用于CO2捕集的Mg(OH)2粉末溶解速率

氢氧化镁是一种正在研究的用于脱除烟气中低浓度CO2的化学吸收剂。为了掌握工业用氢氧化镁粉末的溶解速率,利用缓冲溶液,在不改变溶液体积的情况下对不同悬浊液浓度、溶液温度、溶液pH值和搅拌速率情况下的氢氧化镁粉末溶解速率进行了研究。提高悬浊液浓度、提高溶液温度、降低溶液pH值和提高搅拌速率均能增大氢氧化镁的溶解速率。悬浊液浓度从0.1 mol/L增加到1 mol/L时,溶解速率增大了2.2倍;温度从23℃增加到52℃时,溶解速率增大了4.3～9.5倍;pH值从9.8降低到6.6时,溶解速率增大了78～225倍;搅拌速率从350 r/min增加到700 r/min时,溶解速率增大了1～2倍。     

The internal microstructure and fibrous mineralogy of fly ash from coal-burning power stations

Coal fly ash (CFA) is a significant environmental pollutant that presents a respiratory hazard when airborne. Although previous studies have identified the mineral components of CFA, there is a paucity of information on the structural habits of these minerals. Samples from UK, Polish and Chinese power stations were studied to further our understanding of the factors that affect CFA geochemistry and mineralogy. ICP-MS, FE-SEM/EDX, XRD, and laser diffraction were used to study physicochemical characteristics. Analysis revealed important differences in the elemental compositions and particle size distributions of samples between sites. Microscopy of HF acid-etched CFA revealed the mullite present possesses a fibrous habit; fibres ranged in length between 1 and 10 μm. Respirable particles (<10 μm) were frequently observed to contain fibrous mullite. We propose that the biopersistence of these refractory fibres in the lung environment could be contributing towards chronic lung diseases seen in communities and individuals continually exposed to high levels of CFA.     

Novel Mercury Oxidant and Sorbent for Mercury Emissions Control from Coal-fired Power Plants

The authors have successfully developed novel efficient and cost-effective sorbent and oxidant for removing mercury from power plant flue gases. These sorbent and oxidant offer great promise for controlling mercury emissions from coal-fired power plants burning a wide range of coals including bituminous, sub-bituminous, and lignite coals. A preliminary analysis from the bench-scale test results shows that this new sorbent will be thermally more stable and cost-effective in comparison with any promoted mercury sorbents currently available in the marketplace. In addition to the sorbent, an excellent elemental mercury (Hg(0)) oxidant has also been developed, and will enable coal-fired power plants equipped with wet scrubbers to simultaneously control their mercury emissions as well as their sulfur oxides emissions. This will work by converting all elemental mercury to an oxidized form which will be removed by the wet scrubber. This will result in significant cost savings for mercury emissions control to the atmosphere, and will help in keeping electric costs low. The sorbent and oxidant will benefit from the utilization of a waste stream from the printed circuit board (PCB) industry, and would thus be environmentally beneficial to both of the utility and electronics industries. The sorbent also demonstrated thermal stability up to 350°C, suggesting a possibility of an application in pulverized coal-fired power plants equipped with hot-side electrostatic precipitators and coal gasification plants.     

In situ bioreactors and deep drain-pipe installation to reduce nitrate losses in artificially drained fields

Nitrate in water removed from fields by subsurface drain ('tile') systems is often at concentrations exceeding the 10 mg N L(-1) maximum contaminant level (MCL) set by the USEPA for drinking water and has been implicated in contributing to the hypoxia problem within the northern Gulf of Mexico. Because previous research shows that N fertilizer management alone is not sufficient for reducing NO(3) concentrations in subsurface drainage below the MCL, additional approaches are needed. In this field study, we compared the NO(3) losses in tile drainage from a conventional drainage system (CN) consisting of a free-flowing pipe installed 1.2 m below the soil surface to losses in tile drainage from two alternative drainage designs. The alternative treatments were a deep tile (DT), where the tile drain was installed 0.6 m deeper than the conventional tile depth, but with the outlet maintained at 1.2 m, and a denitrification wall (DW), where trenches excavated parallel to the tile and filled with woodchips serve as additional carbon sources to increase denitrification. Four replicate 30.5- by 42.7-m field plots were installed for each treatment in 1999 and a corn-soybean rotation initiated in 2000. Over 5 yr (2001-2005) the tile flow from the DW treatment had annual average NO(3) concentrations significantly lower than the CN treatment (8.8 vs. 22.1 mg N L(-1)). This represented an annual reduction in NO(3) mass loss of 29 kg N ha(-1) or a 55% reduction in nitrate mass lost in tile drainage for the DW treatment. The DT treatment did not consistently lower NO(3) concentrations, nor reduce the annual NO(3) mass loss in drainage. The DT treatment did exhibit lower NO(3) concentrations in tile drainage than the CN treatment during late summer when tile flow rates were minimal. There was no difference in crop yields for any of the treatments. Thus, denitrification walls are able to substantially reduce NO(3) concentrations in tile drainage for at least 5 yr.     

