原广州氮肥厂地块地下水环境质量评价

对原广州氮肥厂遗留地块浅层地下水环境质量进行调查与评价。结果表明,其整个地块浅层地下水被污染,特别是硫酸车间和造气车间为地下水污染最重区域。主要污染项目为Mn、NH3-N、亚硝酸盐、Fe、总硬度、IMn、SO2-、F-。提出,在作土壤开挖、修复和新建工程项目过程中,工程施工排水应处理后方可排放,以减少对周围环境水体的影响;建筑工人应避免直接接触地下水,施工时佩带手套,做好保护措施,减少皮肤暴露。     

Inexact Fuzzy-Stochastic Programming for Water Resources Management Under Multiple Uncertainties

In this study, an interval-parameter fuzzy-stochastic two-stage programming (IFSTP) approach is developed for irrigation planning within an agriculture system under multiple uncertainties. A concept of the distribution with fuzzy-interval probability (DFIP) is defined to address multiple uncertainties expressed as integration of intervals, fuzzy sets, and probability distributions. IFSTP integrates the interval programming, two-stage stochastic programming, and fuzzy-stochastic programming within a general optimization framework. IFSTP incorporates the pre-regulated water resources management policies directly into its optimization process to analyze various policy scenarios; each scenario has different economic penalty when the promised amounts are not delivered. IFSTP is applied to an irrigation planning in a water resources management system. Solutions from IFSTP provide desired water allocation patterns, which maximize both the system’s benefits and feasibility. The results indicate that reasonable solutions are generated for objective function values and decision variables; thus, a number of decision alternatives can be generated under different levels of stream flows.     

Occurrence of organotins in the Yangtze River and the Jialing River in the urban section of Chongqing, China

The occurrence of organotins in the Yangtze River and the Jialing River in the urban section of Chongqing, China and their impact on drinking water waterworks are reported in this study. Water samples were extracted by solid-phase microextraction and measured using a gas chromatograph with mass spectrometer. The results showed that the rivers studied were polluted by both butyltins and phenyltins and that the butyltin species was the dominant pollutant. Butyltins, especially monobutyltin, were detected in all 18 sampling stations, and phenyltins were detected only in 11 sampling stations. Majority of the organotins were MBTs with concentrations varying from 27.3 to 1,145.8 ng Sn L^?1. Diphenyltin and dibutyltin were the second most common with the highest levels of 113.7 and 202.5 ng Sn L^?1, respectively. Monophenyltin, tributyltin, and triphenyltin had the lowest detection rates with concentration levels of 9.7, 161.8, and 37.2 ng Sn L^?1, respectively. Some of the organotins were also detected in drinking water waterworks, which posed a threat to the water quality of Chongqing.     

Fluctuating asymmetry rather than oxidative stress in <Emphasis Type="Italic">Bufo raddei</Emphasis> can be an accurate indicator of environmental pollution induced by heavy metals

Oxidative stress (OS) and fluctuating asymmetry (FA) as risk markers for environmental stress are widely used to predict changes in the health and fitness of many animals exposed to pollutants. However, from the perspective of protecting declining amphibians, it remains to be verified which one would be a reliable indicator for amphibians exposed to long-term heavy metal pollution under natural conditions. In this study, the OS and FA of Bufo raddei exposed to natural heavy metal pollution were analyzed to determine which marker is more accurate for indicating heavy metal-induced stress. Three years of data were collected during the breeding season of B. raddei from Baiyin (BY), which has been mainly contaminated with Cu, Zn, Pb, and Cd compounds for a long period, and from Liujiaxia (LJX), which is a relatively unpolluted area. Unexpectedly, although significant accumulation of the four heavy metals was found in the kidney and liver of B. raddei from BY, the levels of superoxide dismutase, glutathione peroxidase, and malondialdehyde in these two organs were found to be irregular, with low repeatability in both BY and LJX. However, significant differences in the levels of FA were observed in B. raddei populations from these two areas over the past 3 years (P < 0.01). The degrees of FA in B. raddei populations from BY and LJX were assessed as degree 4 and 1, respectively. In short, this study suggested that FA was a more reliable and effective indicator than OS to monitor and predict long-term environmental stress on anuran amphibians.     

Risk assessment and distribution of soil Pb in Guangdong, China

In this study, the spatial distributions of soil lead (Pb) concentration in three horizontal soils in Guangdong, China, were surveyed and analyzed using geostatistics and geography information systems (GIS). Findings indicated that the Pb geometric mean concentration of 23.3 mg/kg in surface soils was found to be higher than those in global soils, which ranged from 2.3–235 mg/kg. In addition, the Pb geometric mean concentrations from A- to C-horizon were found to be 23.3, 27.2, and 28.6 mg/kg, respectively. The classification of a soil Pb environmental risk in an area was likewise presented based on the different levels of environmental quality of Pb and was done by GIS technology. Accordingly, there is a higher local concentration of Pb in the surrounding areas of Guangzhou where there is higher population density and in the north of Guangdong, which is a historic mining area. The results obtained by the environmental risk assessment reveal that about 46% of total surveyed area was above the background value, that is, 2.7% of the total area was at risk of pollution.     

