Multivariate statistical characterization of water quality in Lake Lanier, Georgia, USA

Watershed monitoring programs depend on water quality characterization data collected for many parameters, at many times and places, and with limited resources. Our objective is to present a strategy that reduces the measured parameters, locations, and frequency without compromising the quality of the monitoring program. One year of twice-monthly (growing season) and monthly (dormant season) water quality data collected from 17 lake and 10 tributary sites are used in conjunction with multivariate statistical techniques to improve the utility of collected data by identifying key parameters and monitoring locations. Factor analysis shows that tributary water quality data consists of three components-stormwater runoff, municipal and industrial discharges, and ground water-which can be distinguished using total suspended solids, total dissolved solids, and alkalinity plus soluble reactive P, respectively. Lake water quality characterization is more ambiguous than tributary water quality characterization, but factor analysis indicates that anoxia associated with lake stratification is the largest source of lake water quality variation, followed by nutrient abundance, and finally by biomass abundance. Cluster analysis suggests that tributary and lake monitoring stations can be consolidated. Reducing the number of parameters and stations frees up resources for increased monitoring elsewhere.     

Incident investigation of mono-nitro toluene still explosion

At one of the nitro-toluene facilities, an o-nitro toluene still was in standby mode. During the standby mode feed to the still had been stopped, the column was not de-inventoried, steam flow to the reboiler was not shut off and the condenser was on total reflux. After 22 days of standby mode, steam was shut off for 5 days for annual plant maintenance. Eight days after the re-start of steam, the still exploded, hurling debris as far as one mile. The internal packing was expelled from the column and landed on the ground burning. The incident was investigated to establish the contributing factors leading to explosion. Accelerating Rate Calorimetery was extensively used to determine the onset temperature for exothermic activity in the presence/absence of a number of materials to establish the underlying cause of the accident. It was found that foulant collected in the column over a period of years accelerated the ’runaway reaction’.     

USING SUBSURFACE DRIP IRRIGATION FOR ALFALFA1

ABSTRACT: A test of the suitability of subsurface drip irrigation (SDI) for alfalfa (Medicago sativa L) compared to a sprinkler, was conducted on a Kansas producer's field where the soil is loam. The treatments included drip tape spacing of 60, 40, and 30 inches placed at depths of 18 and 12 inches. A nearby plot irrigated by a center pivot sprinkler was seeded to alfalfa and used for comparison. Seedling emergence and yield were adversely affected at 60 inch spacing, while the depth of placement of drip tapes (18 and 12 inches) showed no effect on yield. The site served for education and allowed comparison between SDI tape spacing and center pivot system.     

A practical approach to steam‐enhanced dual‐phase extraction: A case study

This article presents the results of a pilot test that was conducted to determine the effectiveness of using steam‐enhanced dual‐phase extraction (DPE) at a former industrial site in New York. The pilot test proved that steam‐enhanced DPE was very effective at removing significant contaminant mass from the subsurface in a relatively short time period. Concentrations of volatile organic compounds and semivolatile organic compounds in the vapor stream and groundwater were successfully reduced, in some cases by orders of magnitude. Based on the results of the steam‐enhanced DPE pilot test, the final remedy for the site includes implementing this technology at selected areas as an alternative to DPE alone or other remedial alternatives, such as excavation or groundwater pump and treat. © 2003 Wiley Periodicals, Inc.     

Identifying hydrologically sensitive areas: bridging the gap between science and application

Researchers have noted that current water quality protection strategies, like nutrient management plans, lack a sound hydrological underpinning for pollutant transport processes. This is especially true for areas like the northeastern U.S. where copious research has shown that variable source area hydrology largely governs runoff generation. The goal of this study was to develop a scientifically justified method to identify the locations that generate overland flow. Furthermore, this methodology must be computationally simple enough that it can be utilized or incorporated into nutrient management plans and other established water quality tools. We specifically tested the reliability of the 'distance from a stream,'D(s), and the 'topographic index,'lambda, to predict areas with a high propensity for generating overland flow, i.e. hydrologically sensitive areas (HSA). HSAs were defined by their probability of generating runoff, P(sat), based on 30 year simulations using a physically based hydrological model. Using GIS, each location's P(sat) was correlated with D(s) and lambda. We used three Delaware Co., NY watersheds in the New York City watershed system with areas varying in size from 1.6 to 37 km2 and with forested and agricultural land uses. The topographic index gave stronger, more regionally consistent correlations with P(sat) than did D(s). Equations correlating lambda and P(sat) for each month are presented and can be used to estimate hydrological sensitivity in the region surrounding our study watersheds, i.e. in Delaware Co. This work is currently being incorporated into an Internet Mapping System to facilitate user-friendly, on-line identification of HSAs.     

Persistent organic pollutants in Alaskan ringed seal (Phoca hispida) and walrus (Odobenus rosmarus) blubber

Since 1987, the Alaska Marine Mammal Tissue Archival Project (AMMTAP) has collected tissues from 18 marine mammal species. Specimens are archived in the National Institute of Standards and Technology's National Biomonitoring Specimen Bank (NIST-NBSB). AMMTAP has collected blubber, liver and/or kidney specimens from a number of ringed seals (Phoca hispida) from the areas near Nome and Barrow, Alaska and walruses (Odobenus rosmarus) from several locations in the Bering Sea. Thirty-three ringed seal and 15 walrus blubber samples from the NIST-NBSB were analyzed for persistent organic pollutants (POPs). The compounds determined included PCBs (28 congeners or congener groups), DDT and related compounds, hexachlorobenzene (HCB), hexachlorocyclohexane isomers (HCHs), chlordanes, dieldrin, and mirex. POP concentrations in ringed seal blubber were significantly higher in Barrow than in Nome when statistically accounting for the interaction of age and gender; HCB, however, was not statistically different between the two locations. Unlike males, POP concentrations and age were not significantly correlated in females probably as a result of lactational loss. POP concentrations in walrus blubber were lower than in ringed seal blubber for SigmaPCBs, chlordanes, and HCHs, but higher for dieldrin and mirex. POP concentrations in ringed seals and walrus from Alaska provide further evidence that the western Arctic tends to have lower or similar POP concentrations compared to the eastern Canadian Arctic.     