Ground-Cover Measurements: Assessing Correlation Among Aerial and Ground-Based Methods

Wyoming’s Green Mountain Common Allotment is public land providing livestock forage, wildlife habitat, and unfenced solitude, amid other ecological services. It is also the center of ongoing debate over USDI Bureau of Land Management’s (BLM) adjudication of land uses. Monitoring resource use is a BLM responsibility, but conventional monitoring is inadequate for the vast areas encompassed in this and other public-land units. New monitoring methods are needed that will reduce monitoring costs. An understanding of data-set relationships among old and new methods is also needed. This study compared two conventional methods with two remote sensing methods using images captured from two meters and 100 meters above ground level from a camera stand (a ground, image-based method) and a light airplane (an aerial, image-based method). Image analysis used SamplePoint or VegMeasure software. Aerial methods allowed for increased sampling intensity at low cost relative to the time and travel required by ground methods. Costs to acquire the aerial imagery and measure ground cover on 162 aerial samples representing 9000 ha were less than $3000. The four highest correlations among data sets for bare ground—the ground-cover characteristic yielding the highest correlations (r)—ranged from 0.76 to 0.85 and included ground with ground, ground with aerial, and aerial with aerial data-set associations. We conclude that our aerial surveys are a cost-effective monitoring method, that ground with aerial data-set correlations can be equal to, or greater than those among ground-based data sets, and that bare ground should continue to be investigated and tested for use as a key indicator of rangeland health.     

More than money: how multiple factors influence householder participation in at-source stormwater management

Urban stormwater run-off is a threat to stream ecosystems. New approaches to stormwater management aim to protect urban streams from such impacts, by retaining, treating and using stormwater at its source. As up to ～50% of runoff from urban surfaces comes from private property, fostering stormwater retention requires effective householder engagement. We evaluated householder participation in the Little Stringybark Creek project, a stormwater retrofit programme aimed at waterway protection, using qualitative enquiry through formal and informal interviews to identify factors that influenced participation. Participation was governed by multiple factors, with financial incentives and personal co-benefits of tanks primary motivators, while process complexity and distrust were primary barriers. Results suggest an approach combining education to encourage review of subjective norms and attitudes, with incentives to mitigate behavioural controls can transform public behaviour towards sustainable stormwater management.     

Assessing the spatial distribution of grassland age in a marginal European landscape

Grassland age is increasingly recognised to be an indicator for present-day biodiversity, e.g. plant species richness, and is also important for other landscape functions. We developed a methodological approach to systematically assess the spatial distribution of grassland age in marginal European landscapes. This approach - applied to the Lahn-Dill Highlands (1270 km(2)), a marginal landscape in Hesse, Germany - comprises three steps: (1) in a two-stage stratification process, we pre-stratified the study area according to recent land-cover patterns and their changes between 1955 and 1995 (stratification I) and classified grassland types by combining data on soil moisture, base-richness, and elevation (stratification II). From 50 grassland types, we randomly selected 1000 representative grassland patches. (2) We determined the age of these patches by means of aerial photograph interpretation of a chronosequence dating back to 1953 and classified each patch with respect to the age classes young (<18 years), mid-aged (18-47 years), and old (>47 years). (3) Based on this information, we calculated grassland type-specific probabilities for grassland patches to belong to the respective age classes. These probabilities were projected to districts by direct extrapolation. An exemplary validation of extrapolation results for two test areas was performed. The results revealed that 49% of the investigated patches were old grassland. The remaining patches were mid-aged (36%) or young grassland (15%). The extrapolation results indicated accordingly a predominance of old grassland at the district scale. Occurrences of mid-aged grassland were concentrated in districts with a pronounced land-cover change, whereas young grassland is apparently evenly distributed across the study area. Validation results suggest that our approach is suitable for a realistic estimation of grassland age in marginal European landscapes. The method may be applied in landscape models of various disciplines that rely on large-scale information on grassland age.     

A Tool for Automated Load Duration Curve Creation1

Abstract: A recent study by the Texas Bacteria Total Maximum Daily Load (TMDL) Task Force has recommended the use of load duration curves as a primary tool in calculating bacterial TMDLs. This method is attractive because it effectively integrates flow regimes into TMDL analyses, clearly communicates data through a method that is understandable to the general public, and has been successfully applied in TMDL studies in other states. To ease the creation of load duration curves, an automated load duration curve creation tool called LDCurve has been created within a Microsoft Excel framework. Web services and a webscraper are used to retrieve U.S. Geological Survey streamflow data and Texas Commission on Environmental Quality water quality data. Data are imported to the spreadsheet, combined to create flow and load duration curves, and plotted. Final steps result in a preliminary estimate of the overall load reductions needed to meet water quality standards in the modeled segment. LDCurve is currently only applicable in the state of Texas, but may be updated to model water quality throughout the nation using analogous web services from the EPA STORET database. By using automated data retrievals and computations, the LDCurve tool reduces the amount of time required to create curves and calculate load reductions to a matter of minutes. LDCurve and all supporting materials are available online for free download at: http://tools.crwr.utexas.edu/LDCurve/ .     

Distribution of sulfamethazine, chlortetracycline and tylosin in manure and soil of Canadian feedlots after subtherapeutic use in cattle

Feedlots are potential point sources for the flow of antibiotics into the environment due to common use of antibiotics such as sulfamethazine, chlortetracycline and tylosin. Hence soils and manures originating from a grassland control, an experimental and a commercial feedlot were analyzed and mass balances were calculated for these antibiotics. Up to 9990 μg kg⁻¹ sulfamethazine and 401 μg kg⁻¹ chlortetracycline on a dry matter basis were determined in feedlot manure. Soil concentrations were two orders of magnitude smaller. This corresponds to 7-40% of the calculated residual amount. In the commercial feedlot chlortetracycline was found down to soil depths of −40 cm; sulfamethazine was still detectable 1 year after medication. Sulfamethazine and chlortetracycline were additionally determined in manure of a control treatment in the experimental feedlot where cattle never received antibiotics. This was attributed to runoff from upslope pens. Consequently, antibiotics partially persist within feedlots and may be dislocated into the surrounding environment by vertical transport and runoff.