Male choice,fighting ability,assortative mating and the intensity of sexual selection in the milkweed longhorn beetle,Tetraopes tetraophthalmus (Coleoptera,Cerambycidae)

Summary Over five hundred adult longhorn milkweed beetles, Tetraopes tetraophthalmus, were individually marked and their copulatory success followed for one month in a pasture of Asclepias syriaca in northern Indiana, USA. Migration of beetles from the field site was greatest from areas of low population density. Dispersal was significantly greater for males experiencing low copulatory success; a similar but nonsignificant trend was observed for females. Large males, which displayed greater site tenacity than small males, copulated more frequently than small males because of their ability to displace small males from females. Both large and small males demonstrated a preference for large females in laboratory tests. Male preference in combination with aggressive displacement of small males results in size-assortative mating which was much stronger under conditions of high population density. It contributes to variance in male reproductive success since female size is known to be correlated with fecundity and offspring viability. Variance in copulatory success is similar for males and females, suggesting that both sexes experience similar intensities of sexual selection with respect to this component of reproductive success. Futhermore, comparison of this with other studies suggests that the intensity of sexual selection among males is positively correlated with the variance in body size which appears to be under both stabilizing and directional sexual selection in males but not in females.     

Experimental and natural changes in the peacock's (Pavo cristatus) train can affect mating success

Petrie et al. (1991) demonstrated a correlation between the degree of elaboration of peacocks' trains and their mating success, and also showed that this correlation occurred because females preferred to mate with the male that had the most elaborate train of those sampled on the lek. Although these data suggest that female choice is responsible for non-random mating in this species, they do not conclusively show that train morphology is the cue that females respond to, because they do not rule out the possible influence of another unidentified variable which is correlated with train elaboration. This paper presents an experimental test of the importance of the peacock's train in determining male mating success. If the number or arrangement of eye-spots in the peacock's train influences mating success, then changing the number of eye-spots should change mating success. This prediction was tested in an experiment where the trains of male peafowl (Pavo cristatus) were manipulated by removing a number of eye-spots between mating seasons. Peacocks with eye-spots removed showed a significant decline in mating success between seasons compared with a control group. This result, together with the observational data, supports the hypothesis that the peacock's train has evolved, at least in part, as a result of female choice.     

pH dependence of ferrous sorption onto two smectite clays

This work examines the abilities of two smectite minerals (SWa-1 and Wyoming montmorillonite) to adsorb ferrous iron at concentrations from 0.037 mM (2 ppm) to 2.5 mM (240 ppm) over a range of pHs from 4.0 to 8.0. Both sorption isotherm and sorption edge data are presented. Ferrous sorption (Fe(aq)2+ = 0.1 mM) to both SWa-1 and Wyoming montmorillonite over the pH range 4.0-6.75 is relatively constant at approximately 1000 l kg(-1) for both minerals. Sorption in this pH range is attributed to the cation exchange capacity of the clay along the basal surfaces. At pH values above 6.75 the amount of ferrous iron sorbed increases dramatically. At pH 8, sorption (Fe(aq)+ = 0.1 mM) reaches 6600 l kg(-1) and 8000 l kg(-1) for Swa-1 and Wyoming montmorillonite respectively. This is attributed to the specific interaction between ferrous ions and surface sites along mineral edges. The overriding geochemical implication is that in reduced sediments containing more than a few percent clay, the pool of sorbed ferrous iron is vast. This pool of reduced iron is both redox labile and bio-available and is not readily indicated by simple measurement of dissolved Fe2+.     

Changes in concentration of five PCDD/F congeners after cooking beef from treated cattle

A large piece of meat taken from a single animal, which had been dosed with five selected PCDD/Fs, was prepared and cooked by a selection of different methods; burgers (fried, grilled, barbecued), roasts (cooked using conventional and microwave ovens) and stews (open pan and pressure cooked). For some of the cooking methods, concentration changes, on a whole product basis, were observed between raw and cooked product. However, in all cases these could be explained simply through changes arising from loss of water and elimination of PCDD/Fs with released fat. The total amounts of PCDD/Fs present in the system (including in released fat) remained unchanged. Dietary intake of PCDD/Fs could therefore be reduced by the removal of visible fat from meat before cooking and by discarding any fat released from foods during the cooking process.     

