In-Situ Fenton-Like Oxidation of Volatile Organics: Laboratory,Pilot, and Full-Scale Demonstrations

Laboratory, pilot, and full-scale experiments were used to evaluate and optimize the ISOTEC^SM remedial process at a warehousing facility in Union, New Jersey. Based on modified Fenton's oxidative chemistry, the ISOTEC^SM process uses a proprietary catalytic agent that delays formation of reactive hydroxyl radicals. This allows adequate dispersion of the hydroxyl radicals, which is an oxidizing agent, throughout a contaminant plume. Ground-water at the site was contaminated with high levels of gasoline and waste oil constituents, principally BTEX and MTBE. Bench scale microcosm studies were used to evaluate the appropriate site-specific stoichiometric relationships between catalyst, stabilizers, and oxidizers; the effect of contaminant type and concentration; and the pH optima. Based on results of the laboratory studies, a pilot-scale study was performed at the site. One injection point for catalyst, stabilizers, and oxidant was installed in the contaminated zone at the site, with one hydraulically connected downgradient well used for monitoring. A single treatment of the reagents in the optimal stoichiometry determined from the laboratory study was injected in-situ over a period of three days. A 98.5 percent reduction in volatile organics was observed in the area treated, with the radial extent of treatment estimated to be approximately 20 feet, based on the presence of hydroxyl radicals detected in hydraulically connected areas and at the surface. The full-scale process employed six injection points and three treatment cycles over a three-month period. Subsequent to treatment, contaminant levels were either nondetectable or were reduced to below applicable New Jersey groundwater standards, with regulatory closure on the site achieved in less than one year.     

Achieving and maximizing ISM code compliance with ISO 14001

This summer, July 1, 1997, to be exact, marks the deadline for compliance with the International Code for the Safe Management of Ships and Pollution Prevention (ISM Code or simply the Code) as set forth in Chapter IX of the Safety of Life at Sea Convention (SOLAS). As widely reported, enforcement officials in the United States, Australia, and other major flag and port states are promising stepped-up criminal enforcement of marine pollution laws and “zero tolerance” for non-compliance with the ISM Code. The Department of Justice has highlighted this area in enforcement policy announcements, including a statement by the Assistant Attorney General last autumn.¹ Especially given Justice's recent indictments of vessel owners for modest pollution events and these new admonitions, prudent vessel owners will be striving to meet the SOLAS timetable. For shipping firms discerning enough to have successfully navigated a course to certification, the issue instead will be how to sustain safety and environmental management improvement and build on this excellence to advance a broader range of objectives. This article will show how firms in either position may find inspiration in ISO 14001—the environmental management system (EMS) specification developed by the International Organization for Standardization.     

Fever in honeybee colonies

 Honeybees, Apis spp., maintain elevated temperatures inside their nests to accelerate brood development and to facilitate defense against predators. We present an additional defensive function of elevating nest temperature: honeybees generate a brood-comb fever in response to colonial infection by the heat-sensitive pathogen Ascosphaera apis. This response occurs before larvae are killed, suggesting that either honeybee workers detect the infection before symptoms are visible, or that larvae communicate the ingestion of the pathogen. This response is a striking example of convergent evolution between this "superorganism" and other fever-producing animals. Received: 2 September 1999 / Accepted in revised form: 28 February 2000     

Maternal serum alpha-fetoprotein and fetal triploidy

Fetal triploidy is commonly found in early pregnancy. The majority of these pregnancies spontaneously abort in the first trimester. Occasionally, the pregnancy progresses to the second and third trimesters. We reviewed the maternal serum alpha-fetoprotein (MSAFP), amniotic fluid alpha-fetoprotein (AFP), amniotic fluid acetylcholinesterase (ACHE), fetal pathology, and placental pathology in sex second-trimester pregnancies complicated by fetal triploidy. Four of these patients had MSAFP values greater than 7.5 multiples of the median (MoM). Five of six pregnancies had MSAFP values greater than 2.25 MoM. All five of these patients had a partial mole. Four patients had amniotic fluid AFP values greater than 2.0 MoM. Two fetuses had associated neural tube defects. These were the only patients with positive amniotic fluid ACHE. None of the other patients had fetuses with anomalies that are known to be associated with an elevated MSAFP. The elevated MSAFP appeared to be related to the presence of a partial mole. Two of the five cases with an MSAFP greater than 2.25 MoM did not have sonographic evidence of a significant anomaly. Therefore, karyotyping can be of benefit in evaluating patients with elevated MSAFP.     

净损失:瑞典商业性鳕鱼捕捞的政策手段

这篇文章介绍了海洋的过度捕捞,尤其是瑞典鳕鱼的过度捕捞.讨论了如个体捕捞配额、归类及海洋保护区等政策手段.所得出的初步结论是,需要对现行政策手段的结构进行一些调整.关于资源衰退的信息是存在的,但并没有引起重视,反而受到渔民们的抵制.渔民们希望增加捕捞量,同时不断地的获得"政治权势集团"的支持,"政治权势集团"显然更加关心(短期)就业率.所有的争论都发生在不够关心这一问题的普通公众和不甚合作的国际官僚机构的视野中.在这种情况下,所要做的最重大的改革就是要加强渔民们的权利和义务.渔业资源的整体性必须给以绝对的优先权,但通过给予渔民最大限度的具有财产特征的捕捞配额,用渔业资源中更大的利害关系和利益来激发他们的积极性也很重要.     