Emission rates of chlorinated volatile organics from new and used consumer products found during vapor intrusion investigations: Impact on indoor air concentrations

Consumer products can emit chlorinated volatile organic compounds (CVOCs) that complicate vapor intrusion (VI) assessments. Assessment protocols acknowledge the need to remove these products during VI investigations, but they can be problematic to identify and locate. Predicting if the products cause detectable air concentrations is also difficult since emission rate information is limited and can vary with product use and age. In this study, the emission rates of 1,2-dichloroethane, trichloroethene, tetrachloroethene, and carbon tetrachloride from four consumer products identified as indoor sources during VI field investigations were measured under laboratory conditions using a flow through system. Emissions of PCE from an adhesive container tube ranged from 1.33 ± 1.13 μg/min (unopened) to 23.9 ± 2.93 μg/min (previously opened). The laboratory-measured emission rates were used to estimate indoor air concentrations, which were then compared to concentrations measured after the products placed were into an actual residence. The estimated and measured indoor air concentrations were generally comparable, showing that emission rate information can be used to determine the relative impact of internal CVOC sources.     

High Sediment Oxygen Demand Within an Instream Swamp in Southern Georgia: Implications for Low Dissolved Oxygen Levels in Coastal Blackwater Streams1

Todd, M. Jason, George Vellidis, R. Richard Lowrance, and Catherine M. Pringle, 2009. High Sediment Oxygen Demand Within an Instream Swamp in Southern Georgia: Implications for Low Dissolved Oxygen Levels in Coastal Blackwater Streams. Journal of the American Water Resources Association (JAWRA) 45(6):1493‐1507. Abstract: Sediment oxygen demand (SOD) is considered a critical and dominant sink for dissolved oxygen (DO) in many river systems including blackwater streams and is often poorly investigated or roughly estimated in oxygen budgets. The purposes of this study are to (1) characterize and document the magnitude and variability of SOD in representative instream swamps found on the Georgia Coastal Plain; (2) predict SOD from more readily measured parameters such as soil, sediment, and litter organic carbon; and (3) obtain an accurate representation of SOD values within this understudied habitat to help improve water quality models and the continued development of DO as an appropriate water quality standard. Results show SOD rates ranging from 0.491 to 14.189 g O₂/m²/day, up to 18 times higher than values reported for southeastern sandy‐bottomed streams and suggest that instream swamps are repositories of large amounts of organic matter and are thus areas of intense oxygen demand and a major factor in determining the oxygen balance of the watershed as a whole. These areas of intense oxygen demand in relatively unimpacted areas indicate that low DO concentrations may be a natural phenomenon. SOD rates were significantly correlated (alpha = 0.05) with a number of sediment parameters, with organic carbon and total organic carbon being the best predictors of SOD rate. When developing water quality models, managers should pay closer attention to the influence of SOD as it plays a critical role in determining DO levels within instream swamps and the river system.     

The acceptability of CO2 capture and storage (CCS) in Europe: An assessment of the key determining factors: Part 1. Scientific,technical and economic dimensions

The ACCSEPT project, which ran from January 2006 to December 2007, identified and analysed the main factors which have been influencing the emergence of CO₂ capture and geological storage (CCS) within the European Union (EU). The key clusters of factors concern science and technology, law and regulation, economics, and social acceptance. These factors have been analysed through interviews, a large-scale questionnaire conducted in 2006, and discussions in two stakeholder workshops (2006 and 2007). In Part I of this paper, we aim to distil the key messages and findings with regards to scientific, technical, legal and economic issues. There are no compelling scientific, technical, legal, or economic reasons why CCS could not be widely deployed in the forthcoming decades as part of a package of climate change mitigation options. In order to facilitate this deployment, governments at both the EU and Member State levels have an important role to play, in particular in establishing a robust and transparent legal framework (e.g. governing long-term environmental liability) and a strong policy framework providing sufficient and long-term incentives for CCS and CO₂ transportation networks.     

Risk communication and sustainability science: lessons from the field

Sustainability science aims to help societies across the globe address the increased environmental and health crises and risks that range from poverty to climate change to health pandemics. With the increased magnitude and frequency of these large-scale risks to different societies, scientists and institutions have increasingly recognized the need for improved communication and collaboration among researchers, governments, businesses, and communities. This article argues that risk communication has fundamentally important contributions to make to sustainability science’s mission to create use-inspired, “actionable science” that can lead to solutions. Risk communication research can advance the mission of sustainability science to engage a wide range of stakeholders. This kind of engagement is especially important in the context of addressing sustainability problems that are characterized by high levels of uncertainty and complexity. We introduce three core tenets of risk communication research that are fundamental to advancing sustainability science. Risk communication specifically offers an increased understanding of how system feedbacks, human perceptions, and levels of uncertainty influence the study and design of solutions within social ecological systems.