Using ecological memory as an indicator to monitor the ecological restoration of four forest plantations in subtropical China

A large area of plantations has been established worldwide and especially in China. Evaluating the restoration status of these plantations is essential for their long-term management. Based on our previous work, we used an ecological memory (EM) approach to evaluate four 26-year-old plantations that represent four common kinds of plantations in subtropical China, i.e., mixed broad-leaved plantation (MBP), mixed coniferous plantation (MCP), eucalyptus plantation (EP), and mixed legume plantation (MLP). Comparing them with the regional climax community, i.e., monsoon evergreen broad-leaved forest (BF), all four plantations accumulated nearly the same pattern of EM during succession. EM was >50 % for soil minerals, light conditions, soil age, soil animals, and soil microbes. EM was about 25 % for soil pollen and 10 % for birds, soil seed bank, and plant species. The total EM value of the four plantations ranged from 50.96 to 52.54, which indicated that all four plantations were in the regional, natural trajectory of succession and between the early and medium successional stages. The results indicated that natural succession processes are unlikely to be accelerated by planting late-stage tree species without sufficient EM. The results also demonstrated that all four plantations were in positive successional trajectories, and the positive succession dynamics were greater in the MLP and MCP. We suggest that the entire natural succession trajectory be used to evaluate the restoration of a site and that the ultimate restoration target be divided into several milestones along the reference trajectory to monitor progress. Forest restoration may be accelerated by starting with a minimum dynamic unit supporting sufficient EM.     

A review of mechanochemistry applications in waste management

Mechanochemistry is defined to describe the chemical and physicochemical transformation of substances during the aggregation caused by the mechanical energy. Mechanochemical technology has several advantages, such as simple process, ecological safety and the possibility of obtaining a product in the metastable state. It potentially has a prospective application in pollution remediation and waste management. Therefore, this paper aims to give an overall review of the mechanochemistry applications in waste management and the related mechanisms. Based on our study, the modification of fly ash and asbestos-containing wastes (ACWs) can be achieved by mechanochemical technology. Waste metal oxides can be transformed into easily recyclable sulfide by mechanochemical sulfidization. Besides, the waste plastics and rubbers, which are usually very difficult to be recycled, can also be recycled by mechanochemical technology.     

Determination of organochlorine and organophosphate pesticide residues in fruits,vegetables and sediments

Abstract

A method is described for the determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments. The concentrated solvent extract was sealed in a polymeric membrane tube, dialysed in cyclohexane and the solvent replaced with hexane. The organophosphates were analysed on a specific thermionic detector without further clean‐up. For the organochlorine pesticides the extract was eluted through 3 g of alumina and analysed on GC/ECD. The clean‐up for sediment extract was carried out on a10 g alumina column with 100 mL hexane containing 5% acetone and the eluate was concentrated to 5 mL.

The detection limit for organophosphates on a 40 g sample and a final volume of 10 mL was on the average 0.01 mg/kg. The detection limit for organochlorine pesticides, with the final volume of 25 mL, was 0.005 mg/kg for all pesticides except for p,p'‐DDT and endosulfan sulphate, which was 0.01 mg/kg.

The detection limit for oganochlorine pesticides in sediment, with the final volume of 2 mL, was less than 1 μg/kg and for organophosphate pesticides less than 10 μg/kg when the final volume was made to 0.5 mL. At the detection limits the method produced a very high coefficient of variation for both organochlorine and organophosphate pesticides.     

Crystallization and Mechanical Properties of Recycled Poly(ethylene terephthalate) Toughened by Styrene–Ethylene/Butylenes–Styrene Elastomer

Recycled poly(ethylene terephthalate) (R-PET) was blended with 15–30 wt% of styrene–ethylene/butylenes–styrene (SEBS) block copolymer and maleic anhydride grafted SEBS (SEBS-g-MA). Effects of nucleation and toughening of the elastomers were evaluated systematically by study of morphology, crystallization, thermal and mechanical properties of the blend. The addition of 30 wt% SEBS promoted the formation of co-continuous structure of the blend and caused the fracture mechanism to change from strain softening to strain hardening. Addition of SEBS-g-MA resulted in significant modification of phase morphology and obviously improved the impact strength. The compatibilization reaction of PET with SEBS-g-MA accelerated the crystallization of PET and increased the crystallinity. The shifts in glass transition temperature of PET towards that of SEBS-g-MA and the higher modulus for R-PET/SEBS-g-MA (70/30) blend found by DMA are also indications of better interactions under the conditions of compatibilization and interpenetrating structure.