Stabilization of APC residues from waste incineration with ferrous sulfate on a semi-industrial scale

A stabilization method for air pollution control (APC) residues from municipal solid waste incineration (MSWI) involving mixing of the residue with water and FeSO4 has been demonstrated on a semi-industrial scale on three types of APC residues: a semidry (SD) APC residue, a fly ash (FA), and an FA mixed with sludge (FAS) from a wet flue gas cleaning system. The process was performed in batches of 165-175 kg residue. It generates a wastewater that is highly saline but has a low content of heavy metals such as Cd, Cr, and Pb. The stabilized and raw residues have been subject to a range of leaching tests: the batch leaching test, the pH-static leaching test, the availability test, and the column test. These tests showed that the stabilized residues have remarkably improved leaching properties, especially with respect to Pb but also with respect to Cd, Cu, and Zn. The release of Pb was reduced by a factor of 250-36,000.     

Effects of degree of water saturation on dispersivity and immobile water in sandy soil columns

Three natural nonaggregated soil samples, with similar grain-size distributions, have been used to determine the dispersive behavior of porous media under steady, saturated and unsaturated flow conditions. Tritium was used as a tracer and was found to have no sorption on the solid matrix. Generated breakthrough curves (BTCs) for the unsaturated experiments were symmetrical with no evidence of tailing. The unsaturated experiments for two of the soils were adequately described by considering all the water in the pore volume as mobile. However, about 10% of the pore water, independent of the degree of saturation, was found to be immobile in the case of the third soil during unsaturated flow. For this soil, there was no mass transfer between the two water regions, indicating that the immobile water is essentially isolated from the flowing water fraction. For all three soils, dispersivity under unsaturated conditions was found to be higher, independent of the degree of water saturation, than the value determined for the saturated experiments. This is inconsistent with what would be expected from the simple bundle-of-capillary-tubes model and does not agree well with a more sophisticated conceptualization of the porous medium. The data, however, clearly indicate a wider range in pore-water velocities when these soils are desaturated.     

Spatial characteristics of fine particulate matter: identifying representative monitoring locations in Seattle, Washington

This study investigates how PM2.5 varies spatially and how these spatial characteristics can be used to identify potential monitoring sites that are most representative of the overall ambient exposures to PM2.5 among susceptible populations in the Seattle, WA, area. Data collected at outdoor sites at the homes of participants of a large exposure assessment study were used in this study. Harvard impactors (HIs) were used at 40 outdoor sites throughout the Seattle metropolitan area. Up to six sites at a time were monitored for 10 consecutive 24-hr average periods. A fixed-effect analysis of variance (ANOVA) model that included date and location effects was used to analyze the spatial variability of outdoor PM2.5 concentrations. Both date and location effects were shown to be highly significant, explaining 92% of the variability in outdoor PM2.5 measurements. The day-to-day variability was 10 times higher than the spatial variability between sites. The site mean square was more than twice the error mean square, showing that differences between sites, while modest, are potentially an important contribution to measurement error. Variances of the model residuals and site effects were examined against spatial characteristics of the monitoring sites. The spatial characteristics included elevation, distance from arterials, and distance from major PM2.5 point sources. Results showed that the most representative PM2.5 sites were located at elevations of 80-120 m above sea level, and at distances of 100-300 m from the nearest arterial road. Location relative to industrial PM2.5 sources is not a significant predictor of residential outdoor PM2.5 measurements. Additionally, for sites to be representative of the average population exposures to PM2.5 among those highly susceptible to the health effects of PM2.5, areas of high elderly population density were considered. These representative spatial characteristics were used as multiple, overlapping criteria in a Geographic Information System (GIS) analysis to determine where the most representative sites are located.     

Metabolism and body-burden of PCBs in lactating dairy cows.

This paper uses data from a detailed 4 month PCB mass balance study on lactating cows fed a naturally contaminated background diet to quantify the metabolism and body-burdens of a range of PCB congeners. Dietary intake fluxes and milk and faecal output fluxes reported previously are combined with subcutaneous fat and blood PCB concentrations and with data from tissue/organ samples from a slaughtered animal to estimate the degree of metabolism within the cow. A total body burden is derived, showing that fat deposits account for approximately 98% of total PCB present in the lactating cow. The daily intake through feed (ng day-1) accounted for between 0.9 and 1.5% of the total body burden for persistent congeners (e.g. PCB 153) and up to 43% for those congeners which are readily metabolised (e.g. PCB 52). Detailed balances for a range of tri- to octa-chlorinated PCBs are presented and clearly demonstrate that many congeners are metabolised effectively by lactating dairy cows (e.g. PCB 149) whilst others are efficiently transferred to human dairy food products. An approach to predicting the degree of metabolism for individual PCB congeners is presented which gives good agreement with observations.