleted situation. In this condition, resistivity was also determined at 280°C (536°F) for an average electric field Intensity of 4 kV/cm and immediately prior to breakdown. This experimental method can be used with any ash sample to estimate resistivity In a sodium depleted condition. But in addition, a correlation resulting from these resistivity data has been developed. This correlation Is combined with an existing technique for predicting resistivity to produce a method for calculating the expected ash layer resistivity after sodium depletion has occurred.     

A Pilot Indoor-Outdoor Study of Organic Particulate Matter and Particulate Mutagenicity

Abstract

Many large metropolitan areas experience elevated concentrations of ground-level ozone pollution during the summertime “smog season”. Local environmental or health agencies often need to make daily air pollution forecasts for public advisories and for input into decisions regarding abatement measures and air quality management. Such forecasts are usually based on statistical relationships between weather conditions and ambient air pollution concentrations. Multivariate linear regression models have been widely used for this purpose, and well-specified regressions can provide reasonable results. However, pollution-weather relationships are typically complex and nonlinear—especially for ozone—properties that might be better captured by neural networks. This study investigates the potential for using neural networks to forecast ozone pollution, as compared to traditional regression models. Multiple regression models and neural networks are examined for a range of cities under different climate and ozone regimes, enabling a comparative study of the two approaches. Model comparison statistics indicate that neural network techniques are somewhat (but not dramatically) better than regression models for daily ozone prediction, and that all types of models are sensitive to different weather-ozone regimes and the role of persistence in aiding predictions.     

Evaluation of RAM Model for Cleveland,Ohio, Part II

Coal combustion is the primary contributor to atmospheric pollution in China, especially so In big cities. Particulate matter and sulfur dioxide are the two main pollutants worthy of attention. Concentration of suspended particles is usually higher in northern cities than in southern cities and higher in winter than in summer. In the case of sulfur dioxide, concentrations are high in the heating season (wintertime) in northern cities, but also in some of the cities in the southwest part of China. Rainfall with pH less than 5.6 occurs mostly to the south of the Yangtze River, especially so in the cities of Chongqing and Gueiyang, and their neighboring areas, and also In the southwest part of China. No acid rain, however, has been found in Beijing and Tianjin. Although the formation of acid rain can thus be thought of as dependent on the presence of enough sulfur dioxide, other factors such as airborne particles and ammonia also play an important role. The difference is, therefore, explained and theorem postulated with supporting data. Ways of abating atmospheric pollution are, in essence, related to improved coal burning; some simple methods are suggested for nationwide control options.