Growth and nutrition of Quercus rubra L. seedlings and mature trees after three seasons of ozone exposure

Seedling growth and nutritional status have been shown to be sensitive to ozone, but the influence of multi-season ozone exposure on mature tree growth and nutrition has not been examined. To determine if seedlings and mature trees were similarly affected by ozone exposure, growth and nutrient concentrations in northern red oak (Quercus rubra L.) 4-year-old seedlings and 32-year-old mature trees were examined after treatment with subambient, ambient and twice ambient concentrations of ozone for three growing seasons. SUM00 values summed over the three growing seasons were 147, 255 and 507 ppm-h, respectively, for the subambient, ambient and twice ambient exposures. For mature trees, no influence of ozone treatment on lower stem diameter growth, stem growth within the mid-canopy and foliar biomass was observed. Seedling height was increased by ozone, but biomass and diameter were unaffected. A reduction in the specific leaf weight of leaves in response to ozone coincident with the loss of recurrent flushing was observed in seedlings. Ozone exposure reduced foliar nitrogen concentrations and increased woody tissue nutrient concentrations in seedlings and mature trees at the end of the third growing season. These results suggest an influence of ozone on retranslocation processes in seedlings and mature trees.     

An experimental soft-release of oil-spill rehabilitated American coots (Fulica americana): I. Lingering effects on survival, condition and behavior

In spring 1995, we studied survival, condition and behavior of 37 oiled/rehabilitated (OR) American coots (Fulica americana) (RHB) and compared them to 38 wild-caught, non-oiled and non-rehabilitated coots (REF). All coots were wing-clipped to prevent long-range dispersal, mixed equally and randomly and soft-released into two fenced marshes. Twenty RHB+20 REF coots were subjected to handling and sampling four times during the 4-month study and the remainder were left undisturbed. The study ended before any coots dispersed following remige regrowth. Overall survival was significantly lower for RHB coots, regardless of the way survival was viewed (four Chi 2 tests varied between p<0.045 and p<0.006). Mortality was 2.1 times higher in RHB coots: 51% mortality in RHB coots and 24% in REF coots (4 months total). RHB coots began the experiment 9% lighter in mean body condition indices (BCI=a standardization that corrected for different-sized birds) than REF coots, but REF coots also needed a period of adjustment to captivity. BCIs then varied (p<0.02) similarly among both groups throughout the experiment. Initially, RHB coots lost more weight in comparison to REF coots (although RHB coots fed more), but those RHB coots that did survive recovered to REF-comparable BCIs after about 6 weeks: both higher and equivalent at the beginning of moult and then both equivalent but lower through the moulting period. Long-term RHB coot and REF coot survivors both had significant (p<0.001) positive correlations between their initial and ending body weights. A similar relationship was also suggested for the non-surviving REF coots, but could not be tested for statistical significance. In contrast to all other groups, however, non-surviving RHB coots failed to show any relationship between their initial and ending body weights (p>0.10), indicating that non-surviving RHB coots were unable to gain or maintain body condition for about 2-3 months following their oiling/rehabilitation experience. Throughout the experiment, RHB coots preened more on water and on land, bathed more, slept less during the day, and exhibited feeding and drinking behaviors more frequently or of greater duration than REF coots (all statistical tests with Bonferroni-corrected p<0.05).     

Degradation of RPA 202248 [U-14C-phenyl]alpha(-(cyclopropylcarbonyl)-2-(methylsulfonyl)-beta-oxo-4-(trifluromethyl)benzenepropanenitrile), the primary degradation product of isoxaflutole, in an outdoor aquatic microcosm system

Isoxaflutole, the active ingredient in BALANCE WDG and BALANCE PRO corn herbicides and a co-formulant with the herbicide flufenacet in the product EPIC, is readily degraded in soil and water to RPA 202248 alpha(-(cyclopropylcarbonyl)-2-(methyvlsulfonyl)-beta-oxo-4-(trifluromethyl)benzenepropanenitrile). Because RPA 202248 is responsible at the molecular level for isoxaflutole's herbicidal activity it is important to understand the environmental behavior of the degradation product. Laboratory studies suggest that RPA 202248 is stable to hydrolysis and photolysis in aqueous systems and hence poses a possible environmental concern. As part of a program of work towards understanding the actual field situation, an outdoor microcosm study was carried out. Over the course of the 29-day study, residues remained predominantly in the aqueous phase. A slow but steady degradation of RPA 202248 was observed leading to the formation of RPA 203328 (2-methylsulfonyl-4-trifluoromethylbenzoic acid), which has no herbicidal activity. The half-life of RPA 202248 was calculated to be 103 days. These findings indicate that aqueous degradation should be considered as a potential route of dissipation when assessing the fate of RPA 202248 in large scale impounded water bodies, such as ponds, lakes, or reservoirs in the Mid-West Corn Belt.     

Development of a hazardous air pollutants monitoring program using the Data Quality Objectives process

To effectively reduce the environmental compliance costs associated with meeting hazardous air pollutant emission requirements, the U.S. Environmental Protection Agency's Data Quality Objective (DQO) process has been proposed as a suitable framework for establishing a defensible monitoring program. Through the use of a hazardous materials pilot study, the variability in the composite vapor pressure for regulated handwipe cleaning solvents was established. These results served as inputs to the DQO process, which identified that for facility decision-makers to claim with a 99% confidence level that the facility is in compliance with the National Emission Standards for Hazardous Air Pollutants (NESHAP), a minimum of 12 handwipe cleaning solvent compliance samples (taken at random every 6 months) must have a composite vapor pressure equal to or below the regulatory limit of 45 mmHg at 20 degrees C. Implementation of the DQO-based compliance-sampling plan eliminates the need for an affected facility to sample all regulated handwipe cleaning solvents while still maintaining a reasonably high level of confidence in the compliance status of its regulated sources. The approach described for designing a defensible compliance sampling plan can be extended to other aspects of the aerospace NESHAP rule, including compliance sampling for surface coating, chemical depainting, and hazardous waste disposal.     

The estimation of PAH bioavailability in contaminated sediments using hydroxypropyl-beta-cyclodextrin and Triton X-100 extraction techniques

A study was conducted to investigate whether cyclodextrins and surfactants can be used to predict polycyclic aromatic hydrocarbon (PAH) bioavailability in contaminated sediments. Two sediment samples were extracted with aqueous solutions of hydroxypropyl-beta-cyclodextrin (HPCD) and Triton X-100. PAH removal during extraction was compared with PAH removal during biodegradation and solid-phase extraction. The latter two methods were used as reference methods to establish which part of the PAHs could be biodegraded and to what extent biodegradation was governed by bioavailability limitations. It was demonstrated that HPCD extraction followed solid-phase extraction and removed primarily readily bioavailable PAHs, while Triton X-100 extracted both readily and poorly bioavailable PAHs. Moreover, HPCD did not affect the degradation of PAHs in biodegradation experiments, while Triton X-100 enhanced the degradation of low molecular weight PAHs. It was concluded that HPCD extraction may provide a good method for the prediction of PAH bioavailability. Triton X-100 extraction is unfit for the prediction of PAH bioavailability.     

The effect of diesel fuel sulfur content on particulate matter emissions for a nonroad diesel generator

The effect of sulfur content on diesel particulate matter (DPM) emissions was studied using a diesel generator (Generac Model SD080, rated at 80 kW) as the emission source to simulate nonroad diesel emissions. A load simulator was used to apply loads to the generator at 0, 25, 50, and 75 kW, respectively. Three diesel fuels containing 500, 2100, and 3700 ppm sulfur by weight were selected as generator fuels. The U.S. Environmental Protection Agency sampling Method 5 "Determination of Particulate Matter Emissions from Stationary Sources" together with Method 1A "Sample and Velocity Traverses for Stationary Sources with Small Stacks or Ducts" was adopted as a reference method for measurement of the exhaust gas flow rate and DPM mass concentration. The effects of various parameters on DPM concentration have been studied, such as fuel sulfur contents, engine loads, and fuel usage rates. The increase of average DPM concentrations from 3.9 mg/Nm3 (n cubic meter) at 0 kW to 36.8 mg/Nm3 at 75 kW is strongly correlated with the increase of applied loads and sulfur content in the diesel fuel, whereas the fuel consumption rates are only a function of applied loads. An empirical correlation for estimating DPM concentration is obtained when fuel sulfur content and engine loads are known for these types of generators: Y = Zm(alphaX + beta), where Y is the DPM concentration, mg/m3, Z is the fuel sulfur content, ppm(w) (limited to 500-3700 ppm(w)), X is the applied load, kW, m is the constant, 0.407, alpha and beta are the numerical coefficients, 0.0118 +/- 0.0028 (95% confidence interval) and 0.4535 +/- 0.1288 (95% confidence interval), respectively.